Ford Performance Cobra R M-2300-X Front Brake Kit | 94-04 Review & Install

[@ilovebeardsilovebeards8309]

Definitely worth every penny. I absolutely love this brake kit and was such and easy install. Huge improvement from the old cobra brakes.

[@latemodelrestoration]

We love to hear that! 🙌

[@RepairGeek]

Or get the same performance for 1/3 the cost with an ATS Brembo setup.

[@Levi-Hawkins]

This!

[@aceburgers8801]

ATS?

[@johnkilo3]

@@aceburgers8801 Cadillac

[@Levi-Hawkins]

@@whpony96 yes they can. Do some more research

[@VacFink]

​@@whpony96 ss_engineeringllc's sells an eccentric that solves that problem.

[@metalroots8811]

The 94-95 sn95s are some of the best looking cars when done right

[@petrolhead8851]

94-98’s are my favorite mustangs!!! I have a 96 cobra myself, and my younger brother has a 95 gt with a trick flow top end kit and vortech blower that you can see in a few videos on my channel

[@camerond8176]

Unless your tracking the car regularly, the regular cobra brake upgrade is more than adequate of aggressive street and mild track use. That being said, the wheel candy these caliper add is almost worth it at it is.

[@The01Cav]

This is on the list of things to do on my 02 GT.

[@JesseAndMike]

Awesome brake kit!

[@DAllman1]

Glad this is back, it was nla for a while I thought. Good video, thanks lmr!

[@chrisvela5462]

Absolutely need AND want this kit! Any chance of seeing it in red?

[@69BigLou]

Yeah for real definitely on my bucket list for my 01 Bullitt. If not offered I'll have to paint them red to keep the Bullitt look

[@svtmatt6189]

Terminator is a Dream car aside of a Shelby. But for now I’m loving my 97 cobra. I got the FTR gt500 front Brembo kit for it. These brakes would be nice too

[@user-pf6wl4hv5j]

Ftr? Full tilt boogie?

[@bradbradley353]

Have eyed this for years. But my Mach’s stock set up with good pads and braided lines (bought J&M SS lines from you a few years ago) is fairly stout. Not sure I would see that much more braking performance with these…Still…they are great looking and maybe I’ll upgrade when my stock calipers finally need replacing…great video

[@bossmenerd]

2003 Mach 1 is the the sweetest with the shaker hood

[@chucktingle6426]

I like using lmr, but I spent a little over 500 for basically the exact same thing using Cadillac brembos

[@latemodelrestoration]

We're glad you're a customer of LMR! We realize there are countless ways to modify our cars. It's a good thing there is diversity in the hot rodding world and we all like what we like. At the end of the day, spend your money how you want and keep on rockin'! -Landan

[@redwalsh87]

This would be sweet on the front of my Mach 1

[@89Interceptor]

my favorite sn95 mustang has to be the 94 Boss 10.0l concept car owned by Jack Roush but im not sure he would sell it to me

[@bobeech9728]

Hey LMR This kit looks sweet. When I upgrade my front brakes I'm looking to go Wilwood 14". Do you have a video on that kit?

[@AFSil80]

Just purchased this setup through y'all for my '93 LX and was wondering about the dust shields. My car is currently running standard SN95 99-01 GT brakes up front, and the dust shields seemed like they weren't quite the right size but if they'll work then I suppose that will save me the hassle of trying to figure out another solution.

[@latemodelrestoration]

They'll work. The 2000 Rs had a unique dust shield in that Ford integrated a brake cooling duct. I've ran standard Mustang dust shields on several cars with the M-2300-X setup. I'll leave a link below to new brake dust shields if you want to check them out. -Landan lmr.com/item/LRS-2004CK/1994-04-Mustang-Front-Brake-Rotor-Dust-Shield-Kit

[@AFSil80]

@latemodelrestoration much appreciated. I gathered the same info, it was a kevlar piece if I'm not mistaken. Either way, good to know my current parts will work. Thank you for confirming!

[@904Saleen]

What if your inside bleeder is broken off? Will only doing the outside still work if I just take more time

[@jeremypickle682]

So maybe a crazy question but with the 5 lug conversion on a fox body could you use this kit?

[@jth1987leb]

This is a great kit. And Landon, you’re looking handsome as usual

[@latemodelrestoration]

Thank you for the kind words!

[@matthew6174]

Anyone know what kinda cap he used on that hardline? I’m trying to remove everything I can in this area for some rust restoration work

[@latemodelrestoration]

Any regular old vacuum cap will work. You can buy an assortment from most auto parts stores. -Landan

[@noneyabiz8225]

Anyone sell the 161 M-2300K kit anymore?

[@sergiomurillo9930]

Does brembo make rear brake calipers for this?

[@TheNightmare692009]

The stock 17in wheels just like the ones originally on the comp GT won’t clear the this kit?

[@camerond8176]

Funny though, I used to use 17" mustang GT wheels for winter wheels on my factory Brembo equipped Genesis coupe.I only had 3mm clearance, but they do work.

[@Fox.Mustang90gt]

What rear brakes did you use on keeping Comp?

[@latemodelrestoration]

The rear is the M-2300-M kit from Ford Performance. -Jay lmr.com/item/M2300M/94-04-Mustang-Ford-Racing-Rear-Brake-Caliper-Bracket-Kit

[@brandongoberdhan6335]

Can this work on a 94 v6 model?

[@latemodelrestoration]

Ford Performance lists this kit for 94-04 GT/Cobra models. I would recommend reaching out to their tech line for more information.

[@zachsmall6649]

These would look great on my 98 gt

[@musclevstuners5685]

Will the sve nvx clear this ???

[@latemodelrestoration]

Hey there, The NVX will not clear this kit. The NVX will not clear other BBK's like StopTech, Baer and Wilwood.

[@Matt211881]

Will this work with a 88 5 lug swap?

[@latemodelrestoration]

Please reach out to our customer service team and we will be able to help you answer your questions! lmr.com/contact

[@DeltaforceGaming01]

Can they fit an 04 v6?

[@5150GSD]

The V6 and the GT use the same brake caliper and rotors. So yes, the kit would work on a V6. 99-04 all the same.

[@x04svtx]

Is it bolt on for 04 cobra

[@latemodelrestoration]

Yes, it will fit 03-04 Cobra's!

[@davedave2882]

@@latemodelrestoration I need a rebuild kit for these calipers do you offer that? If not any idea who does I can't find it anywhere.

[@latemodelrestoration]

@@davedave2882 Unfortunanlty, we do not offer a rebuild kit for the calipers. You may need to reach out Brembo directly and ask if they offer a kit.

[@jamesardis5086]

Nock a grand off and make them in red and you got a deal

[@daveknasinski1792]

Insanely expensive!🙄