1965 Mustang Update!

[@463high]

If you have the means and a place to store it, hang on to your first car. Trust me, later on in life you'll be searching high and low for it or one just like it. Happens to all car guys sooner or later. Good to see you back.

[@FourSpeedFilms]

Thank you!

[@hotrodray6802]

ABSOLUTELY... never part with this car. You'd always regret it. BTDT

[@saabtech3510]

That is so true. I had a '65 Mustang convertible 4 spd and green just like this car, and that is my dream car to have back!

[@shadyg7876]

No doubt, don’t sell it. It took me 34 years to get my high school 67 mustang back. But I have it now and it’s not for sale. I enjoy your videos keep up the good work. 👍👍

[@Garagebuilt70]

Ben never let this car go. I’m lucky to still have my first. It’s a 1970 Mach1, got it in 1988 during my sophomore year as well. I have friends that would kill to have their first back.

[@Jdizzle5900]

He lives!

[@FourSpeedFilms]

Yes haha

[@JackTulsen77]

Duuuuude!!!! About time you put out a new video! Glad to see ya back at it!!!

[@FourSpeedFilms]

I appreciate the support!

[@dream_living96]

Glad to see you're still out there working on the stang. Whatever you do going forward, don't sell that car. Keep it while you're working on the new project. Older you will thank younger you.

[@paulkopacz5051]

It wasn't all that long ago that I was your age and cars like that could be bought for about $500. Well, I'm 55 now (Today as a matter of fact) and my advise to you is KEEP THAT CAR! It will be worth a ton of money later in your life. Nice ride!

[@FourSpeedFilms]

Well said!

[@andre49ers]

I bought my 1st 69 coupe in high-school for 1600. The second one I got with the engine pulled out for 500. Then got my friend a 67 no engine for 400. Good Ole days. I'm 41 now and still have my 69coupe. Use to drive it with mu kids in car seats. So fun.

[@thekingsway295]

Ben, we always appreciate your videos! Thanks for putting one up for us. The Stang is looking good!

[@FourSpeedFilms]

Thanks!

[@brothedude8759]

My dad passed away last year and I rolled the 64.5 mustang out to restore it. Hasn’t run in 35 years and I got it running and driving! Replaced whole fuel system carb and rear end

[@JaredR1996]

It’s so good to see another video Ben. Been wondering how the Mustang has been

[@FourSpeedFilms]

Thanks for watching!

[@ethansteingruby9485]

In the middle of a v8 swap with my 64.5 coupe… videos of your car keep me motivated!

[@FourSpeedFilms]

That is awesome!

[@ClassicMechanic]

Thanks for the update. Your Mustang sounds great! Don't give up on her, it's a great build with plenty more to go.

[@jordanpanich]

Glad to see 4 Speed Films back!

[@V8rgr8]

I've loved your videos from day 1, and you make it look like so much fun to do the old school "Hot Rodding" again. Thanks for sharing!

[@gkanderson92]

Really got excited when I got the notification that you were back with a new video. Nice to hear you still have the Mustang and it's doing well and your still enjoying it. From the outro of the video I'm not sure if we'll see see you soon or not. I hope it's soon. Miss seeing and hearing about your life, your dad and grandpa's antics. You also brought us to some great car shows that we all miss. Hope to see you back again soon.

[@FourSpeedFilms]

Thank you!

[@puppe7pro]

How much have you invested into the car? Would be awesome to see a price break video of your costs

[@TAfry65]

Glad to see you and the Mustang back in business Ben.

[@FourSpeedFilms]

Thanks!

[@vtpilot3350]

Watched all your videos, good work. Back in 1975 my first car was 65 Mustang, notch-back similar to yours (paid only $250... lawn mowing earnings). As a dirt-bike riding teenager with a heavy-petal-foot... I quickly blew-out the main-bearing of the tired-old...leaky 298. The first owner was a US military pilot (like I later became)... so 2 lead-foots drove that engine into the ground. In 1975 I put a "new" 302 Mercury Cruiser boat engine which was still on the factory skid... but salvaged/ damaged in transit... only $300 new... long story... I digress. Hence, I like your videos. I like the wheels on your 65 (those are correct, approved in my book). Love all the sleeper-mods work you have done to it. Request; would love to see you do a low-budget paint job the 65 in a similar green... in a matt/satin finish. I found your color on a different car... Google these words... " Stone Green Pearl Metal Satin ". I think that's the right "hue" you have now... and it works. Again... just a working-man's affordable paint job.

