How to remove rust from metal: Step 1: get the metal 1200 degrees °C Step 2: beat it
@A_random_nerd5 ай бұрын
Gotta beat it like it's your meat on Dec 1st
@Tdjice5 ай бұрын
@@A_random_nerdyessir
@lostforwar56194 ай бұрын
well, if it works
@elcomealmas4 ай бұрын
The fire's in their eyes and their words are really clear So beat it, just beat it
@teammystictv54844 ай бұрын
Step 3: Just beat it 🎵
@L0gical-warri0rs0074 ай бұрын
Minato Namikaze wants this man as his weapon master.
@Levoi022 ай бұрын
Yeah😅
@jesusjuarez879529 күн бұрын
Ñ PP ppóq@@Levoi02
@rodney00045 ай бұрын
Its beautifully poetic turning something useless to an untrained eye into something special and giving it a second chance
@emiami4585 ай бұрын
Metal is never useless
@razerow33915 ай бұрын
@@emiami458well this is! There is a reason that even in western sword the steel is folded. People think it was only the Japanese but no all blades weapons were. This is ornamental so is the literal definition of useless.
@melissamccaig34914 ай бұрын
You make me one please for you
@nathon19424 ай бұрын
@@razerow3391Steel isn’t always folded and ornaments are for decoration, they’re not useless. Regardless, this is still an edged weapon that could be used as if it were intended to be used as a weapon.
@RAVANA74 ай бұрын
It’s called recycling, ever heard of it?
@brandonarreola71884 ай бұрын
Minato would be happy with that
@levi69554 ай бұрын
I also thought of Minato when I saw that😂
@sambaker44824 ай бұрын
The Yellow Flash
@darthvader20534 ай бұрын
"its called flying raijin jiku shippu senko rennodan zeroshiki "
@marcossouza10533 ай бұрын
Minato Namikaze
@rocket000063 ай бұрын
@@darthvader2053 it’s nothing really 🤷🏾♂️
@JmonsterNEO5 ай бұрын
Ahh, the humble kunai, a tool that is wonderful at digging holes. Wether it’s in the ground or a target’s skull, is up to you…
@Jesse-YT18074 ай бұрын
Whether*
@cheriekarley24794 ай бұрын
@@Jesse-YT1807 I cannot stand the spelling police 👮🏽♀️ 👮🏻♂️ is this really necessary?
@nathon19424 ай бұрын
@@cheriekarley2479 It is necessary, actually. Imagine if there were no standard, proper spellings and everyone just spelled it as they pronounced it. Good luck discerning between the different dialects and accents, much more peoples own interpretation of how letters sound together.
@badideagenerator23154 ай бұрын
@@nathon1942 there wasn't a standardised spelling system for the english language for most of its existence.
@nathon19424 ай бұрын
@@badideagenerator2315 Incorrect. English has always had grammatical rules; just because the general populous was not consistently educated enough to maintain that standard doesn’t mean it didn’t exist.
@thefancytiefling3 ай бұрын
I just want to appreciate the fact that he didn't just cut out a rough shape and sand it like some Neanderthal but he actually went through the full process of properly forging a kunai. Very few on KZbin do so so it's always nice to see
@user-xb5ur6hu9x13 күн бұрын
This guy has made all the weapons I can think of as a samurai.
@SBC-ReV4 ай бұрын
How do u resist the urge to not add a chain...
@NoName-pd8pu4 ай бұрын
Well if he made Scorpion's Kunai instead he might have done so
@mardigenesis18802 ай бұрын
It is Minato's Kunai, not Scorpion's Kunai.
@haystackbill618729 күн бұрын
@@mardigenesis1880And? Who says he can't add a chain to Minato's kunai?
@NoGoatsNoGlory.26 күн бұрын
@@haystackbill6187the fandom apparently
@krieger88258 күн бұрын
Throughout Heaven and Earth...
@AyushADarts08045 ай бұрын
Minato namikaze the yellow flash is searching you
@levi69553 ай бұрын
I also thought of the same lol 😂😂😂
@onkgopotsemolete698216 күн бұрын
Is that you, Minato sensei??
