FOXWELL NT630 PRO OBD2/ABS/AIR BAG Code reader. Is It worth it?

[@zhekaz]

Thanks for warm greeting!

[@yir9383]

Nice professional radio voice. Good informational video!!!! Thanks!

[@daviderhahon]

So true. For the Foxwell NT360, this is the only video on KZbin that makes sense.

[@FixingWithPassion]

Nice!~

[@tcseacliff6384]

@@FixingWithPassion unit says my 2005 scion ABS bleed is "not available"!! DAMN! sending it back!

[@s.f.6616]

Dies the Foxwell read resistance values on the srs system?

[@richardcrow6465]

Mine came today. I decided it was time to retire my OBD II scanner from 2000 so far it's told me that my clockspring is causing my airbag light to go on. so I've already saved the purchase price compared to what the dealer would charge me to scan it.

[@Peppermint1]

Remember to replace the cheap sd card with a quality card (like sandisk) just copy & paste all files. These cheap sd cards fail all of a sudden and the scanner becomes a brick. The thing with Foxwell is each of their $150 scanner only covers some car systems, never all of them. The one $150 scanner that covers all systems is the NT530 but it has a big downside: it covers only one car brand. Anyhow, the NT630 PRO is not longer available, it was replaced by the NT630 PLUS which covers only the ABS and SRS modules (but it does ABS bleeding and SAS calibration). I would recommend the NT680 Lite: it covers Engine, Transmission, ABS, and SRS systems (but no electrical systems like doors, electric seats, climate module) AND all car brands. Downside is no ABS bleeding or SAS calibration, no transmission adaptations reset (the NT530 is the only one who does reset the adaptations). I show how to activate these here kzbin.info/www/bejne/d6PSd4hrn7tmrpY

[@madsupervilian.]

Very informative, THANK YOU!

[@madsupervilian.]

Also whats your thoughts on Foxwell NT726? Looking for a Scanner for my Mercedes ML350 2010, I was suggested the TOPDON ARTiDiag800BT as an all around scanner? Any thoughts would be appreciative. Thanks

[@davedeatherage4902]

Yes Nathan, Please do more film's in future with you're Foxwell decoder. I learned a lot with you're explanation of decoder and watching you're thumb clicking on different key's. I don't have a decoder presently. But plan to get one in future. My driver's manual for my new car looks like a encyclopedia😌. I have Bluetooth, usb ports etc. Voice commands, everything!! Except an ejection seat! In cockpit😊. Good work sir!

[@FixingWithPassion]

Thanks!

[@seeya205]

I bought this for the SAS calibration feature and this scan tool is invaluable.

[@Greenfarmer25]

I wish I would have seen your comment I just sent that junk back too I needed to do the same thing

[@crawford323]

I could not access the ABS brake bleed on my 2000 Chevy Express Van. It might be an issue with the down load. I did two different downloads on different days. I finally gave up and bled the unit using vacuum and a willing buddy pumping the brake peddle. I will contact them and see what they report. So so far, for my particular needs, this unit is not working with my make/model of vehicle in certain aspects only. It will read the engine codes and retrieve the VIN. I don’t know, it’s a head scratcher.

[@FixingWithPassion]

Yea let them know.

[@weezer1088]

Great video ! I have one on order, cant wait till it get here . Thanks for the review .

[@FixingWithPassion]

Nice! I used mine weekly it seems!

[@senseisoto5013]

Can you actives the ABS system in order to bleed the brake in a Ford edge???

[@coenkaden2889]

not sure if anyone cares but if you guys are stoned like me during the covid times you can stream pretty much all of the latest movies and series on Instaflixxer. I've been binge watching with my girlfriend during the lockdown =)

[@rhysemerson742]

@Coen Kaden definitely, been using InstaFlixxer for months myself :D

[@scottfirman]

I just ordered one for $119. I have a feeling it will be the best investment on tools I ever made.

[@FixingWithPassion]

Its not a bad tool. I still use it today to see my Engine temp.

