Forging A Knife From Gears - Trench Knife

[@JakesCustomKnives]

Forging A Katana From A Coil Spring kzbin.info/www/bejne/aoO8iKWkZa93hLs

[@runnikcatti5997]

I have a mine claim out in Hachita, NM and in one area of the deposit, it assayed out to almost 600 lbs iron/ton. You should forge a blade from virgin iron ore. I can send you all you need.

[@adghqrtuu929]

老趙一豪

[@adghqrtuu929]

Jake's Custom Knives i5

[@adghqrtuu929]

Cedar Woods assisted living

[@Thunder_317]

It's amazing. I can accept it as a gift. Thank you beforehand.

[@JakesCustomKnives]

WOW Over 400k Views in 25 days. Thank You!!! If you liked this knife than you would love my new Belt Buckle Knife, Check it out kzbin.info/www/bejne/ipebiINreN52r6c

[@RolandtheThompsonGunner]

Very cool knife, I would love to have one like that. So I think I too will attempt to make one.

[@asss5705]

Jake's Custom Knives ss

[@portfeed]

Jake's Custom Knives Congratulation mate. Can you make replica downunderknives? I mean Bowie knife. I think you good do this.

[@digambersingh7846]

Nice

[@ดินประยุค]

Jake's Custom Knive

[@jakemensing6672]

Me: I can't hear what he's saying, better turn it up. Him: "Let's get the forge fired back up." Forge: KHHHHHHHHHHHH!!!!!!!!!!!!!! Me: Ok well fuck my ears then.

[@catscradleforge2891]

Wow, you do wonders with these pipe wrench gears blades. Very nice! I have had trouble with gears falling apart when I try to forge them. I was trying to drift a square hole in a gear to use it for a guard. I was using gears out of the rear gear box from a old rider mower. Some gears forge great but, others just break the minute I hit it with a hammer. You have incredible heat control skills Sir. Bravo!

[@evanro2396]

Looks awesome! I like how you incorporated the gear teeth into the knife as well. Just awesome.

[@MrStampfer]

Really awesome 😮 this idea to forge a knife from this part of gears. It looks great :) and the natual look is still visible.

[@SamChaneyProductions]

This is one of the coolest knives I've seen

[@ads01329]

Even with the little shake in the guard it is a beautiful piece great job.

[@RustyPearson]

Love what you've done to finish this one. One of a kind!

[@filipesilveira5360]

Beautiful. Nice work

[@HDHD-yv9np]

Best knife i have ever seen made. Wow

[@kfossa344]

someone someone check out Alec Steele. Very young man at the top of his craft.

[@HDHD-yv9np]

Kirk Foster wow. Thanks a lot for opening my eyes haha

[@thomasryan8218]

You are a unbelievable craftsman. That is beautiful.

[@peebee143]

Got all the elements I like to see in an item. Re-use of an old item, good, strong material with a lot of craft evident in the finished product. Sort of thing I would love to pick up off an auction site or from a village fair.

[@EclipsePhotographyFL]

I absolutely LOVE the creativity of this piece. Very cool concept and execution, Jake.

[@danielnormington2066]

Hey, at 14 min, you finished the handles, great job by the way. May I recommend that you repeat that process for the handles and form them to be 1911 grips. I bet they would be worth a pretty penny.

[@jw8901]

good idea

[@JoshuaC0rbit]

Really nice work man. I just started making blades about 6 months ago using the stock reduction method but I want to learn to forge eventually.

[@misuhawkwing2121]

Dude I love ur videos its cool how he can turn anything into a nife,sword,spear,machete

[@murphfee617]

Dude, Well done That came out awesome. Great work man

[@marleymillz1705]

if a zombie apocalypse breakout , I'm definitely on Jake's team 👈🇺🇸🤘

[@p1stolp.521]

that's bad ass brother. thank's for showing it to us. cheers from mexico...

[@theantichrist6524]

That WAS a good build

[@qcrews9410]

That is one of the baddest knives I've ever seen! Awesome work!

[@andrewmcallister4151]

Dude, I seriously want that knife.

[@lanceladewig2793]

Cool design,great use of material

[@temujinhan9850]

You are out of your mind???....you are great!!!

[@soglaten]

Wow that was impressive and I watch a lot of these tubes well done.

[@khaledalyahya1510]

What do you mean by saying u made a gap.. Dude u are amazing there is no gap at all.. U actually made an Art from nothing.. u are amazing

[@jasonizuki3671]

Khaled Alyahya he said he made a gap he probably re-did it but yes its pretty awesome

[@_AVF]

That belt snap scared the crap out of me. Awesome vid and sweet blade!

