Ford F-150 Starter Replacement Walkthrough

In this video I walk you through replacing the starter motor on a Ford F-150.
The only remanufactured starters I Recommend: (check fitment guide)
amzn.to/3slXgjZ
Forscan is a free Ford Specific Diagnostic Software:
Download Here-
forscan.org/home.html
ELM 327 Adapter I Recommend-
amzn.to/2GC6dBj
As an Amazon Associate I earn from qualifying purchases.
My Ford Specialty Shop: BSG Automotive-
www.bsgautomotive.com
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

[@FordTechMakuloco]

The only remanufactured starters I Recommend: (check fitment guide) amzn.to/3slXgjZ Forscan is a free Ford Specific Diagnostic Software: Download Here- forscan.org/home.html ELM 327 Adapter I Recommend- amzn.to/2GC6dBj As an Amazon Associate I earn from qualifying purchases.

[@marcjorgensen]

Ford said they only carried the Mororcraft reman, said they couldn't even get new for my 6.2. Were they misinformed? I got the Motorcraft!

[@techguy9023]

The one listed on Amazon said it didn’t fit my 2016 F250 6.2

[@GlassGarza]

😂

[@Jim.D]

Very helpful video, watched it 2 years ago and it helped me yesterday when it died at my local post office. 2 hours to remove the starter, walked it 1/4 mile down the road to a local rebuilder, he rebuilt it in 30 minutes, then I reinstalled it in less than 30 minutes. Thanks for all the great tips!

[@klikliks_service]

Been watching your videos a lot lately. I'm a diesel tech of 15 years and I just wanted to say I have a lot of respect for you and your videos. Always professional and always informative.

[@tyrannusspissamentum4423]

Not sure how he makes it through them all without swearing. Unless it's all off camera lol.

[@K1LL3RGRN]

I love the fact that Ford put the solenoid on the bottom instead of where it normally is. It really gets in the way of getting to that top bolt

[@Akasuper]

Just removed the old starter on my 2004 f150 3v. The top bolt can absolutely go to hell! Thanks for the great video FTM

[@JoshuaCasso]

That third bolt is from hell.

[@dcmkcbbq]

Thanks for the very helpful video. Some other observations I made during my 6 hours swear fest were- 1. 2 3" extensions rather than 1 6" worked better for me on the top bolt. The 2 3" extensions are about 1/2" shorter and let me back out the bolt almost all the way out of the hole before pinching the ratchet on the frame. 2. when working on the top bolt I found it easiest to have my body 90 degrees to the truck with my feet at the drivers side door. That allowed my hands to follow the curve of the starter easier to located the top bolt. 3. a 12 point socket is a lot easier to got on the top bolt to remove it. 4. If you are having a problem getting on the bolt, check for debris on top of the starter that might interfere with the socket. 5. Give each bolt hole a couple of short blasts of brake cleaner to help to remove any grit from the holes. 6. Make sure the neighborhood kids aren't around while you are replacing the starter. Good luck to all why try this.

[@JAM9307]

The two 3” extensions instead of one 6” helped a lot with the 1/4 drive. 2017 F150.

[@timharder9555]

I did the 2 3 inchers too. Worked better but had to use a wobble adapter too. Easily the worst starter iv ever tackled

[@nuttynut54]

I'm on day2 trying to change this starter on my buddy's f150, gots the 4.6 2v and the top bolts being a bitch to get at. And all the 3bolts are different on the starter 13mm the bottom, middle bolts gots a half inch and the top is a 10mm with no room to get a ratchet on even with 2 3"" extensions so idk what too do now ,, plus the exhaust manifolds on the way to go by the side

[@jgk10000]

The single 6” extension worked for me. But idk how this feller had both hands up in the main area. I peeled my fender liner back until I could fold it behind the tire (didn’t try to do it gently, 17 yo truck who cares) then I snaked my left hand up there and over the frame palm up to guide socket to that top bolt. It seems impossible until all of the sudden you get it seated and then the bolt is out after 10 minutes of 5° turns. Now you think the worst is behind you until you’re holding the new starter trying to get the bolts threaded wtf

[@willpower3692]

@@timharder9555I’ve done my Honda Crv, about to tackle the ford. I’ll let you know which is worse. At least you don’t have to remove the air cleaner, and coil pack.