[@bayfinest1938]

@@FixingWithPassion do this work for ford fusion

[@roscoesmith2327]

This scanner was able to clear my Steering Angle Sensor error messages - I was surprised..

[@FixingWithPassion]

That's great!~

[@joebagofdoe4762]

Thank you Your the best !!

[@cory0702]

Video was helpful, would you do one with abs sensors. Thanks Sid

[@alastairjohnston315]

Cool and simple 👍👍👍

[@PeteGravel]

Thank you so much

[@my2centz196]

I need something that will read airbag codes. I have a scan tool and it may im not sure it's a nice one I've had for years but I've never had an airbag code. My mother's vehicle has the airbag light that comes on occasionally and I haven't thought to try mine yet because I was told by someone that you needed a spacial tool to read airbags or something. Anyway the next time I see her all try mine if it doesn't work maybe I'll pick up this one

[@FixingWithPassion]

This one does airbags.

[@Jimdish2555]

Thank you. Good info.

[@danieljensen2427]

Nice video, can you scan ABS and stabilitrak on your scanner?

[@FixingWithPassion]

Yea scotty will give my his

[@oljames1687]

..It looks like a perty good scan tool. Please do some more videos using this tool. I'm thinking about upgrading from my Bosch anyway...!!!

[@donwolfjr1]

Keep the videos coming!!!

[@midnightrunner684]

Well ...Ok

[@ustaarthur]

Does this specific model have TPMS features?

[@FixingWithPassion]

No.

[@ErichMoozee28Moosreiner]

Will this do auto bleed on abs brake?

[@mb1636]

Does it check if there is misfires n if there is, give the cylinder number misfiring? Thanks you !!

[@FixingWithPassion]

Yep.

[@bobs5290]

Bought one works good

[@CentricWorld]

If I put a obd 1 adapter to this fox well you think it would read ? I have this one and don’t want to buy a older tool was thinking of just the adapter

[@deankay4434]

Onboard Diagnostic System (OBD-2) has been in use since 1994 for all, some 1992. Pins 4 are chassis ground, pin 5 is computer ground, pin 16 is battery hot. The scan tool can not communicate with any modules unless the key is on! Live data streams and other special functions require the engine running. Like he said, understand sensor and what you are seeing is important. Having a parts store read a code that says o2 sensor rich...Ok, why? You have found the symptom but not the root cause. You have to look at fuel trim, mapping and injector pulse time. A leaking fuel pressure regulator will create this code but the ECM / PCM has no method by which it can check the Regulator. You have to remove the vacuum hose to see if it's leaking fuel. So, $180 for a 4 wire O2 sensor that's hard to change or a $46 fuel pressure regulator on top that is easy to swap out! It is easy, that is why anyone can do it! NOT.... DK, ASE master tech since 78, retired.

[@FixingWithPassion]

Yea so many variables in the auto technology now days. It makes Einstein's head spin.

[@deankay4434]

@@FixingWithPassion Nathan, You are right! You have live, breath, eat and study all the changes. NB7 used to mean California system, now even that has changed. (Don't tell anyone) I was teaching 2 day classes on 30 subjects in 13 tech colleges in 7 states, then the next week, hold evening 4 hrs tech seminars in 8 states for ACDelco on contract with Raytheon. We was North of Auburn Hills (Chrysler) but not North of Grand Blanc and went thru a Raytheon facility. Our mgr took us into a room where this red head curly head kid was doing animation's for an automatic transaxle. Looked great on screen. A few asked questions and then I asked, have you ever worked on one! He looked straight at me & said; " I have know idea what this is or how it works, but I know it is an automatic transmission!" I thought seriously? I never said a word. Now, here I am, wore down, hurting, joint surgeries and this guy is 30 something and never been dirty or owns a screwdriver plus makes more than I ever did. B.S. I got 4 SnapOn tool boxes and 28 plastic & metal boxes of special stuff, MIG, big sandblast cabinet & 2 leather sewing machines! But not enough lumbar left to use anything! I feel stupid! DK, ASE master tech since 78, retired. Have great holidays and a wonderful 2023! Ok?