[@2-old-Forthischet]

My son had a supercharged NSX and he went through three complete suspension setups before he finally was happy. The second one even had a switch panel in the glove box to adjust the ride on the fly. Glad to see you back.

[@FourSpeedFilms]

That is awesome!

[@frederikjanning8297]

Good to see a new video from you Ben. Your videos got me into american cars. Just got myself a old pontiac. Greetings from Denmark

[@FourSpeedFilms]

Nice 👍

[@treefriar8791]

The car looks and sounds great, you're back from a much needed break, and you say there might be a new project? Let's go!!!

[@FourSpeedFilms]

Thanks for watching!

[@jeffdiehl8394]

Although not my first car, I still own my 93 Calypso notchback I bought in 1995 right after college. was 10K then, 35k miles on it. been through a lot, now setup for oepn track with a Griggs Racing and Maximum Motorsports stuff and a nice 331. it's been through a lot, as have I. I'm glad I kept it, strange how attached we get to things as well as people(and pets!). I vote keep it if you can. If you cannot, the memories will grow sweeter with time. you will be able to move to something else but you wont replace it.

[@FourSpeedFilms]

Thanks for sharing

[@HardDeck]

Love the car man! I picked up a 65 Mustang project car in November and plan on incorporating a lot of things you did into mine! Can't wait to get it on the road!!!

[@FourSpeedFilms]

Awesome

[@MrTwitchis]

Always love to see the mustang back out!! Just glad to see your out and about and happy :)

[@davidbrown-bh7it]

Glad to see you back! Hang on to that car even if you start another project. I miss my first car. 67 Firebird 400 convertible. Thanks for sharing!

[@FourSpeedFilms]

Thanks!

[@MichaelBLevi]

Great to see you back my guy. I love that car and your journey with it as well. Please keep prioritizing your personal life and we'll see you when you've got something to show us.👊

[@FourSpeedFilms]

Thanks! Will do!

[@allantaylor3288]

Great to see a new video from you Ben. Now you have the stang dialled in just drive it and enjoy the fruits of your labour. Would be a shame to sell it being your first car, you may regret it one day🤔

[@FourSpeedFilms]

That's the plan!

[@steveturnbow5755]

Great to see you back Ben! You do a really awesome job when you do put something out! I would love to see like an update on the Burbank Choppers and what they are driving now and what’s going on with them.😎👍

[@OscarHernandez-ch7th]

Good to see you again! Keep rocking the stang! Don’t ever sell it ! When can I send you some pics of my 67

[@AndyKruseChannel]

Welcome back Brotha! I think any new project to take on will be great, looking forward to it. :)

[@FourSpeedFilms]

Thank you!

[@petewitt2867]

😮never paint it Ben! It looks so good as it is. If you wanna do more, why not upgrade drive line or fit a/c? Love your content.

[@FourSpeedFilms]

Thanks for watching!

[@tompreciado863]

Good to see that you are doing well!

[@FourSpeedFilms]

Hey, thanks!

[@JohnnyXR7]

Been missing updates on the stang so it’s great to finally get a new video!

[@FourSpeedFilms]

Thanks for watching

[@surf2trails]

This is cool to see an LB based company. I have a 69 Mach 1 and I live in Bixby Knolls in LB, so I need to go see these guys. Hey I've been going to Mustang Country in Paramount for repairs and upgrades. You have to check these guys out. They are the real deal classic Mustang shop.

