FORD EDGE FRONT BRAKE PADS REPLACEMENT. DISC BRAKE ROTOR REPLACEMENT REMOVAL

FORD EDGE FRONT BRAKE PADS REPLACEMENT. DISC BRAKE ROTOR REPLACEMENT REMOVAL
In this video we will show you how to replace the front brake pads and brake disc rotor on Ford EDGE ( ALWAYS CONSULT your manual for your specific model, year, and configuration). We demonstrated the front brake pads and disc rotor replacement on a 2007 Ford Edge front wheel drive.
This video might be helpful on ( ALWAYS CONSULT your manual for your specific model, year, and configuration) :
2007 Ford Edge Front Brakes Replacement. Front Brake Pads Disc Rotor Replacement
2008 Ford Edge Front Brakes Replacement. Front Brake Pads Disc Rotor Replacement
2009 Ford Edge Front Brakes Replacement. Front Brake Pads Disc Rotor Replacement
2010 Ford Edge Front Brakes Replacement. Front Brake Pads Disc Rotor Replacement
► Front Brake Pads: amzn.to/33bHQkD
► Torque Wrench 1/2: amzn.to/2YpdZGz
► Torque Wrench 3/8: amzn.to/2KfaVUK
► Brake Grease: amzn.to/31nNO0d
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@robertingram2820]

Hey Guys...thanks... you helped me save like $300 plus I was able to order good quality replacement rotors and pads for front of 2011 edge...good job... appreciated.

[@nathanhosey1278]

Thumbs up for hanging the caliper by wire! Great tip!

[@seanmcmann2784]

Guys, THANK YOU SO MUCH for a very helpful video! I knocked this job out in a few hours thanks to your very precise directions. I'm a subscriber now and really thankful for your channel! Keep it up!

[@jsco8692]

Straight up. Good images. Thanks

[@jasjithayer4887]

Very helpful tutorial, to the point.

[@timetryp422]

Some mechanics claim you should open the bleeder screw when compressing the old pads in order to avoid pushing contaminated brake fluid into the ABS pump. That could jam up the valves and cause the ABS light to come on. Apparently the ABS pump is not serviceable.

[@edgardoamoros3042]

before compressing the brake cylinders, open brake fluid resivour

[@mvd4436]

schitt. i was gonna do that. probably better for the system

[@alejandroyepes766]

How do u do that?

[@eyeorewolf]

It's vented,

[@mitchpol1432]

thank you for the specs. very informative. i have this car and i have problems with a skid icon not sure what could be. maybe the traction, its been on for a year and wont ago away. it turns on after i start driving.

[@sean.forsberg]

Similar problem with mine. You can try hooking it up to an OBD2 reader and likely get a code reading that may return something like "ABS/Wheel speed sensor" along with which one. At the very least it's a way to focus your attention on which wheel/system is involved. You may end up just needing to clean that sensor or replace it pretty easily for about $20.

[@mitchpol1432]

Sean Forsberg you know, I was told that too, could be dirty but idk how to clean it, do I have to disconnect the cable and spray it with that sprayer that cleans connectors?

[@sean.forsberg]

It could be the sensor itself, which is easier to access behind the wheel, or the connection, or, it could be something else entirely like the tone ring that the sensor reads. Figuring out which wheel is effected will give you a starting point, then you can try cleaning the sensor and inspecting the tone ring for cracks/damage/debris. If that does nothing then you can try checking/cleaning the sensor connection or simply changing the sensor out with a new one. At least if that fails it's a pretty cheap way to determine it's caused by something else.

[@Henry4PC]

What’s the torque specs?

[@dean3184]

why use a breaker bar instead of the impact wrench?

[@user-ep9vh4xx4k]

Hello friend, I have a question, please answer. I have a Ford Edge, this car is very rare in my country, so there are not enough spare parts. Maybe you know which brands or models can be identical !! Mazda, Toyota, Subaru, Grand Cheork, Suzuki, Mercedes, BMW Nissan and so on.

[@edcreasia8961]

I've got a 2015 dodge journey 3.6L . When compressing the caliper piston to make room for the new pads does that also require bleeding the ABS system so the pedal doesn't go to the floor? I just did a power bleed with a "MOTIVE POWER BLEEDER" about a month ago, I had to do this because I had about 3% moisture in the system. But now, I'm about to replace the rotors and pads and I would like to know if Its necessary to do a bleed on the ABS system. I watched your video on replacement of pads and rotors and I didn't hear you mention anything about bleeding the ABS system.

[@macfisher4004]

You should only need to bleed brakes if you replace lines, calipers or open it in some way to let air in.

[@Gerv401]

Will 2017 Ford edge front rotors will that fit on a 2017 Ford edge appreciate if you hit me back with the answer

[@mustacheparty79]

Drinking game - take a shot everytime he says "Guys"

[@vankgary]

Are the rotors on the front and on the back different sizes? if so what are the sizes?

[@TheAerosmith3]

They should be the same. If you get on RockAuto's website, they have all the parts you need. Just enter your make and model

[@NoNo_IStay]

They're all standard size

[@carlosbruk9469]

What accent is that?

[@eyeorewolf]

You reused the old boots, they will deteriorate, leak and the guide pins will rust and lock up the caliper.

[@thewiseguy7100]

Not true.

[@barrysmith1654]

You don't have to say " guys" 100 times

[@mustacheparty79]

I took a shot after everytime he said guys. I died before he took the caliper off