At the end, old projector illuminate better than new one! :)))) Good job!
@Alin878 жыл бұрын
+Retrofitlab The one of the bottom have sharp edges, specific to aftermarket projector, unlike the factory one that have edges more curly like the above one! I had some aftermarket projectors(morimoto), and now I have OEM headlights with bi-xenon, so I know the difference! I saw all your videos, you do a great job, but that was my opinion about this headlights! Thanks!
@csababako36708 жыл бұрын
Thanks for the great tutorial video!
@zsokyzoli8 жыл бұрын
Csak kár,hogy ilyen átalakítást nem lehet Magyarországon megtenni,mert bukta lesz a műszakin. De a vidi tényleg jó! ( very good video,thx! )
@cytoproct62503 жыл бұрын
excellent job
@Retrofitlab3 жыл бұрын
Thanks!
@retroheadlights53409 жыл бұрын
Can you do MK3 Ford Focus please? Getting ready to do mine.
@martynj-c49653 жыл бұрын
Which is the latest kit you do for the mk3 mondeo with xenon lights from factory? How much better are your kits than original oem xenon lights? Thanks
@Retrofitlab3 жыл бұрын
This is the newest version, with the new Optimus TR mini projector which can hold D2S bulbs. www.retrofitlab.com/en/ford-mondeo-mk3-2000-2007-bi-xenon-mh1-xenon-headlights.html And yes, definitely better than new OEM lights. 1 because the projectors itself are better than new OEM ones (light pattern/hot-spot/output) 2 because they have a bi-xenon function.
@martynj-c49653 жыл бұрын
@@Retrofitlab have you uploaded the correct video showing installation of these please? Thanks
@Retrofitlab3 жыл бұрын
@@martynj-c4965 We don't have a new video, mounting is the same as with the projector used in this video kzbin.info/www/bejne/n6PPd2OYgqaritk , only the mounting of the bulb in the projector is different, but it is quite easy :-)
@user-lv6im2dc7t9 жыл бұрын
At time 4:20 you are use a sprayer to clean the reflectors lighting Please What is the name of this sprayer ? Thanks.
@user-dq5uf8jf6j9 жыл бұрын
thank you very much!!!
@sosmarci4 жыл бұрын
Hello! Has this video become somewhat obsolete? The kit that now can be purchased for mk3 Mondeo contains a metal plate with holes. What is to be done differently?
@Retrofitlab4 жыл бұрын
Yes, kinda, when you want to use a large 3"D2S projector, this video is a nice guide. But the smaller 2,5" projector with bracket it way easier to mount, because you don't have to enlarge the hole in the front cover etc.
@sosmarci4 жыл бұрын
@@Retrofitlab Thanks for the quick reply. Do you happen to have a video on that? Also I have noticed that there are some install videos where the inlay is not painted? How crucial is to the inlay is to be black (or some other dark color)? And finally, on a scale from 1 to 10, according to EU/Dutch laws, how legal is to modify the headlights? :)
@Retrofitlab4 жыл бұрын
@@sosmarci Yes :-) kzbin.info/www/bejne/n6PPd2OYgqaritk. Normally it is not needed, but can help in preventing glare from the projector to the sides. Usually it is only done for looks. The kit does not have an e-mark so based on the rules / legislation it is not completely legal.
@sosmarci4 жыл бұрын
Retrofitlab.com Huge thanks for the honest answer.
@Retrofitlab4 жыл бұрын
@@sosmarci You're welcome, please let us know when you have any more questions :-)
@m.sz.90699 жыл бұрын
Could you tell me which level of temperature you used to heat headlight in box?
@vijaCZEk17 жыл бұрын
Hi, one question. Did you close the plastic back cover of the headlamp? It looks like Mini D2S projector is bigger than original one and you cannot close it with this projector.
@MrrQuake7 жыл бұрын
i did it the same work and it didnt close. Please tell me there is some difrent betweend pre facelift and facelift?
@Alin877 жыл бұрын
Hello! Can you tell me, what distance it is between projectors hole?(the aftermarket one) The horizontal ones and the vertical ones! Thanks!
@Alin877 жыл бұрын
No, you didn't understand me! Not the headlight hole, but the projector hole! I saw you have the projector for sale on your site!This one : www.retrofitlab.com/nl/xenon-projector-kit/bi-xenon-mini-d2s-30-twin-kit-1.html
@megashtyr19 жыл бұрын
Isn't it better to create and use a mounting bracket for that heavy projector? The screws are too small, and this glue method looks very unreliable. You could have drilled the projector to utilize existing reflector bores - that would result in much more reliable mount. Does the cutoff line wiggle on uneven roads due to this projector' excessive weight for the reflector?
@knulleriboy7 жыл бұрын
Retrofitlab do you have a link for the kit that doesn't require and modification?
@feedbrain62576 жыл бұрын
Hi, Please, what type of glue/Silicone can be use to stick it back again ?
@Retrofitlab6 жыл бұрын
We use Butyl. Please see this link: www.retrofitlab.com/en/butyl-rubber-sealant.html
@feedbrain62576 жыл бұрын
Thx you very much.
@thedrivingdew4 жыл бұрын
Where I can get the black Cover?
@Retrofitlab4 жыл бұрын
Sorry not sure what you mean :)
@thedrivingdew4 жыл бұрын
@@Retrofitlab can i buy the black thing?
@Retrofitlab4 жыл бұрын
@@thedrivingdew what black thing? :)
@thedrivingdew4 жыл бұрын
@@Retrofitlab the background of the light
@Retrofitlab4 жыл бұрын
@@thedrivingdew They can't be bought separate as far as we know
@darioattanasio56133 жыл бұрын
Dove si può comprare solo il vetro anteriore?
@Retrofitlab2 жыл бұрын
Scusa, non lo so..
@robertmorris88128 жыл бұрын
Hi, what size projectors were these
@robertmorris88128 жыл бұрын
+Retrofitlab where did you get these from?
@fastfix17938 жыл бұрын
I use box method and it caught fire in the end the whole headlight is gone.