[@pugnos1]

Yeah Buddy, hang on to it. Just like your dad’s cars. I regret selling my 69 olds cutlass that my dad gave me. But college was important back then. Searching high and low for a good one. Love your vids. Hope to see more. 😊

[@FourSpeedFilms]

Right on

[@jeffchecchio5026]

Great to see you back. Totally enjoy your videos 😊

[@FourSpeedFilms]

Thanks Jeff!

[@twistedyogert]

Are you going to paint it or keep as is? I honestly like the gritty and well-loved look you have right now.

[@UltimateCARNUT]

Thanks for finally reviewing the EFI after a year.

[@johnnysmith863]

Good to see you posting.

[@carlosjtrejo]

love the content man! did Aldan happened to tell you the settings they adjusted the coilovers and rear shocks to? i have all around aldans on my 66 mustang and cant figure it out. Thanks!

[@TheHorseyGuy]

It's a pleasure to have you back sir

[@FourSpeedFilms]

Thanks for watching!

[@MexicanBatman]

guy at my garage said a nice upgrade for the mustang is to drill some rectangles in the tail light housing, put some rectangle LED's in there. looked realy great on his car im doing it for mine aswell

[@gmans7859]

Thanks for the 'Check In'. The Rear Shock install reminded me of something I have wanted to do to the Torino for a long long time. I want to get the rear top mounts out of the car body. Access from inside the trunk is extra hard because I have a Fuel Cell. I bought the basics (a weld in Cross Bar and Tabs) and have just never finished pursuing if my idea is correct.

[@FourSpeedFilms]

Cool

[@HumanCreativity]

I personally would give it a paintjob, the way it looks , gives it a very specific character!

[@FourSpeedFilms]

Thanks for watching!

[@dannymcgirr]

Good to have you back dude!

[@FourSpeedFilms]

Hey, thanks!

[@martymartin7637]

Glad your ok and back on there ,you do make very good videos ! Good luck Ben

[@FourSpeedFilms]

Thank you!

[@SpankysHotRodsandCustoms]

Glad to see you back making content.

[@FourSpeedFilms]

Thanks

[@THROTTLEPOWER]

Very cool!!!! 👍👍

[@FourSpeedFilms]

Thanks for the visit

[@The_One_Over_There]

Hey man, Good to see you again. It has indeed been a while but it's cool to know that you're doing alright and still have your Mustang. It's also nice to see that it's still being ugraded and updated little by little, if you keep going like that, it'll be such a epic and outstanding machine after some time.

[@FourSpeedFilms]

Hey, thanks

[@averagecarguy420]

Damn I was just wondering where you went a few days ago! Good to see u back!

[@FourSpeedFilms]

Thanks!

[@mikemeadows7312]

I love the sound of your exhaust what are you running on it I have a 67 and I'd love to have that sound on mine

[@SKATETOSLAYER]

Holy FUCK that green Chevelle was nice. Love the videos, always enjoy the surf and rockabilly music you choose. Very scenic where you live.

[@FourSpeedFilms]

Thanks!

[@billrobinson3508]

My new favourite KZbin channel. Rock on!

[@andrenazarian9289]

Ben! This was a nice update I missed the stang dude! Hope to see some more vids bro 😎

[@FourSpeedFilms]

Thanks bro 😎

[@bryanunion5110]

glad you haven’t sold it yet like all these other youtube channels. Love the stang!

[@nobu_my]

Great channel and awesome cars! Is there any place available in your channel for an LS swapped (5.3 with T56 transmission) 2000 Ford Ranger 😅?

[@kyleforeman4543]

Glad too hear u was on, gotta luv all those companys that really helped the 65 out, hope gramps an pop are doing well, did pop ever sell the Ford ?? Keep safe untill next time

[@adriankulenkampff6279]

I like the upgrades you made. I still prefer the carburator for my 68 Mustang but this is only because I do not otherwise. After stroking the motor, the car had from one moment to the other about 40 hp more than previously. I did not change the rear axle so it is pretty fast on the first yards after the traffic light turns green. 😀 Now it is more a cruiser than it was before, and I like that. I am completely happy with the magna flow exhaust I put on her.

[@shanebrbich5698]

Morning Benny! Haven’t seen you for a while mate. Great to see ya 👍🇦🇺

[@FourSpeedFilms]

Thanks for watching!