[@tritonalabaster6269]

A weapon to surpass metal gears ...I'll show myself out

[@montes007black6]

OMFG!!!! GREAT WORK !!! I neeeed IT !!

[@shahzad4455]

Please please please, I want this one. this is so kool and beautiful :-) Really respect your skill. Love and regards from Pakistan

[@samirbasic5812]

Excelent job Jake. Best regards from Bosnia and Herzegovina.

[@macmakar399]

Why don't you try forged in fire competition I'm sure you will do great...

[@jamesfrye9663]

Beautiful work man that knife is gorgeous!!

[@inky9132]

What steel is this? I can not imagin that it is suitible for knifemaking. Gears are usually made from a non hardenable steel, which get carburized at the gear teeth before hardening. I can't imagine that this blade got really hard. I also wouldn't test hardness with a soft stroke of a file. Try to scrape glass with the tip. If it's able to do that it must have at least 58 HRC.

[@lillinkcard2371]

Helmuth Pape I mean it's a show knife fr why criticize it ?

[@warpighammer3760]

Helmuth Pape around 13:28 those sparks looked chalked full of carbon to me . What do I know just saying.

[@AlexiVolkov]

If they are differential gears, they're likely made from high tensile steel like 4140. They'd need to take a lot of stress.

[@Hubert_Cumberdale_]

That thing is freaking dope!

[@maraichux]

This sure are Gears Of War!

[@jimbrady1372]

That is one of the coolest trench knives i have ever seen .

[@ieatdrywall3824]

This guy can make a knife outta anything he probably could make one from a TV

[@annawing770]

There's probably not enough metal in a TV to make a knife.

[@Biggest_Superhuman]

Anna Wing Glas and Plastic knife

[@liamhunter071]

Absolutely Awesome! Gives me a drive to get back at my forge and the anvil! Thanks for your video

[@DESERTTACTICAL1776]

2:28 ah I see you are using the rare throw it on the ground technique!

[@badlandskid]

Jeremy Essary much more subtle than the “jamb the point in the dirt” technique favored by hollywood

[@img-michaelmartin9013]

ok. i dont do forge but i reallu love your channel and make me smile. beautiful works. keep it up.

[@Rowlett54]

Nice design

[@badgersnax9764]

Damn, it's a beautiful, dangerous work of art. ... AMAZING!

[@ramboperez4971]

I'd low-key buy that knife in heart beat. Sell it on eBay😂

[@tutteviro]

You are an artist man, very good job.

[@levirichardson54]

You should try out for forged in fire

[@cobrakillingfrog646]

Stunning. Absolutely fantastic work!

[@vinylexperience77]

why not make a ladder pattern?

[@MichaelDespairs]

Really creative, leaving some of the teeth at the top of the blade and then fabricating a handle and guard was genius.

[@midnighthowl4614]

those dislikes are probably just jealous blacksmiths

[@ianstradian]

Outstanding knife! The Gearheads trench knife.

[@SuperAWaC]

may as well not even have bothered to make the blade from a gear, lol.

[@bradyvian5504]

These are always the best blades I have ever seen

[@MrMikado282]

Fast-forward grinder = RIP headphone user

[@MrBioniclefan1]

MrMikado282 lol so true

[@joaquinamenabar9374]

you are a hell of a smith , man .... congratulations !!

[@huligan2398]

Красивый нож👍👍👍

[@luisstanker1491]

Wow... wonderful stylish knife👏👏👏👍

[@TheMrMurtle]

hey man, i love watching you make the knife and it turned out really cool but, the bits where it's fast forwarded i find loud and unpleasant and i dip the volume manually then raise it when you start talking again, maybe dial the volume back on those parts? or put some music over it?

[@triune_blades]

Just plain gorgeous!

[@qu535]

Hello I want to buy one like this please tell me how to order

[@boombandit8440]

Same

[@michaeladams2911]

What a beautiful piece great job

[@elpsycongroo15]

that knife is so damn cool

[@dustinkrejci6142]

Please make more gear knifes! I like the look of them!

[@affankhalid3038]

I like Chanel.. From INDONESIA..

[@pombo3000gaming]

One of the nicest forging processes I’ve seen

[@ionicspark956]

Can you do a build that you could sell for around 80 dollars if its not to much to ask im on a budget and would love to buy one of these I just can't afford it

[@lisajohnson8566]

Beautiful to say the least and a great Video to see how it was done. Amazing!!

