FORD EXPLORER 4.0 ENGINE REPLACEMENT PART 2

Welcome back to part 2 of the adventures with my wife's Ford Explorer. Join me as I finish replacing the engine and get this thing back up and running! This video is meant to be for entertainment purposes only, so its not going to be a step by step instructional. Hopefully you'll enjoy it!
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
**********************************************************************
*If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/adva...
Thank you so much for your support!
***********************************************************************
Visit our Amazon store here www.amazon.com...
to shop for our channels recommended tools and gadgets!
************************************************************************
*You can email your questions and concerns to [e-mail]
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto.

[@johnr.803]

Man, you are some hard working dude!

[@themechanic6117]

Man you're a soldier!! I didnt think you would get it running that night. 👍👍💪

[@ADVANCEDLEVELAUTO]

I was extremely sore the next day. I think the heat exhaustion made me sick. Thanks for watching!

[@gabrielesparza3585]

I have a 2014 sport trac. I don't want to quit on it. I've gone through 2 transmissions and all kinds of other shit.

[@timrowe8123]

Your daughter just stole the show. Enjoy these days brother, when they’re small.

[@gregeconomeier1476]

It warms my heart watching the kids all over the project. It would be interesting to have a "question meter" keeping track of how many questions are being asked. Brings back fond memories.

[@ADVANCEDLEVELAUTO]

Tons of questions. She learned the difference between a bolt and a nut, also what washers are used for.

[@prmayner]

Looks like the heads have been replaced with those heat tabs on them. great job, OH SO GLAD TO BE RETIRED!! What memories you have brought back. Congrats.

[@13maxjax]

Your daughter was a great help. That was cool.

[@DIYDaveOK]

Major props to you, dad, for letting that precious daughter of yours help out. She's a sweetie. Dad is the most important job!! 😁

[@Teleflexx]

Your work ethic and analytical skills are supreme. So many times I've come across electrical ghosts in my cars. I enjoy watching you overcome those nagging electrical and system issues that plague most cars made today. Keep on fighting the good fight!

[@robertgregilovich2229]

Lots of respect guy. Tough job for to do in a repair facility, to do outside takes perseverance. Hats off to you. Hope it lasts.

[@billrimmer5596]

Man o man!!! U ain’t just a prima donna Hy Tech Scan Boy. U know how to get it on down and dirty. Loved the Allen wrench trick!! U must of got it pretty near perfect otherwise u would have set a cam crank correlation code. Doing that on the floor with a creeper was not easy. Super impressed!! Lovely family!!!

[@jum5238]

Actually, I think it would have been hard to be off by much if you just eyeballed it. The space between the teeth on the chain would have needed several degrees to be off for it to even get to the next tooth. But good trick with the allen key and bolt!

[@billrimmer5596]

@@jum5238 As long as he didn't loosen the sprocket. They have no keyway. I think

[@johnaclark1]

Well done! Glad to see that thing running again. I'm glad I'm not the only one who will pull and all-nighter finishing a car...without even any food. I have a feeling we'll be seeing more of your assistant. She stayed on task throughout that entire hoist assembly. She's got the bug!

[@amateurfisherman4431]

Eric it’s always great to watch you work on cars, you sure do have great skills.

[@solowtex]

Wow you can do more in a day than I can in a week. Respect man.

[@RotoRCol]

me in a month

[@westfield90]

You are such a talented hard working genuine guy. I wish you so much success and happiness in 2021. God bless you and your family.

[@johnminor2496]

I am not a technician. However, I know when a man knows what he is doing. You know what you are doing and you work your butt off!! GOD bless you and your family.

[@ADVANCEDLEVELAUTO]

Thank you and God bless!

[@brianjohnston9822]

Kudos to using the instruction manual for the hoist assembly. Lot of mechanics would tough it out.

[@mygoat1]

That’s tuff to do in a drive way. Respect

[@cbforme]

At least he lives in a state with little to no rust. This would be a lot harder in the rust belt

[@jamesgoforth1606]

@@cbforme Absolutely -- looked like a new car underneath.

[@snoopsnoop5]

You better pay your little assistant, she know what she's doing!!

[@ADVANCEDLEVELAUTO]

She gets paid in LOL Dolls!

[@spelunkerd]

Man you're a hard worker, it is not easy trying to work for somebody like that (yourself). Tired and hungry is a bad combination. Great job, fun video.

[@ADVANCEDLEVELAUTO]

I appreciate that

[@wolfnorth7075]

Hi man I am a Chinese living in Texas, I always am amazed by Mexican's life. My life is the opposite of your. Thanks for your video, your little daughter is so adorable.

[@jonathanbox3033]

Congrats on getting that thing back together! Those 4.0 S.O.H.C. engines are a nightmare to work on.