[@whitley2825]

Thank you so much for making this guide! I was able to fix my 97 f-150 all by myself (and I have never replaced anything ever). You saved me a ton of money. Now my truck, Buddy, can go another 420,000 miles! Maybe..

[@davidherrera267]

Your video was very helpful and informative. I've never changed the starter before my life, and found myself in the unfortunate situation of having to learn. Your video made it manageable, thanks for uploading.

[@jaysmechs2457]

This is honestly as good as a video on the notorious f150 starter can get. I have a 2012 Mustang and it's the same PITA with no space to fully torque anything. Really a ford thing. Thumbs up from me.

[@jaypezynavarro9534]

I literally fumbled with all sorts of combinations of extensions untill I saw Brian’s video and I was like wow the most simple combo 6” plus a short socket damm should of known thanks for your video!

[@johnw8103]

Nicely done, bud! I've been following you for awhile now and you do great walk throughs and taught me a lot! Thank you sir, for what you do.

[@TheMeanWolverine]

This was my first time watching one of your videos. I would say great job on providing incite and details regarding the tools, sizes and lengths that you recommend. Just an fyi for those here, my truck is a 2007 f150 5.4 motor. The little braided ground wire from the solenoid to the starter was rusted in half. Truck had turned over more slowly then normal several times over the summer but I didn't look into it at the time:(( Today it was 6 degrees outside and today is when the starter failed completely. No heated shop, no lift and no power tools. So not to bore anyone here is the best information that I have to share and it worked FANTASTIC. I ended up using a much smaller ratchet than anyone noted on this thread that I have seen. I will try to include a pic but here is the long and short of it... pun intended... is the ratchet I used is five inches long overall with a swivel head. To that I connected a 2 7/8" 3/8" drive extension, a 3/8" to 1/2" adapter and a deep well 1/2 drive 12 point socket. Overall dimensions were 6 3/4" for the ratchet, extension, adapter and socket. Oh and the top bolt took me less than five minuets to remove. The short ratchet allowed me to get one half of a revolution on each motion. It was the first time I danced under my truck after I got the top bolt out. Thanks again for the video, you got me on the right track. PS I tried to attach a pic without success. Sorry

[@rwzwiefka]

heading out to the driveway today in michigan to change my starter in my '03 Ford. Thanks for posting this video! I have never done one before, and in the cold its not going to be easy... appreciate the information you gave.

[@peterheiser2247]

I always look for your videos when I need to work on my truck. Your were perfect with all of the information. Especially the need to have and use a 1/4 drive. Thank you.

[@JamesSmith-no7fr]

Thanks much for your video. As with all your videos, well presented and right on the money. On my 2006 Ford LTD 5.4L, there was no way to get my hand up and over the starter motor for the top bolt. To solve the problem of access, I took off the wheel well shield and went in under the exhaust manifold from the top. I used a 9" extension on a 3/8ths inch with a swivel head connector. Just enough friction to break torque and just enough visibility to see the bolt . Cheers and Thanks Much.

[@Jeff-sc1df]

As usual, you make it look easy. I do not look forward to this on my '05 5.4 Great job 👏

[@vince2997]

I have the same year and engine except on a Expedition. Was it hard to do or does it take a good chuck of the day to get to?

[@vince2997]

@@claudrasberry8467 😂 lol

[@stevenhambly6121]

Its just shy of hell.but its possible.i think.

[@nopleaseno2515]

2006 F150 2hrs in, 4 bolts twisted off, 2 of them in the housing. I’m in the rust belt. Absolutely ridiculous engineering. I hate ford, hate!

[@dillhole3852]

I really appreciate your videos! I fixed my truck after watching one for the fuel inlet fault. Thank you!

[@iambrian81]

I don't even need to do this yet but I love watching your vidoes on the F150's. I have a 2004 and I am sure I will be doing some these sooner or later. I didn't attempt the spark plugs and let a professional do it. I do wish you lived near me in Florida though to diagnose a ticking noise under my truck. Love the videos. Keep em coming.

