Хороший нож с приятной геометрией, хотя по мне так немного толстоват. Классная работа, мастеру респект и уважуха!
@colors_and_tastes4 ай бұрын
*_WIE IMMER, EIN WAHRES KUNSTWERK!_* _Einzigartig, ergonomisch und sehr schön!_ _Danke für das tolle Video!_ _BIG LIKE!_
@diytoptricks3 ай бұрын
This video is a masterpiece! The transformation from a simple file to a beautifully crafted knife is mesmerizing. Your attention to detail and patience throughout the process are truly commendable. The way you explain each step makes it accessible even for beginners. Thank you for sharing your passion and knowledge. It's inspiring to see such dedication to the craft. I can't wait to try some of these techniques myself!
@geraldstamour13124 ай бұрын
Dope AF results, @Koss-channel! This should be sold in a high-end kitchenware/sporting goods catalog/retailer!
@SoFreshSoClean20243 ай бұрын
#1 Looks Awesome 👍🏼😎 #2 Add a Magnetic 🧲 Shealth, w/ a Japanese Ocean design on the Wood Shealth. #3 Polish the Blade up to 50,000 Grit and then Mirror polish compound w/ wool. #4 Use White Ceramic Blade Sharpener to make it Surgically sharp. Respect
@bigdadgigachad30424 ай бұрын
Love how you did the hardware, with the female barrel's in the center. So clean. Came out Perfecto
@AK-wt7jj3 ай бұрын
👍 from India
@nirodha70284 ай бұрын
Love your craftsmanship… Seeing you drill through the metal without clamping it down and holding it in your hands makes me feel the injury I once caused myself when a piece caught the drill and started spinning on me. Be safe sir!
@steelshepherd68434 ай бұрын
Honestly one of favorites. I like the spot left for the thumb.
@rubenmendoza567124 күн бұрын
Dónde los acen k dónde los venden porfavor quieto un Aitor
@Runningcheetah14 ай бұрын
The marking tool at approximately the 3 min mark is really cool. Did you make that or can you provide more info about it?
@Koss-channel4 ай бұрын
Here (www.amazon.com/0-200mm-Marking-Vernier-Caliper-Parallel/dp/B07VVPM96F), you can buy this tool for example on Amazon.
@Runningcheetah14 ай бұрын
@@Koss-channel thank you!
@haroshea4 ай бұрын
Nice job, perfect style 👍. The whole process seems so easy and simple, but only thanks to your skills and experience.
@O-SV4 ай бұрын
Another masterpiece! Nice knife and great work by the master! Well done!
@Koss-channel4 ай бұрын
thank you)
@HenningJohansen4 ай бұрын
Your creativity and design sense never cease to amaze me!
@upshift26904 ай бұрын
My favorite color combination, great job looks amazing!!!!!
@andrewparham51454 ай бұрын
That’s a really cool knife holy I don’t think I’ve ever seen one very unique shape
@MCsCreations4 ай бұрын
Stunning knife, man! Really amazing work! 😃 I really liked the idea of the screws!!! Stay safe there with your family! 🖖😊
@BrentMettert4 ай бұрын
Another Beautiful knife Mr. Koss, thanks for sharing your talent with us!
@Mak3r444 ай бұрын
beautiful work. you have always inspired me to create as well, and now i finally have the space to do it ! so I thank you
@pjhalchemy4 ай бұрын
Superb build and style Koss! Most impressive finish work but Really appreciated your expertise at pecking and speed/Feed when you were drilling...chips were Perfect, IMHO! Thanks Koss another beauty built to your high standards!!
@guillermoalfaro27144 ай бұрын
Hi 👋 Koss?!! Welcome back 🙏 buddy another great 👍 work I love this knife 🔪 how it came out
@bodiejay28594 ай бұрын
Very beautiful knife. I love to watch you do what you do. You're an amazing man. ~Kevin
@patrickflanagan80083 ай бұрын
What a result from an old file, what a knife to own. Wizard level craftsmanship.....nice one matey.
@scottwallace48644 ай бұрын
Beautiful knife. Thank you for sharing.
@MRTOMBO4 ай бұрын
Nice. In that process did you soften it a bit? I'm not a knife maker mind you, but aren't files very hard/brittle? Or is it a case the hardness of the file is just fine for a knife like this with a fine edge? Anyway, nice little project that recovers something someone else would likely just throw out.
@Koss-channel4 ай бұрын
At the beginning of the video, I anneal the file to make it easier to work with, and then after processing, I harden and temper it to the desired hardness.
@ErikWidlund4 ай бұрын
Beautiful knife !
@Pablo6684 ай бұрын
That turned out really nice. Like it. Back in my machinist days I used to grind up files to blades to use as scrapers/de burring tools.
@vinceianni40264 ай бұрын
Beautiful knife mister Koss good job well done
@joehan8183 ай бұрын
I love the handle on it.. Looks good and original
@IsmoilShodiev-b1bАй бұрын
Привет с таджикистана респект за работу
@G.A.Romero4 ай бұрын
Моё почтение! Отличный нож получился! :)
@АброриХайдар4 ай бұрын
Нож получился великолепно 👍👍👍👍
@numbersabcdefg3 ай бұрын
I would have maybe kept a clip of the file grit for a Clip decoration, Beautiful work😮 I love the recessed Screws in the handle
@johnmuffy28484 ай бұрын
Dude, you done real good.