[@dylanawyzykowski677]

I know this a old a$$ comment but they are really easy if you know what your doing lol

[@38911bytefree]

Love your little girl having fun assembling the engine hoist =). Superb job and patience !!!!!!.

[@Arcturan]

You got yourself a good little helper there.

[@dcpsdrivers]

My wife would be proud. You read the directions... :)

[@tiredoldmechanic1791]

I found this video series very helpful. I learned never to buy a Ford with a 4.0.

[@d13cab]

You work really hard for your family good luck too you all 👍

[@trewyatt2159]

Thats cute man. My daughter is always outside with me to lend a helping hand too.

[@jorgetoloza269]

Great video , very well explained..I got a smile when the little Girl appeared, thought about my own Daughter..thanks for the video..

[@josedejesusvelazquez6863]

you really have done a TITANIC job. my admiration and respect for what you did in this car may God bless you and your beautiful daughter. from Tijuana 🇲🇽 Mexico. 👍👍👍

[@Codwak16]

Great to see you still working hope things are going well

[@roxanneabbott8424]

Thoroughly entertaining, thank you great job!!!

[@ADVANCEDLEVELAUTO]

Glad you enjoyed it!

[@xaviergalarza5187]

Great great job my friend, I learned a lot and the best thing is when u work for yourself is better

[@bigjnsa]

Good helper! I get my daughter all the time to pass me tools

[@armandomunoz6518]

Good job bro

[@amigan34]

Very useful video, I will subscribe to this channel because my ford explorer 2009 really gave me a nightmare here in Dubai mainly due to dishonest mechanics.

[@joetterolison1286]

Great finds and solutions for the DYI guys

[@on-site4094]

That exploder is clean underneath here in the great white north you need a torch to remove most bolts the rust. stay safe Eric you jave a great apprentice I'm glad you survived the engine swap nightmare 👍

[@ADVANCEDLEVELAUTO]

I'm grateful that we don't have to deal with rust much down here.

[@wetriedthisproductreviews8306]

Your an amazing mechanic man ,love this channel.

[@mr.h182]

without even watching , BIG LIKEEEE! ,,,, i like your work and learn much from you man big thankxxx

[@raulflores1247]

Great video. I'm glad thing are falling into place for you.

[@williamwhite9767]

Thank you for the video! Enjoyed it! I've been told when buying an engine from a salvage yard be wary of the car donors that were overturned because you don't know if the engine ran with the car upside down with no oil pressure. Seems like you did well though. Really cute helper! Know you are proud!

[@JennHawk]

Glad to finally see the conclusion to the explorer revival.

[@cruzmgt]

I BOW to the grand master. Good video my Latino Brother !!!

[@nicholasosborn6334]

Great job sir. Love the video. Might be in my future at some point. Appreciate you taking the time to put it together

[@falconau11]

Incredible effort well done

[@gflores7018]

Awesome , looks good. Lot of work

[@ADVANCEDLEVELAUTO]

Thanks 👍

[@vincescalise4821]

Great work,sorry you had so many issues ,your daughter is a sweetheart

[@rosss11]

Good thing your a mechanic and can do it your self

[@MrAmk3rd]

Another entertaining vid! Looks like you have the same problem i have, everything seems to become bigger and more of a whipping, I've learned a simple job takes forever and i need to add time in the planning before i start. 🙄🙄🤣🤣 Keep em coming. 👍👍🤘🤘

[@Raorl173]

Jesus! How many hands do you have, the camera work is perfect!! Very cool content

[@combatmedic3347]

Yes, you have earned my subscription! Like your effort and style!

[@ralphmadera4366]

I am really happy for this accomplishment, thanks 🙏 for posting.

[@brianfinn7644]

Hey at least with the alternator wire issue you won’t have to dig up wiring diagrams since well you did it! 😃

[@MrLuke3427]

Great Job bro wish you the best .

[@mauriciodelacruz7009]

Good job as always brother

[@Automotive_Solutions]

3am finish. Tough day. Respect 👍

[@andrewvillanueva4222]

Awesome job bro. Love your videos.

[@rsaba]

Your videos are awsome ! thanks for sharing

[@50calops]

Well done sir, thanks for the content.

[@stealthg35infiniti94]

Good job Eric! You're a hard worker that needs all the Lord's blessings....Be sure to use only 100% synthetic oil to prevent the sludge from happening in that engine...If you're on a budget, use the Walmart Super Tech Synthetic oil...It's a very good oil for the price without going crazy price of the name brands...

[@ADVANCEDLEVELAUTO]

Thanks for the tip!

[@davidgoliath982]

yup i think super tech oils are just fine. wal mart can sell it for the $ they do because they buy massive amounts and put it in their own jugs. it meets or exceeds the latest API standards

[@DIYDaveOK]

Here's another shout out on the Super Tech. Produced by Williams Oil and it's perfectly good stuff!!

