Ford Fusion 3.0L DOHC Spark Plug Replacement

You can grab the updated Motorcraft plugs Here-
www.amazon.com/gp/product/B006...
Here is the Brake Dielectric Grease I use-
www.amazon.com/gp/product/B000...
This is the only anti seize I recommend-
www.amazon.com/gp/product/B000...
In this video I show you how to change the spark plugs on the Ford Fusion 3.0L DOHC, simple enough but a few tips.
Spark Plug Gap- .054"
Spark Plug Torque- 132in lbs
In order to get the rear bank you need to remove the upper intake see my video on that HERE-
• Ford Fusion 3.0L DOHC ...

[@coriecolston75]

You are by far the best on you tube. You make it so simple and it's a shame dealerships are charging outrageous prices for mechanical work. Good vids on the fusion...

[@2510lipp]

AWESOME video !!!!!!!!!! When I got up this morning I didn't think I could do this. But I watched this video... (a couple of times) And then I knocked this out like a pro !!!! Thank you so very much for this video !!!!!!!!!!!! Also liked the music in the back ground

[@KStatus7]

why didn't you show the back 3 plug change?

[@chaserzr1251]

Because the video for that is in the description jack 👌🏼

[@km9915]

Love the Toby Mac music in the background! Thanks for vid! God bless you

[@TheFutureLooksGrimm]

Big thanks bud, you do a nice clean job just like I like it.

[@michaelmaasen872]

Nice music in the background, love that TobyMac... Oh, and thanks for the video 😉

[@seanwalker4361]

Looks like a quick and easy thing ,thanks, also liked the music in the back ground

[@JesusChrist-xk9ee]

Sean walker z88.3

[@shaggysmurf4422]

Awesome video. Helped alot, specially with intake removal video. So let's say the boot connector broke off (too brittle nothing I could do), how can I secure it so it doesn't come off?

[@hearsedriver302]

i have a 2012 fusion sel with a 3.0. what brand and model plugs do u recommend?

[@piep6851]

How many coils are there when doing spark plug replacement on the 2008 Ford Fusion? I'd like to change the coils.

[@lforlucas]

Hey, thanks for the video. My fiancee has an 07 Fusion, V6 SEL. Do I have to take just that cover off, or do I have to leave the whole intake manifold to the side while I work on the spark plugs? Just trying to do this the easiest way, but I obviously want to be safe/smart about it.

[@brucegeter-richards9342]

I have a 2006 V4 Mercury Milan, would this be the same process for me?

[@franklinmorales78]

After change the plugs, is necessary reset ecu parameters?

[@jimstools3937]

If you need to change the boot for the new spark plug , how do you take the boot off? Is this the same engine as the 2006 mercury Milan ?

[@gr8108]

Hi. Can I use Bosch Iridium Spark Plugs for my Fusion 2010 3.0L V6?

[@feliperezende3568]

116/5000 I have a Ford Fusion v6 2010 and am having a Misfire problem on cylinder 6 p0306. What would be cylinder 6?

[@ericf914]

awesome video... thank you!

[@chefhopkins2907]

where is the location of the Engine Cylinder head temp sensor at on the 3.0?

[@TheWagonDude]

you the man!

[@winracso]

maybe out of topic but...is this model(v6 3.0) worth the money? i mean, are they reliable? smooth or stiff ride? plush seats? ill appreciate any suggestions. im looking for something reliable and good for my sore back. so im considering a 06 3.0lt. mint condition with 60,000miles for $3800. thanks.

[@garroshsucks12_]

winracso yeah seats are spongy and material is cloth. Its a smooth ride even with bad suspension.

[@Alice22551]

How do you know how tight to make the plugs? I don’t want to make them to tight. Also how do you check/adjust the gap? Any help is appreciated, thanks.

[@RzVids]

Torque wrench

[@piep6851]

Do you recommend changing the coil if doing a spark plug replacement?

[@oreogonzalez8123]

Not really unless they're giving you problems just change sparkplugs

[@piep6851]

When I removed the first coil from under the intake manifold cover there was oil leaking from the coil. What should I do? What does that mean?

[@oreogonzalez8123]

Valve cover and sparkplug gasket

[@jayhemfindsyou]

Just need to know how to get the intake manifold off! lol. There's a hidden bolt somewhere...

[@veneciaevans3858]

I have 2006 Ford fusion and have had 4 different types of diagnoses ..1 in which I replaced and it hasn't stopped ​the main problem....what should I do

[@aydenwapasha3380]

Keep it going

[@geovannycartagena2708]

that's the bosch 12v compactor impact drill I have the 18 v

[@Familyguy1262]

How many hours of labor does ford charge? Total cost

[@coriecolston75]

what plugs and gap would u recommend for a 2005 Ford Focus ZX4 ?

[@FordTechMakuloco]

These are the plugs you want to use- amzn.to/2hUytx8

[@FordTechMakuloco]

Gap them at .051"

[@GODs_Son777]

+FordTechMakuloco Gap?

[@martinhernandez1691]

should i change the coils as well ?

[@FordTechMakuloco]

Only if they are causing the misfire.

[@martinhernandez1691]

FordTechMakuloco what about the wires are they a routine replacement or do you just changed them if their bad ?

[@m0dul8r]

You say spark plug gap is .054 - the Ford manual says .049 Max for 3.0l... why? Also, is it necessary to replace the intake manifold gaskets every time you remove the intake manifold?

[@FordTechMakuloco]

+m0dul8r what year fusion we talking here? The intake gaskets can be used for 30k before they must be replaced

[@m0dul8r]

2012 SEL 3.0l - I picked up a new set anyways - they came with uppers and lowers...

[@RickyPisano]

Bank 1 is a real pain in the ass without a garage. I miss mine, tell you that much.

[@jacobj656]

Do you know what the coil pack and cylinder arrangement is. I think I mixed up my plug wires.

[@classicgaming345]

You dumb bro😂

[@classicgaming345]

Do one at a time

[@andrewhall5264]

Leaves off taking off the intake and egr?

[@FordTechMakuloco]

yes

[@fredmartine674]

Showing how to change the plugs is easy, why don't you show the problem metal bracket location that causes delay in removing the plastic intake housing?

[@tippie2000]

How do you get to the other 3?

[@FordTechMakuloco]

tippie2000 Intake removal link is in the description.

[@lndintw]

+FordTechMakuloco please help so I took off the thing holding down the spark plug I had to pull a little hard to pop it off but does it have to pop back on cause I can't pop it back on ...... I can put it on and screw it down but I don't hear the pop sound and scared it my not be on fully ?

[@lgOptimusv]

what if the gap nor the torque is dead on

[@FordTechMakuloco]

Torque them till snug and you will be ok, the gap is more important. Depends on the plug manufacturer. Ford plugs come pretty close to gap spec so you may not even notice it.

[@seanwalker4361]

thanx for the video it was a big help espeically trying to figure out what screws to take out and how to take it all apart, thank you so very much.

[@LoadingProfileName]

I only wanted to see how to take the intake off and it's not even part of the video😂