[@mikehp9524]

Amazing from Portugal

[@ЗахарСаянов]

Miguel Angel H. P. 1ншмиш.м

[@javierbeunza1257]

killed it man good job.

[@bibirbibir3946]

Please jake its possible to post a vid how to make a big shield like middle age covering Half body if you can!thanks my friend 🇩🇿

[@richkandle7578]

Bibir Bibir go to man at arm's on KZbin they make sheilds and armour

[@bibirbibir3946]

Rich Kandle hi thank you my friend

[@TheoryMaK15-255]

Hey Jack!! Excellent Job! Mate! Sound like your from Texas or Texes?😆 I lived there for a while the bbq was great 😃!! Love your smithing with the gear, very creative and exquisitely awesome 😎! Well, I sub to you and Like the video because your talent and humility. 😉 I'll look forward to your video in the future 😁! Godspeed and Merry Christmas 🎄🎁!!

[@kalinatorgaming8722]

Now turn the knife back into a gear

[@driveheronman4304]

I bet your happy you stuck with it now, turned out very nice good job lad👍

[@alexanderkelly3047]

You should of made a karambit out of the gear

[@richsargent7113]

That's one of my favorite knives iv seen made!! Thanks

[@francisdedumo3323]

Instead of cutting those teeth, you should fold it in half and apply some borax. And then fold it again and again and again. So that there should be no waste. Please try that on your next video and let see what happens.

[@lewfrederick6604]

t

[@solomonzekria3579]

Can't get better than this 👍👍👍

[@mwg.4204]

I want to buy it

[@hayderhussain9988]

Awesome, very good work and great effort , I wish I can own like this knife. 👍

[@AK-gu9qw]

شيء كبير يا عمرى شيء كبير

[@roussos87]

freehand legend

[@АндрейЕлизаров-у7ж]

Красиво, но очевидно Мастер про балансировку клинка ничего не слыхал. Баланс от такой рукоятки будет сильно смещен. Ручка очень тяжелая и рубящие удары таким клинком не нанести, рука отвалится, в общем красивая и бесполезная вещь.

[@Revenant483]

That is a sexy knife!!!! The only thing I would have done different is you don't need the finger notch after the hand guard on the blade. That being said I would love to own it anyway!

[@FranciscoSilva-hm6lj]

artista

[@goals818]

That was lot of hard work. Wow !! Well done😀😀😀😀😀

[@GeoffPesos]

Great video, but someone is trying to steal youwe content. Search, "Forging Knife from Gear" and the third video down is yours posted on someone else's account.

[@dpqgaming8992]

Zoinks jeez shaggy I seen that too

[@tylerdunning7363]

Pure skill and talent beautiful knife

[@josemiguelperezrosas4110]

Qué ARTE tan hermoso me gustaría aprender buen video

[@randalbloomquist7812]

Very nice! You do have a great talent! Thanks for sharing!

[@Cxste11xn]

God she's beautiful. Well done.

[@jrsharp2003]

Very cool. Good work Jake.

[@pvtmeepmeep]

Oh my God man you got to stop flirting things I have laying around the house otherwise I'm going to get very upset that i dont have a forge

[@coolwaterdvr]

Beautiful knife.

[@scarcedoom5251]

I guess you made the knife out of a "metal gear" tehe.

[@joesheetsAKAtokuta]

SCARCEDOOM clever

[@sayospecter6731]

A knife to surpass metal gear...

[@bytheburnside7539]

SCARCEDOOM solid joke

[@poppabloodvessel7072]

NOT THIS TIME JAKE!

[@melvinwilliams3307]

it’s legendary unbelievably awesome

[@ابوحجن-ر9ك]

لوعندي مثل ماعندك من هالالات والعده لااصيراطلق منك

[@adamk.u.t8556]

لا تكابر ..

[@بياعالورد-م3ض]

وانا مثلك كمان

[@watcheroffools366]

Beautiful knife! Really creative. I’m not a fan of the blade serrations but a personal preference. The volume level changes were brutal but again, thanks for sharing your incredible skills.

[@brandenparnell5280]

grinding everything off of it kinda defeats the purpose of proving that you can make a knife out of a gear, hell you might as well have just went and got a semi flat piece of steel

[@Red_Lanterns_Rage]

agreed, the reason you use odd materials is to create a pattern in the blade, the more interesting the source the more interesting the pattern will become, like fuse a clump of scissors together and forge that, you'll get a great pattern in the blade..... kzbin.info/www/bejne/pHeqqZ5olrp1fLM

[@andersonbicalhodesouza3588]

Sem nenhuma dúvida vc é um artista, está será vendida, logo, logo.Parabéns.