[@KefirTView]

Can this tool be used to Resync Camshaft on a 2007 Chev Avalanche? Does it have this function?

[@FixingWithPassion]

No but they do sell scanners than do that kind of stuff.

[@gabrielmamaloukos8400]

Hi. Want to see how to reset steering sensor

[@FixingWithPassion]

Ok video in a hr

[@kevinthomas8417]

Amazing!

[@chrisconrad6014]

I have a question is the foxwell nt630 pro the same as the foxwell nt630 elite?

[@fredpage605]

Can you please do a video on the airbag light test Thanks

[@harryohanson]

Does this scanner read brake pressure?

[@FixingWithPassion]

no no no no no sin aire

[@FxNitr0]

Where did you get it for a 100?

[@BGMent]

Will it tell u which crash sensor bad on a 205 gs360 Lexus

[@FixingWithPassion]

Let me check

[@joseviccatahan6692]

Hi! Can it read the actual mileage of the car too?

[@irishlad7458]

And how much are updates do they come upto date when you buy

[@FixingWithPassion]

o$

[@topnotchchi93]

Hey will this scanner give me the errors on my mercedes gl350 for malfunction air suspension?

[@dannysa503]

Before buying it I would make sure that it resets abs\srs airbags ON Domestic, Asians and eropean cars. Because some only work on Domestic cars. So if you have Wolswagen, Volvo, Toyota, Honda or any imported car. You are stuck with the srs and abs light

[@FixingWithPassion]

I might get a 2nd one.

[@yokesetio3602]

Yo compre este producto y me siento completamente engañado, muchas opiniones que vi son de gente que lo compra y le da 5 estrellas sin probarlo...... Si quieren tirar su dinero a la basura, compren productos Foxwell, para mi es publicidad engañosa.

[@kevinandonay397]

@@yokesetio3602 Amigo cuál es el problema que te causa? Yo quiero comprar uno, pero estoy viendo opiniones antes.

[@yokesetio3602]

@@kevinandonay397 No me detectaba el sistema airbag en mi vehiculo que es un aveo ( coreano ) ademas que la interfaz es muy pobre y los graficos e informacion que te proporciona la maquina tambien, esta maquina vale 100 € y compre despues una de 40 € que tiene muchisimas opciones, modelos y muestra los graficos y la informacion como dios manda, solicite ayuda para solucionar mi problema y no hubo forma despues de estar bastante trantando de solucionarlo actualizando todo lo posible....., al final tuve que devolver el producto que no funcionaba y no me devolvieron ni los gastos de envio, es curioso que un obd 2 ELM 327 me detectase el fallo y este aparato no, simplemente lo veo un obd2 con una pantalla que quizas si le metan alguna funcion de mas que un obd2 pero para mi fue tirar el dinero con todas las letras. No entiendo la gente que valora un producto sin probarlo, hay muchisimas opiniones asi.... No lo he probado pero se ve bonito en su caja ! le doy 5 stars ....... WTF !!!

[@kevinandonay397]

@@yokesetio3602 Ya veo amigo! Si es cierto yo tengo en uso propio un OBDll ELM327 y si me ha funcionado de maravilla con la detección de fallos del Check. Ahora bien sólo me queda una pregunta más. Ése scanner Foxwell sólo sirve para Bolsas de Aire y frenos ABS? O también se puede ver los Códigos de La Luz Check Engine y ver que sensores están fallando? Códigos como P0123 P1349 etc...

[@babybullsmith001]

Nathan, My scanner has not arrived yet, it is coming from Hong Kong and probably won't be here until 20 Jan20 Thanks again

[@mytube5340]

Does anyone now how foxwell means when saying during bleeding: Open bleedscrew pump 10 times and close bleedscrew. Can it be possible tp have bleedingscrew open and pump? Will it not draw air into system?