[@19baitmaster51]

5.4 tick is usually cam phasors.

[@cameronlemke4902]

Thank you so much!😂 I had the right tools but I kept missing that top bolt and can’t get it but seeing the angle you went from I think I can get it a lot easier now, mines a 2004 tho but same set up basically

[@whowantstoknow4371]

This video was so helpful to us we changed our own starter. Thank you so much for sharing great video.

[@skyartrc8286]

i always watch your videos to learn from you on ford trucks, you explain everthing so easily,thanks

[@rejmonwilson]

trick that I did, when replacing my starter, (I placed a piece of electricity tape over the hole on the top hole on the new starter, stick the bolt through it, which holds the bolt in place put the starter in place, this really make reinstall the top bolt easy to install). it is a pain but be patient, also check the starter cable wire harness. I live in Canada my wire harness was very corroded. Great video really help me to tackle this job.

[@Will-216]

I can’t. My bolt/holes are pretty much the ground for the starter. I have an old school mechanical starter.

[@aarodriguez1984]

Great video! Changed my dads stater on his 2007 f150 in about an hour. Very tight fit for sure but patience was the key. Thanks again!

[@missyconway9265]

Great video. My 03 occasionally wont start, sounds like starter, just a dead click sound. This video will help with my replacement, thanks

[@jdreaper2176]

I have a 1999 ford f150 4x4. Replaced my starter in 1 hour flat. Watched your video first made it alot easier. Thanks !! Love your videos. Spotted a broke off exhaust stud. My next project and next video you have. ✌👍

[@CanadianCampPurr]

Just bought a 2012 F150 thursday from a ford dealership, friday morning in costco parking lot, truck would not start. Towing company tried to boost the battery only one click told me it was the starter. Nice to have a 3yr warranty!!!. Great video!!!

[@bcluwms]

Thanks for the advice on the extensions for getting the bolts out. That was much appreciated. Great instructions.

[@jrhdz3585]

Thank you for taking the time to make this video it was very helpful.

[@kellyconstenius676]

This must be fake CG generated. No way you get under there and NOT come up with a few new words to ad to the urban dictionary.

[@luisdelatorre6333]

Cg means computer generated so you're saying computer generated generated

[@terrywood114]

Great video, l have changed many on the many fords I have owned. I didn't know if I could get starter out of such tight area until I seen your video. Im use to the old ones like me lol. Thankyou.

[@allgun1]

Very helpful video, it took me 3 hours to remove the top bolt, my hand was bleeding there is just not enough room just to give my advice remove the solenoid there are 2 Philips screws and the solenoid pulls right out, now you have more room for your hands but it is still not easy to get to the bolt. I also used a short flexhead ratchet fine tooth. Good luck

[@marcjorgensen]

Makuloco to the rescue again! Thanks so much man, you really saved me some time. It still took me a couple of hours mainly because of having to take fatigue breaks. My starter failure on my 2012 Raptor was very unique. One of the solder points on the S terminal on the solonoid had broken loose you could move the terminal plate around and the starter would connect, even saw small arcing. Great video, second time I've used one of your walk through's. Leadframe the other! Really helpful channel

[@bowlweevil4161]

great video good photography and explained very well, if you get a cordless ratchet those bolts and nuts will come off quick, I have turned wrenches for 50 years and that cordless ratchet is one of the handiest tools i have come across especially on tear down THANX!

[@1cbjack]

Good clear video, great instructions!

[@AzKaraokeVic]

Thanks for putting up the video. Yours is one of the most well lit and clearest I could find. You made removing that 3rd bolt look easy. I had a helluva time trying to get my socket on it because I couldn't get two hands up there. My front steering linkage and trans cooling lines were in the way. I finally pulled out my digital inspection endoscope and that saved me.

[@nobodyimportant5485]

I have this exact same problem. I had a steel plate that I also had to remove to get more access. I was finally able to snap a pic of the third bolt with my phone but need to find a combination of extensions that will allow me to get to that bolt. They definitely make it easy on the 5.4L engines!

[@McGregor007]

God bless your heart for this video. You saved Christmas for my family with this one pal.