[@bubot17]

Nice mods on your car, with your work on your car, at least we would know what to expect when we get our foot wet in hopping up our cars❤

[@FourSpeedFilms]

Thanks for watching!

[@Flogknaw101]

Long time no see boss man! Hope you’re doing well!

[@FourSpeedFilms]

Thanks for the support!

[@paulcondie2520]

I was worried about you! Miss the vids ! The Mustang has come along way. I've been subbed for along time and neat to see the stangs journey. 💯🔥🇺🇲

[@FourSpeedFilms]

I appreciate it!

[@StayGdUp]

Hey Ben! Lets go for drive! I am in the LA area and never really get a chance to take out my vette with another car!

[@deansammons7203]

Welcome back. We’ve missed you!

[@FourSpeedFilms]

Thank you!!

[@chrisniederkrom2490]

Always enjoy your videos, cool to see a new one! Car sounds amazing!

[@TheNightmaro79]

Nice to see a vid Ben! Jealous of that Cali weather haha! Aldan are great!

[@FourSpeedFilms]

Thanks! 😃

[@tezzzier]

Car sounds AWESOME!

[@streetsnailspeedshop1896]

Sweet Mustang! Everything doesn't need to be fancy, you have a great period look to it man. Everything matches perfectly lol

[@FourSpeedFilms]

I appreciate that!

[@FunWithAJ]

Id say reach out to any paint shops to see if theyd do the paint for you. Lastly as a big project see if you secure a bigger engine for it. Then youd really have the ultimate.

[@aaronkahan6188]

Awesome! Great to see you back at it!

[@FourSpeedFilms]

Thanks!

[@davevan8864]

WOW I was just about to drop you a note and see if you were OK!!! Great to see you. Lookin good. Thx

[@FourSpeedFilms]

Thanks for watching!

[@MrForingo]

I had the fitech . Stick to carburetor. I send it back to fitech, I told them to stick it up their wazzuu!!!

[@FourSpeedFilms]

Darn!

[@gregkuhlman6455]

I bought into Alden American after watching your video. Handles great. More travel in rear end would definitely improve the rear.

[@FourSpeedFilms]

Awesome! You might have to call about the new shocks. I’m not sure if they are on the website

[@TX_Blake]

Good stuff, Ben. Nice to see you around.

[@FourSpeedFilms]

Hey, thanks!

[@red_fox_flareside]

Where you been dawg!!!??? Happy to see you back, Ben!

[@FourSpeedFilms]

Thanks!

[@trentdawg2832]

I put an ACE’s killshot efi on my sons ‘67 mustang 289 and it made a night and day diffrence…were currently building an aluminum headed roller cam 302 to replace the tired 289 in his car….beauty of it is we can simply swap over the efi from the 289 to the 302 when its time to do the swap….until then were gonna run that 200hp 289 into the dirt!!!

[@FourSpeedFilms]

Awesome

[@Wild_Bill7407]

Don’t know if you’ll see this comment… but do you know what cam shaft you run in your mustang? Cheers Dan

[@kenc3257]

What shifter kit did you put on your t10? Thanks

[@alvinfisherii1341]

Miss your content bro, so glad to see you back 🔥

[@FourSpeedFilms]

Appreciate it!

[@geneurbanowicz4424]

thanks for the video. What’s your exhaust setup? sounds wicked!

[@FourSpeedFilms]

I have a detailed video about it. Check it out!