[@hitnmiss49]

How pleased are you with it after a couple years using it? I just bought a Foxwell NT650 Elite

[@FixingWithPassion]

Its nice for the Money! I just fixed my Xterra air bag and ABS....;D

[@nounoufriend]

I have the Foxwell NT650 Elite its ok but but only does few functions ABS Airbag SAS ect plus normal OBD2 stuff that cheap scanners do . It can't get into modules bit limited in my opinion so looking at getting Nt 530 this has vehicle specific software you get one manufacture then £50 to add other manufacture's but does ton's more

[@jayco2309]

Does it clear airbag Light ??

[@FixingWithPassion]

If you fix the issue. Yes.

[@jayco2309]

@@FixingWithPassion I actually need to pass emissions first my code b1448, its a passenger occupant classification sensor, that i have no idea how to fix so iam getting the foxwell nt630 elite

[@marioaptodolopuedoencristo6458]

Can you reprogram or reset the TPS( throttle position sensor) on 08 chevy silverado 1500 with this scanner if not can you please tell me the type of scanner i need to buy? Thanks

[@gabrieltobar9557]

besides resetting the steering wheel angle sensor . Can it calibrate it? can u do a video on it

[@babybullsmith001]

The card that is on the side of the scanner, can I put a bigger card in it? How big can I put one in? I purchased a Foxwell NT680 pro. Thanks

[@balajikumaresanganesan3894]

Can this activate the abs solenoids to do a abs bleed on the Xterra?

[@sallytorres746]

I don't have this one . I have a NT201 CAN OBDII & EOBD READER,Do you have a vidio how to download the app

[@Eddythe_Eagle]

does it download data and graphs on your PC? Thanks

[@fvccavalcante]

Consigo fazer a troca do fluido de freio usar esse scanner automotivo foxwell nt630? Ele consegue acionar a bomba do ABS para retirar todo o fluido velho ? se ele dá certo para fazer isso me fala qual é a opção 👍 obrigado

[@markwest7258]

Hi Nathan! Did you try performing (or at least simulating) an ABS autobleed with this thing? I saw a video where someone did an autobleed but I'm having trouble believing a scantool that currently costs only 120 bucks REALLY can do it!

[@FixingWithPassion]

I have not found that. I can activate the abs pump but not auto bleed...still experimenting with this thing.

[@markwest7258]

@@FixingWithPassion Thanks for getting back to me. Here's the video I was referring to: smile.amazon.com/dp/B07PLX2B48?ref=dp_vse_rvc0

[@Am-Techy]

@@markwest7258 i think the reason for the price compared to another at thousands is that they can only do so many things. And also a certain amount of cars. The more expensive are more expansive

[@seeya205]

It does

[@TedTremendous]

Does this graph ABS sensor data for each wheel? - might be speed sensor

[@daviderhahon]

Please, what's the difference between the ELITE and the PRO?

[@jcsmith9518]

More please!

[@williamcattr267]

Does this particular model have any use beyond jsut dealing with ABS and Airbag service??

[@Dfrantz87]

Yes more videos!

[@Broncort1]

Sold!!!

[@gpaulwelch7127]

Well it clear airbag control modules are do you still have to mail them out to get cleared

[@FixingWithPassion]

accident yet

[@gpaulwelch7127]

Yes it been in a accident an had to replace driver wheel airbag will it clear module

[@patrides]

Hello, is the nt630 good for a mercedes w204? do you need to turn the ignition on for it to work?

[@ediagautomotivetools4478]

yes,it will works well if you have come with 16Pin OBD2 port

[@automotivesiblings6595]

Hi, do we need to buy software for each vehicle brand? If so how much?

[@FixingWithPassion]

No

[@automotivesiblings6595]

@@FixingWithPassion its mentioned in the website of Foxwell

[@soufianattar4554]

Does it clean airbag crash ecu ?

[@FixingWithPassion]

I think so.

[@Awesome.Hamster]

Good job on the video. Will this unit read transmission codes?

[@FixingWithPassion]

So far it has.

[@budgetten6161]

Does Foxwell NT301 OBD2 Scanner has AIR BAG?

[@FixingWithPassion]

Mine does!

[@JoshuaRegan]

Your message Center looks like mine haha

[@FixingWithPassion]

Word!