@joshuabullard8284 ай бұрын
I’m about to start my forging journey and I’m super excited. I got my anvil and hammers now need to work on the furnace or way to heat up the metals and metal itself lol
@levi69554 ай бұрын
Good luck brother 👍
@eri-xt8mh3 ай бұрын
good luck my man, hope your journey full of joy.
@erikreber369527 күн бұрын
They all make it look so easy. There is a lot to it. I hope it goes well for you sir!
@damascusraven20 күн бұрын
And then Minato chucks it at an opponent and misses.
@user-wp1yl4hn2j4 ай бұрын
One more thing, please upload lots of videos so that your hands don't run out
@jonharrison31144 ай бұрын
Using a bullet as a handle was pretty based ngl
@mike410623 ай бұрын
What bullets look like that? Lol. I'm far from an expert, but that really doesn't look like any kind of bullet or casing that I've ever seen..
@omicronlyrae62283 ай бұрын
That is not a bullet casing.
@jonharrison31143 ай бұрын
Mb I thought it looked like one
@user-vw1up1yn8y2 ай бұрын
обожаю круглые рукоятки, желаю до конца дней всем, кто показывает как их делает, использовать круглые рукоятки на всём инструменте
@johnnytower61693 ай бұрын
Bloody gorgeous work, I have very limited experience with metalworking and zero with forging but I have enough to know that you make it look easy cos you know what you’re doing
@user-ii5ww4bn5g15 күн бұрын
Que maravilla 🙌👌👍
@thelonelystankmuncher8879Ай бұрын
If you look into it, ninja weaponry are just mostly farming tools
@m.prabhurockstar785315 күн бұрын
Orewa namikaze minato 🎉❤❤
@My.fAkE.eYes.oPeNeD5 ай бұрын
Absolutely stunning as usual ❤😄
@SMOKEY-NAGATA3 ай бұрын
You are the best blacksmith I know in my life and in the world too. You are really talented. I hope you teach me your profession. I hope to be your student.💪💪💪💪
@PintuMahakulАй бұрын
👍 Amazing forging work. Thank you very much for sharing your wonderful video.
@jamesallred46013 күн бұрын
Minato!
@Shisui_uchiha_kotoamatsukami13 күн бұрын
Namikaze
@GreyhaundАй бұрын
Спасибо за фильм. Подписался. Я помню своё детство и посиделки моих родителей с друзьями на кухне. С обсуждением Брежнева😊
@jessemoreno899816 күн бұрын
The Raikage is looking for you!
@_the_left_aint_right_25 күн бұрын
I've heard people say they wouldn't want to live forever because it would be boring but look at all the cool stuff you could learn if you had enough time.
Greetings Iron Man I am Sir SpongeBob of Bikini Bottom
@MisterPuck2 ай бұрын
“Oh cool he’s making it stealthy by making it black.” _he puts a shiny brass handle on it_ “Oh. Never mind.”
@NADA-uz5vr13 күн бұрын
now makes a Mark 1 trench knife
@toolazyforname27975 ай бұрын
Hey can I just ask what you use to get a mirror finish on some of your pieces? I’m trying to get into blacksmithing and Im trying to get a mirror finish on something but I can’t quite get it right. What grits of sandpapers do you use if you don’t mind me asking?
@ermdon4 ай бұрын
Not sure if this is what he does but good ol Google said the following "It just takes a lot of effort. First do the repair and get it as smooth as possible then start sanding - coarse to fine - eventually to 1000, 2000, 4000 grit, then you go to polishing compounds like “Semi-Chrome” or some such metal polish. It will take a while, but you can get a mirror finish eventually."
@nikki53994 ай бұрын
If you want it mirror like you’ll need to use some, buffing, cutting, and polishing compounds.