[@deontaedwardsmoneygenerato6533]

i just did my starter replacement on my ford F-150 and the videos was so helpful thank you.

[@patavatar267]

This helped me with my 2004 F150 4.6. Thank you.

[@johnlong384]

Thanks for mentioning the nut sizes and the tight area on top of the starter in your nice info-clip. I have to do this on a neighbors 2007 F 150 and wanted take the right tools to her 'two-mile-away-house'. Take care and try to stay out of trouble!

[@schnoebelen2333]

Wow just got done replacing my 07 starter you make it look easy my friend and might I add awesome video

[@Junkboy888]

Great Video, lol The setting reminds me of working on my Cars in the Dorm parking lot in the Military. lol

[@mikeaylward9402]

Spot on! Spot on! Save me arse! I don't have flex-head ratchets & it made the project lengthy & difficult. I did take off the RF tire to give me some more room. Top bolt was a beyotch but coming in from the passenger side helped a ton. My truck is an '07, so the cross-member on the frame made accessibility even tougher. But, thanks. There are several "F150 starter" videos on KZbin, but yours helped the most by far! Again, thanks!

[@johnsegard2948]

Just changed mine with the help of your video. Once again thank you.

[@RonnieG99]

This is the best one by far. Thanks dude.

[@donaldtuttle8400]

Thanks for the video. Out of all the videos yours was the most helpful. Your awesome bro

[@blazekai23]

Thank you so much, your one of the only ones who showed the step by step

[@vladimirmacko1481]

I love your videos man, I just love them! You're one of the best if not the best out there.

[@ouchthathurts4076]

Thank you bro. I just watched you're vid. And my roommates 98 ford f250 is working. I'm a Chef by trade. And it's so rewarding being able to fix something when you dont know how. Beer time!!!

[@jeffreyallen3777]

Did mine yesterday. I took off the passenger side wheel like others have done. I have big hands and have a real hard time getting them into that tight gap around the starter. Also if you position a light right you'll be able to see the bolt which helps a lot. It is a little extra work to take off the wheel and the plastic well sheild, but if you've never removed one before it might be worth it. You can get the bolt with a 6 inch extension and a wobbler or a similar arrangement depending on what you have for tools. I electrical tape the wobbler flex joint to stiffen it up so you can easily position it onto the bolt without it flopping around and you can actually see what you're doing. Once you get that one off it's easy if you have a decent selection of wrenches. Definetly wire brush your bolts well and use antiseize as well as recommended and you will find the reassembly will go much better. I put a generous amount of antiseize onto the bolt and turn them into the holes before reinstalling the starter to reduce the chance of misthreading the soft aluminum. I use nickel based antiseize which works really well on aluminum castings. If you think this project is really hard replace your exhaust manifolds first and it will seem much easier.

[@rototiller78]

Yeah, when you replace the passenger side exhaust manifold and gasket you have to remove the starter to get the room needed to do the exhaust manifold job

[@corvettebob96]

The video was very helpful. I almost took the truck to a shop to let them install a starter I purchased. 97 Expedition, 4x4 with a 4.6. The truck has oversized tires so I was able to crawl under it easily. As soon as I broke the battery cable lug to the solenoid, I was committed! ;) Probably the last warm day in Michigan until next April. It took some effort but I got the two bolts loose. I couldn't find the top bolt. After using a mirror to see up there, I noticed the bolt was missing. I will probably pick one up the next time I am at a parts yard.

[@jasontorian5046]

This is the Hardest easy repair ever...........Easy to understand....hard to do

[@dannypalmer7701]

Nice work.I got all my training from him! Hes the best Ford Tech

[@juliansilverman4432]

Good Job! And thanks for taking the time to explain step by step how to deal with a tiny space lol! 😎

[@i94south34]

Great job on this truck.I wish i had it that easy when i Changed a starter on a pre-2003 Crown Vic it was a total pain.

[@FordTechMakuloco]

I94SOUTH Not sure if I have had to.

[@larryniidji]

You certainly do excellent videos. You do erk me in a way. I struggle to do the job and then you do it with an great camera view on top of that. Wow!