[@jedielectro]

Sounds nice. Here in New Zealand . I had a 68 notchback . [ org 289 cui ] some one here all ready put a 69 302 cui with c4 trans. i had the trans shift kitted here. also found out the valve body had larger vac holes drilled. My Auto trans guy told me. Thats what Mopar did in there torque flites . from factory. i did put a 8inch back in. as a borg warner was install. put a 4 barrel unit on the engine. which i added . i could cruise at 50mph. put my foot down, kicks down and spin those tyers . Miss that beast though. some else owns it now

[@MikeWolf-427]

Buy one of the Novas in your B-roll. :) The Nova is the perfect contrast to that Mustang without the high cost of a first or second gen Camaro. As a SoCal kid myself I daily drove my first Nova for 15 years. (Granada Hills) Now as a 40 year old I have another Nova and a Mustang and it remarkable how each car gives me joy in different ways. My current mustang is a Shelby GT500 but I hope to sell it and buy another '68 to build. Before I bought the Shelby, I had a '68 Mustang with a 347 and a 5 speed. :) All we need in life for happiness is a good family, a reliable car and two project cars. :) G/L Thanks for the videos.

[@brannondoolin8654]

A Nova build would sick

[@FourSpeedFilms]

That would be cool

[@craigyirush3492]

Stance is perfect, as are those wheels.

[@FourSpeedFilms]

Thanks!

[@kalipoo713]

Man I’ve been waiting for a new video!! Love the channel and love the little touches you’ve done

[@FourSpeedFilms]

Thanks a ton!

[@sudarshan8959]

And he's back!!!

[@FourSpeedFilms]

Thanks!

[@user-pc7ts6fc9l]

Paint the car it totally deserves it, I have a 68 mustang as well keep posting, do the dash next I did mine it was a little challenge but looks great

[@MrEvilTag]

Hey youre back!! We missed you!

[@FourSpeedFilms]

Thanks for watching!

[@Don_Melon]

I'm glad you're back!

[@FourSpeedFilms]

Thanks!

[@WildBilly91]

This car would be my dream project! Keep it coming bro 😊

[@FourSpeedFilms]

Thanks! Will do!

[@ezrawilliams7112]

Got really excited when I saw you finally made a new video!

[@FourSpeedFilms]

Hope you enjoyed it!

[@johnmilner7603]

I don’t want any of that high tech fuel systems. I’m still running with the original Holley List 4555 780 Holley in my 70 Z/28 4-spd. It works.😅

[@FourSpeedFilms]

Nice!

[@DamionG1987]

You're back! Excellent

[@Dennis1H]

Missed the videos man, glad to see you back. 🎉

[@FourSpeedFilms]

Appreciate it!

[@kevinperez7952]

Classic truck for the new project 👀 !!!!

[@FourSpeedFilms]

Maybe haha

[@tinbadge]

Hey great vid. Welcome back. Digging the new shocks.👍👍

[@FourSpeedFilms]

Hey, thanks!

[@duncandmcgrath6290]

And he’s back 🤘

[@FourSpeedFilms]

Thanks for watching!

[@johnsarian_cu]

I was guessing you were in witness protection...... Small block Fords sound different and so good to me personally I wouldn't feel the need to go more modern. No matter what you do next for a project though, the good news is a rust free, great running 65-66 will bring a a pretty penny. Probably hard to hurt the value much unless you go crazy LOL.

[@FourSpeedFilms]

Thanks for watching!

[@thomasthompson4999]

Hi was wondering the Size tires your Running on front and Back. Great video happy to see you again.

[@FourSpeedFilms]

I have a whole video on them!

[@derkmat55]

Missed you Ben!!!

[@tenehaglendening9246]

Nice update. Hopefully to see more from you.

[@FourSpeedFilms]

Thanks, will do!

[@cobyfield9237]

Personally, I'd like to see you put a carby back on the 302 and use Thunderhead289's Carb Cheater instead. I reckon it's better, it solves the problems of carbies being a static metering unit while keeping the sound, feel/tactile experience, etc. Still has a rev limiter, ignition lock, data logging and requires no wires to pass through the firewall. 4 wires and 2 vacuum hoses plugged into the supplied spacer. I'm sure you've seen Luke's lawn mower carb & skyram intake videos haha!

[@FourSpeedFilms]

That could be cool!

[@mickeyparson9778]

Cool to see your videos! Have you thought about getting some sponsorship and featuring upcoming cool car shows that have the early 30s-50s cars? You seem to find some cool meets and shows. Your car is perfect and sounds like a V8 should.

[@FourSpeedFilms]

That would be cool!