@JaySchaid4 ай бұрын
There are a few things that must be done to get to a mirror finish or to near-mirror finish. There are multiple ways to say this but nearly all are synonymous: the final step abrasive must be very fine, also said as to have a high grit number, or the compound particulate must be very small Second trick is to work your way up the steps through the different grades towards your final finish and to not skip any of the grades to try and save time. By working through most of the grades by increasing the grit no more than doubling the e grit number with each grit may sound like it takes more time but actually saves it
@SuavecitoSlimАй бұрын
Damn, I was waiting for “GET OVER HERE”
@TheFireMaker1173 ай бұрын
I could only imagine having a old rusty soviet tank would only be a blacksmiths dream come true
@Abdalah115 ай бұрын
Damn this looks super clean and perfect nice job 👍
@zenway70274 ай бұрын
As a veggie knife, I don’t think it will fit in the kitchen drawer. My pumpkin’s & potatoes laugh nervously. (Translated from original gibberish)
@moai968526 күн бұрын
錆びたアーマーが刃物に生まれ変わるの、闇堕ち感あっていいな
@RETR0MAN29 күн бұрын
All you need is a flying raijin seal and your set!
@lancecorporalveteran062122 күн бұрын
I say that's probably more useful as a spearhead
@Anonym-yr4qnАй бұрын
Arguably the coolest (and hottest) way of recycling.
@murtazalimurtazaliev6275 ай бұрын
How about - "Hiraishin giriiiiii!!!!!"
@levi69554 ай бұрын
?
@murtazalimurtazaliev6274 ай бұрын
@@levi6955 ¿
@MikeyJBlakeJR24 күн бұрын
This dude could prpbably build his own private jet out of some grocery bags
@JimmyBeamerBear21 күн бұрын
Bro is straight dangerous
@user-wp1yl4hn2j4 ай бұрын
Selling Kunai can make you rich and make a lot of money
@Dookie69uk3 ай бұрын
Damn that's some impressive craftsmanship.
@antoniewest3 ай бұрын
At first I thought it was a kunai spear
@user-ph4ts9rh1q26 күн бұрын
За такой вот клинок, можно легко уйти лет так на пяток.
@juliobaladao8667Ай бұрын
Excelent work! Nice😊
@MyDadCanFixAnything5 ай бұрын
Beautiful. Well done.
@michaelchavis95373 ай бұрын
The bronze made it a lil tacky but the blade was a vibe
@user-gd7yx9mz4bАй бұрын
Yeah. You're still supposed to fold the steel.When you're forging it you don't cut it off
@Spider_Gowrk4 ай бұрын
Cuz u r so amazing and i liked your work i subscribed for u from the first video i saw
@Johnny.3 ай бұрын
Master! Nice work! ❤😊
@tyronekim3506Ай бұрын
Looks good, but I would have preferred a wide tang.
@Pranayarora20095 ай бұрын
Just looking wow❤❤
@SteinzVsKnives3 күн бұрын
That is awesome I'd love to test one of those
@muhammadshafeeque92642 ай бұрын
SubhanAllah ek musana chuk na jaye
@Steelpoly3dJ3164 ай бұрын
Shouldn't the handle be elliptical with a textured grip, so that it doesn't roll in your hand when you're trying to align the edge? Or is that not important for a kunai?
@johnnyalviso73502 ай бұрын
Daaang.ur drawing it free hand?impressive
@wickedishiccy76214 ай бұрын
Dang that looks like a lot of fun to learn to do
@catnip53154 ай бұрын
When you switched your playstyle from defensive to offensive
@moumitasardar70442 ай бұрын
this is the thing.... that my man actually have done with my heart
@andreykorenev2684Ай бұрын
В начале ролика в его складе металолома хорошо видна рейка с приклепаными режущими сегментами механизма косилки и ещё видна колосниковая решетка от печки, листы рессор, рожковый гаячный ключ - детали выглядят такими же какими их можно было увидеть ещё в СССР
@reinaldogarcia70Ай бұрын
Awesome 😊
@tanyusha_raznaya29 күн бұрын
Наши металл весь советский отправили зарубеж. А там из нашего металла делают офигенные вещи и нам в десятки раз дороже продают. Ведь сами мы не умеем ни фига!