[@paullasseigne]

Just wondering why they don’t use a stud with a nut and lock washer for the top seems it would line up hold it in place while you start the other two bolts and I’m thinking that it would be easier to start a nut than trying to find a hole you can’t see

[@ronbaker8774]

1,333,071 views suggesting people searching for the professional's method of doing the job. And then some think they need to tell you how to do the job differently or better. Makes me laugh. Great camera work and description Brian. And thanks for all the other Ford videos as well.

[@4swzb]

Very well demonstrated including camera work!!!...thanks for the up load.....

[@FordTechMakuloco]

Thanks!

[@fomoco1454]

Using a stubby 1/4" & 3/8 ratchet helps a lot concerning the swing radius. Great video!

[@pkvillager]

Great video. Just had to replace the starter on my ‘08 f150 that had 180k on it. Died on my wife this Friday in the pickup line at my kid’s school. Took me an hour and a half in 25 degree weather. I only used my 1/4 drive wrenches. My 3/8 extensions and wrench heads were too big. My 3rd dead of winter parking lot swap. Hopefully my last.

[@NateJacobMoore]

I know this is an old vid but i referred to it prior to my swap. Great job btw, very helpful. Removing wasnt as bad as anticipated and was able to do it without removing the wheel like some other guys did. All about the right combo of extensions and a mini cheater pipe

[@donalddluckerii3147]

Very thorough video. Thank you.

[@christianwerner5450]

Your video was a REAL HELP! Difficult job but your tip on using 6" extension was great! I ended up using a couple of shorter extensions together with a 13mm deep socket for the top bolt...it gave me about a 1/4" extra on what the 6" extension with a standard 13mm socket had... gave me a little better clearance past the end of the starter. Thankfully the hidden bolts spun off easily once they were loose. Really helpful video - THANKS!!!

[@jowens1126]

Thank you for this one. I only have experience changing starters on 96 and older ford's. I was surprised to see they don't have a hood over the starter gear.

[@cbeausoleil]

Thank you! Most annoying yet satisfying DIY I ever experienced! For the 3rd bolt. I extended my ratchet about 14” or so toward the front past the mounts to get it off and back on.

[@SoundcraveMagazine1]

Great camera work! Good job!

[@suzannekelley9799]

Thank you for the video! I've convinced my husband to let me try my hand at changing the starter on his F150. (The fact that it's Sunday probably has a lot to do with it lol). Whatever! Wish me luck guys 🙂

[@matthewmoore8125]

Man you made that top bolt look easy! It took me a couple hours due to fighting withy the top bolt. Mine is a 2014 model v8 5.0. Thank you for the video tho

[@tonylopez8766]

Great video didn't realize how simple this is.

[@mattbartolovich8228]

You think?

[@TheTexan3333]

There isn’t a better video out period. 💪🏽

[@brianl1586]

Excellent video, thank you for the help. Top bolt was not that bad. Thank goodness you can at least feel it (if you cant see it). Be careful not to get your hands stuck, if you do don't panic and hurt yourself!

[@ridgid859]

Oh man I just got my hand stuck and did start to panic a bit. I used my other hand to tuck my fingers and got them out. Took a break after that..

[@yourmomsgames228]

followed to a tee. worked out well. thank you. i got a little lucky, previous owner must have changed starters before, because the 3rd bolt was not there. they may have had a hard time getting it out and decided not to replace it but i will be throwing it in asap.... maybe :)

[@dajuanjones8159]

Thank you this was a great video you didn't skip any steps really helped mo

[@MrRexquando]

Shocked at how close the the exhaust and no heat shield. I never liked putting the starter at the bottom where it gets all kinds of road contact however that was before I had to replaced the starter in the wife's QX56. Nissan put the starer in the gallery under the manifold. Nice and clean if it hadn't developed dead spots. Had to removed the whole fuel system and manifold. No easy rides I guess. Great video!

[@miamimike1287]

Same with Cadillac Northstar 32 valve Holy Ship what a pain in the butt

[@MrJfred78]

Great video! Thanks for posting!