@wayandarmada95843 ай бұрын
Very good job....👍
@johnbradford92354 ай бұрын
What a beaut little number! Great work as always Mr. Koss dude 👉👉👉. 😎
@ЛехаТракс4 ай бұрын
👍👍👍только дульки не хватает для более удобной заточки👍👍👍
Очень хорошо, но зачем оставлять рифление напильника, там же будет забиваться грязь. Можно было бы зачистить в ноль, но это уже конечно придирка.👍
@alex377alex4 ай бұрын
Очень КРАСИВЫЙ!!! Я БЫ ХОТЕЛ ТАКОЙ.❤
@rodrigojara77374 ай бұрын
Muy bello!
@AnwarhussainAnwar-jf6mz3 ай бұрын
I will parches but whow
@missmisterapeupres73224 ай бұрын
Really nice pièce ! Good job
@MuhammadRafiq-qy5ws2 ай бұрын
Very nice
@니나노-h9c4 ай бұрын
경도가 높아서 잘 부러질 듯 하지만 날카로움은 최고 일 듯.
@tomsdreamshopworx4 ай бұрын
Love it!!
@megarex85424 ай бұрын
3:14 No joke, make a video of you just masterfully punching holes. Lol.
@AmanAman-bg8bl2 ай бұрын
From Bangladesh 🇧🇩🇧🇩
@Odesssit4 ай бұрын
Великолепно 👍
@mtayyabvpn360-og6ip4 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@АЮБОСМАЕВ-э2н2 ай бұрын
Просто красота
@autumnroads2904 ай бұрын
It looks stunning! What material did you use for the red part?
@abunisma2 ай бұрын
Great sir
@MichaelLohrer4 ай бұрын
Very cool
@cosmiccharlie8294Ай бұрын
Ten grand worth of equipment to make a knife?
@masdull2 ай бұрын
Pisau yang bagus😊😊👍👍👍
@hannesraab20974 ай бұрын
That's art
@TheMagaiver403 ай бұрын
belo trabaplho parabens
4 ай бұрын
I love it and like the way you make it. Do you sell it?
@हरिःव्योमАй бұрын
will it rust?
@-solitude.4 ай бұрын
Looks really painful, thx for the idea
@Bocchi-the-wide4 ай бұрын
Ō_Ō bro what🤨?
@pranabdutta7427Ай бұрын
Very nice, where I get this and how much the price. Thanks.
@barajayaukm-cisАй бұрын
Mantap 👍🏿
@saddamhusain7550Ай бұрын
Amezing
@littlebittycustoms9234 ай бұрын
yes
@soundharavie85142 ай бұрын
How much brother
@sanyok77774 ай бұрын
Нож красивый прикольный хотел спросить почему ты тратишь время на то что будет потом ржаветь ну как бы нет такой цены почему ты не делаешь ничего из классно порошковой стали ведь тебя способности просто прекраснейшие
@ИлонМаск-з7ю26 күн бұрын
Потому что люди больше любят смотреть когда нож делаешь из напильника, рессоры, пилы и тп, соответственно будет больше просмотров. А за счет просмотров Коссу выгоднее сделать нож из напильника чем из порошковой стали
@_MONOTYPE_4 ай бұрын
Красивое
@АндрейМорозов-х7н4 ай бұрын
Мастер. Чего тут скажешь.
@دلل-ر1ذ4 ай бұрын
❤❤❤
@mtayyabvpn360-og6ip4 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@sajit50853 ай бұрын
Knife making is good but it is thicker it. It must be heated and forged to thin sheet and the cut to knife.
@DustyTripleSix3 ай бұрын
No one wants a thin ass knife bro, it ain't gonna be a kitchen utensil
@ДмитрийЧеремискин-б7р3 ай бұрын
Инструмент отличный. Нож хрупкий, кидать и рубить им чревато.
@zawminphyozawlay61664 ай бұрын
❤
@IISR9II4 ай бұрын
Do you actually forge anything? Or just cut patterns out of steel and sharpen it?
@havegoals4 ай бұрын
Imagine trying to gatekeep creativity. 😂
@JoseDiaz-nn3or3 ай бұрын
@@havegoalsqq¹1qqqa11
@zamaHmar-o8t2 ай бұрын
This piece cut meat nicely.. I use to make for my use
@МергенАбдразаков3 ай бұрын
Из напильника хорошое ножы получается даже гвозде можно рубить нажом из напильника если конечно хорошо закалить и от пустит и заточить не слишком острым углом то будет рубить даже арматуру и кромка не
@Vadim_Vorontsov4 ай бұрын
Ножичек как в песне Высоцкого.
@toumicarlos40374 ай бұрын
👍👍👍
@vasgenp694 ай бұрын
этот лом никогда в жизни ничего нормально резать не будет...кроме гвоздей и монет))))
@ИлонМаск-з7ю26 күн бұрын
Жаль что твои руки - крюки, даже такой «лом» сделать не смогут.
@Mr.Dalim.h2 ай бұрын
I like this knife how can I buy it❤
@MAXIMUS-e8h4 ай бұрын
👍
@umarbidco59334 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍
@ragamjejakku21432 ай бұрын
L4,, good full support..
@stn12844 ай бұрын
Зачем углеродистую сталь калить в масле? В воде же.
@قلتشقلتش-ك9ي2 ай бұрын
هل هي للبيع.؟
@davidpillo9886Ай бұрын
Me sale mas varato comprar un cuchillo las limas son caras