@themasquerader101Ай бұрын
Joey Wheeler is upset that theres no chain
@josevaldecir80911 күн бұрын
Parabéns. Ficou MT top
@FaridMaulana-kd5zwАй бұрын
Bang coba bikin samurai terhebat sepanjang masa
@user-wi4th2nn1c9 күн бұрын
Nice made
@LincolnHenderson-yj3inАй бұрын
Hes the real life scorpion now 😮
@JoseRodriguez-di4lq4 ай бұрын
Keep the hard work moving forward
@jibrilogle95854 ай бұрын
Is there some sort of armory where he keeps all of the weapons? It'd be so cool to see all in one place
@bca-biciclindcuaxel75274 ай бұрын
That is very Power Ranger style :))
@charitiekbyrd13 ай бұрын
Very nice!!! I know that making something like that isn't easy. Haters are gonna hate, be proud of your work and keep doing you!!!💯😁
@happy10744 ай бұрын
Bro try forged in fire You will surely win it
@user-ky6sf7ph4q4 ай бұрын
Кунай Минато Желтая молния👍👍👍
@user-em2il6xe8iАй бұрын
Никогда не рисовал форму клинка, всё делал на глаз, на ощупь, получалось намного красивее, чем здесь.
@SirMevan2 ай бұрын
The Fourth Hokage would be proud
@SlowEvenBurn4 ай бұрын
It's got an elegant simplicity to it (also converts to a spear tip quite well I'd imagine)
@austinnapps72724 ай бұрын
I was thinking the same thing. I’m not too impressed with the design to be honest.
@SlowEvenBurn4 ай бұрын
@austinnapps7272 I prefer it as a spear... A thrown weapon is easier to throw when the weight is shifted more towards the front of the blade... but who's to say as I haven't seen it balanced or thrown.
@AKITA_Forever4 ай бұрын
こうして職人の手によって丁寧に作られたKUNAIが、我々忍者の元へ届けられているわけですね
@AKITA_Forever4 ай бұрын
いつもありがとう
@Shihabexplains4 ай бұрын
Nice , now you can use the flying rising jutsu
@crimson32744 ай бұрын
Ouch. I see why you used a glove. A sweaty hand would end up in a glide across that blade.
@rorschach7233 ай бұрын
Nice 👍 I need to start making more weapons and get my blacksmithing stats 📈
@kaynhuros20503 ай бұрын
Ehh i dont know about being a kunai, but as a spear tip, it's amazing
@user-vc8hy1lu4l6 күн бұрын
Yo, you are a badass for this💯💯💯💯💯
@billzusner48734 ай бұрын
We gotta leather wrap that bronze homie.
@DevinBird27533 ай бұрын
What a beautiful piece of art
@bag4045 ай бұрын
Scorpio
@yurapiligrimov15244 ай бұрын
1000% только SCORPIO+шнур для різних ударів,під різними кутами(наподобі фільму "Вбити деБІЛЛА 2)ТАМ МІЛФА ЯПОНОЧКА КРУГЛОЮ БУЛАВОЮ ТАКЕ ІСПОЛНЯЛА😮ЧУТЬ ГОЛОВНУ ГЕРОЇНЮ НЕ ГРОХНУЛА😂ОТ БУВ БИ ПОВОРОТ😂😂😂
@bag4044 ай бұрын
@@yurapiligrimov1524 😀👍
@151ncoke4 ай бұрын
Man i love the mirror polished edges.
@SodaPop30924 ай бұрын
Can you do the sword in the stone From the Disney movie Sword In The Stone
@loganfields1593 ай бұрын
You had me up to the round handle.
@Ethandomino5 ай бұрын
Make more long form videos!
@ChadKakashi29 күн бұрын
You forgot to add the jutsu formula to the handle
@urban_explorer67483 ай бұрын
A boar spear would have been awesome
@yankkobayashi9058Ай бұрын
А зачем кровать можно же было сразу вырезать форму? 😅
@garyfreida65043 ай бұрын
Now that is a super sweet blade.
@vincentpelletier12464 ай бұрын
Ooh armor as in "old janky fuckin piece of scrap"
@Dxwn_54 ай бұрын
If bro was in the apocalypse he is set
@siyahbeyaz79684 ай бұрын
Nice farmer tool
@blacksnapper76844 ай бұрын
Lil big for a functional Kunai but they really weren’t meant to be thrown but instead was more of a survival knife