[@darenhouser427]

I have one even better. Watch a guy on YT called Farm Project. He actually performed a test between all of the synthetic oils. They’re basically all the same. Look at the labels on all the bottles. Again, basically the same.

[@ישראל-ג1י]

Excellent video, well done.

[@fire7765]

Great job, you are the man.

[@jimmyFX]

Good job on timing jig,,I had the same issue, I had to swap engine in 04 sportrac ,because of timing guides falling apart, shops up here wanted 2 to 2.5 k to swap engine,,so I took it upon myself,,it took me around 26 hours..you know when u do it yourself,just think of the money u save and the quality of job done.👍

[@kakashi32001]

Tengo un problema igual con una 2006 mismo ruido ,,y supuestamente mi mecanico decia que solo era el temsor delante de la cadena,,y que se lo cambio ,,hoy que manejo la camioneta veo que sgue con el mismo problema ,,cuando voy en alta velocidad no hay problema ,pero cuando llego a una luz o paro la camionte empieza ese sonido como "cascabeleo" y no se le quita hasta que le piso el gas {acelerador} y desaparece,croeo que es del mismo problema. gracis brother por tu esfuerzo ,tu habilidad y conocimiento, me ayudo mucho a comprender este gran problema.

[@garychester6571]

One hell of a good job.

[@x01e]

I have been waiting for part2 .. loved the video.

[@Tony-dc7ry]

Nice work , good video

[@PhillyDee215]

Nice progress👍

[@alaautotonics4403]

well done bro amazing god bless you

[@mikechiodetti4482]

You got it! On to the next project. Good work!

[@RR-bt5xv]

great job and great video

[@rafaeltorovip]

Mucho trabajo. A lot of work. Changing an engine is not easy. 👌

[@sjn7220]

Impressive and well done!

[@HondariderLee]

Nice job there

[@1986yamahafazer69]

Nice job! 👍🏻.

[@garymartin8619]

Great job sir

[@ME-kv8ew]

You are the man. As always great job!

[@nigelellen3703]

Grate job and well done.

[@richardcranium5839]

fordtechmakuloco did a video on the timing chains r&r on that engine. i like your hex key improvising. neat trick.

[@formekinetics691]

Northwest Houston... Crowded!

[@THEDRAGONBOOSTER8]

GREAT WORK..

[@PauloJRSantos]

It was amazing! You just save a Mustang. Like i said before you have gold in your hands

[@mrg4238]

Wow great job

[@mikebegay6177]

Enjoy your show. Thank you. Need help with my 94 caprice cooling fan. Trying to fix my car before my cancer treatment in 2 days. Let me know if anyone wants to help.

[@rogelioortega144]

Good job 👍

[@dealerauctionnightmare4689]

FordTechMakuloco has videos for replacing the chains on these. Tells you everything about this. IIRC you have to remove the jackshaft to get that gear out.....I may be totally wrong though.

[@gparcero]

hermano te felicito por tan excelente trabajo. saludos desde bogotá!

[@la.2207]

Hey bro great video

[@danman9017]

thanks for sharing ,glad you had help

[@neverstoplearning382]

Respect. Bravo master.

[@erniehenshaw4161]

Good Job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@blackericdenice]

When you buy an engine from a junkyard. If they say it has 65k miles. It has 135k miles. If they say it has 100k miles. It has 150k miles.

[@cruzmgt]

She's the TINY GRAND MASTER in auto repair :)

[@ADVANCEDLEVELAUTO]

She always wants to help. I just wish my son had the same interests.

[@raulcontes5533]

i understand:such a thecnical job,the beeeestt!!!!!

[@scottyjones27]

Gee Wizz !!! That was a job!!!

[@saltydog7006]

I just did a timing chain on a 4.0 and you have take out the shaft to get the cog out and that bolt you took out is a one time use bolt

[@VictorNoelCoryPaz]

awesome job! 🐾

[@CubasAutomotive]

Wow! Hardly any rust under there.... anywhere! What I wouldn't give to see some vehicles like that! Lol

[@CubasAutomotive]

Dang.... you have Northern tool by you! LUCKY!. Yeah, that's the Mustang's common state, at least around here. Young kids think they know how to drive, speed, and not used to the rear wheel drive vehicles.

[@ADVANCEDLEVELAUTO]

I'm grateful that we don't have to deal with rust down here. Thanks for watching!

[@markamcampbell6340]

and mama is happy. that's the most important part.

[@TheTiny474]

Jackshaft has to be pulled forward . And that means replacing front chains . I just did that job . You need the tool to time engine. Ebay has tool for 80 dollars . Well worth money .