[@jitterspec]

Thanks for video. I found that a craftsman stubby flex 3/8" driver mated to the extensions was invaluable for top and side bolt. I was able to get decent rotation with little room. I still used a harbor freight flex full size driver to break bolts loose and set final torque. Finally some wire wheel the bolts and antisieze be for installing again.

[@stevebishop1961]

Thank you for your video. It saved me and made the job so much easier. I appreciate how you let us know exactly what ratchet extensions are best and how to reach the bolts. I was able to replace the starter myself. I am a handy person, with home repair, but not a mechanic. I was able to replace the starter on why f-150 with not too much difficulty. Using the 3/8 inch to break the bolts loose and then using the 1/4 inch to finish the job was a great suggestion. Thank you or the simple and realistic video. I have not subscribed to your page for future repairs!!

[@tomc8157]

I have to do one of these this weekend. Looks like a piece of cake. I've done much harder starters before, this one you can actually see.

[@albanygoater725]

Thanks man! This was a huge help

[@DeandeStCroix-lp8zg]

Thanks man for sorting me out.

[@TheSavageGarage]

I like the look of that 1/4 snap on flex head you've got there! i want one :)

[@shogunMR]

Thanks for this you helped me with my 2010 f150. That top bolt is rough took a good 40 minutes to remove with hardly any room to turn the wrench, the rest wasn't so bad took another 40 min for the rest. Thanks

[@jeorginadaniels9259]

Hello, how did you get that top one out?

[@shogunMR]

@@jeorginadaniels9259 just feel around for the bolt and then put a small wrench in there and go super slow if it's too tight get extensions and get a swivel in between the extension once you feel around for the boat it's pretty easy to get out there's just not a lot of room to turn the wrench till you just have to be patient and just turn only two clicks at a time with your wrench

[@JoeShopper]

It's nice that your truck is so high off the ground! Great access. Thanks for taking the time to make the video. It's VERY helpful!

[@randyeddington4405]

Thanks friend I'm having problems out of the top bolt on mine 2009, helped alote!!

[@keepontruckin5862]

Great video brotha keep the good work.

[@paintnationusa8840]

Thanks a lot for the video, it was a big help! We’ll done!

[@jerrysineath9886]

good video. what kind of muffler do you have on your truck? It sounds good. i just got a 1990 F150 with a inline 6. I love it.

[@rachelspencer701]

Thank you for this! It helped me replace my starter!!

[@hecreg151]

THANK YOU FROM THE BOTTOM OF MY HEART. I REPLACED IT ON MY OWN.That one bolt was a pain i basically did it with out even being able to see it. 👍👍

[@truthislove911]

Thank you. Very helpful video.

[@ryangreer7655]

Video still helping people in 2022. Someone else helped me by not installing the 3rd bolt... Never would have found out where to feel and find out l was even missing a bolt.

[@jeremycompton1677]

Hoping this helps me. Gotta tackle this bear of a job today. I looked at it... it made me sad. I've got large hands which isn't going to help. Hopefully I can get the starter out. Thanks for the informative video.

[@alexalexander1908]

thank you my friend Made it a simple job

[@gary00832]

Well You sir, must have hands the size of a miniture boy

[@rodrigogarcia5901]

thanks bro, never changed one this small.

[@T-warf52]

Thanks, the video helped me.

[@oldl6655]

Thank you for the video my starter just went out 1990 Ford F-150 XLT

[@debjones3353]

Are there shims. Had a starter put in 2months ago. I went to start this morn. 3x it wanted to turn over. 4th time heavy grind noise. Way more than before. Would this be a bad starter or flywheel? (96 f150 auto) any thoughts before I hear from garage, as I'm wigged by what they may tell me, and the $$$ Thanks

[@stevencsawyerss]

I have a 96 Ford F-150 with a 5.0v8, I replaced the factory starter with a rebuilt duralast starter. The truck starts ok, but sounds a little rough, the original starter was not shimed. Also the battery light is on, but it shows the right charging voltage when the truck is running. Any ideas of what might be the problem? Any feedback would be great.

[@bradjunes3080]

Nice job, your hired. I need the same job, but the back bolt is giving my brother a problem. I'll show him how to do it with this. Much thanks.

[@carlsaxboy5916]

Thanks Dude, awesome!