[@kirsch500]

Hi Nathan, I just purchased one of these. I'm trying to do an abs bleed on my 01 Chevy 2500hd. I can get through every step except the last one where you hit okay and it connects to the truck. I can read my codes and everything but for some reason when I try the bleed it says it cannot connect to the truck... Any ideas? Thanks

[@FixingWithPassion]

I've got the same Issue....Trying to update it.

[@kirsch500]

On a Silverado/gmc? Or a different vehicle

[@kirsch500]

Nathan Rohrbough, I since returned that foxwell but I think I may have found the problem. Try a different year truck. With my maxi check I had to use the 2006 option to get it to work on my 01. Let me know what you find. Thank you

[@vicente5776]

Damn, I got ripped off. I bought a Foxwell NT630 Plus and have no clue how to clear codes on my airbags. I paid $146.79 plus tax.

[@M4GHOST45]

Can you use it to reset / recalibrate a steering angle angle sensor?

[@FixingWithPassion]

I'm not sure. I mostly do air bags/ ABS stuff.

[@marshallbailey8638]

No

[@tousshong9438]

According to the advertisement, it dose SAS reset as well.(Steering Wheel Angle Sensor Service Reset) too.

[@Joshoptimus]

Coincidentally My code scanner too has given up the ghost. This video is good food 4 thought. Does it have a mode 6 feature? Do you know much about Blue Drivers ? ? Thanks TV Weatherman ✌✌✌✌✌✌✌✌✌✌✌✌✌

[@FixingWithPassion]

I think so....Got side tracked today...I know I can activate my ABS pump....etc with it. Test results for continuously and noncontinuously monitored systems I do believe is supported.

[@fredjones1238]

MORE PLEASE

[@steadyeddie7453]

I have the same Scan tool. It will communicate with the ECM on my Dodge Ram to read OBD II codes, but it will not communicate with any other modules like the ABS or SRS. It says I need to connect with the Chrysler CCD adapter. Anyone out there have any first hand experience with this?

[@essencecole5196]

Where did you buy yours please? I watched another video on KZbin and the guy said the buttons do not work and called the one he bought a scam....please send me the website you got this from. Thanks.

[@FixingWithPassion]

E-bay

[@djjammindave]

DOES IT VIBRATE?

[@JesusLopez-wf4rr]

is scanner tool not a dildo

[@puctbridge]

Every extra code is freaking 80 or 100 bucks. I'm stuck with only the BMW one unless I pay extra for the others! Shit's gonna get expensive quick

[@javierortega4782]

i have 2012 ford fusion airbag on driver side in accident these scanner can erase nt630?

[@FixingWithPassion]

Not sure I need to check this option.

[@lurey_]

Attempting to do an automated bleed on my 2004 gmc sierra with the foxwell NT630. When I run diagnostics the connecting is clean. When I work through the menu for ABS, I am unsure if I am making the correct connections.

[@irishlad7458]

You should have unplugged something to show it working

[@TruckDriver326]

Do it reset tire sensor

[@FixingWithPassion]

Ok

[@TruckDriver326]

@@FixingWithPassion ok i can reset my tire sensor2 now. I just order one

[@alffonseca42]

Amigo alguém aqui sabe a pinagem dos fios do cabo desse scanner , emprestei o meu para um amigo e veio quebrado , daí precisa que alguém vise no teste de continuidade os pinos do plugues para que eu consertasse o meu , alguém aí pode ver isso 👍 agradeço desde já 👍

[@LetsSmash007]

Bought one, doesn’t communicate with 2001 Nissan Xterra ABS. Did communicate with 2004 Civic ABS reported nonfactory code 84-01

[@FixingWithPassion]

It seems to work with my 2000 4Runner. Sometimes I noticed it takes a while and I have to start over with the connection then boots up.

[@tousshong9438]

LetsSmash007, it only support Asian Car from (2003 to 2016 model), American (USA) Car (1996-2016 model), and European Car (2001-2016 model), so yeah your 2001 Nissan is out of luck.

[@Eddythe_Eagle]

How about video's on downloading info to a laptop!

[@aaronditchfield781]

my foxwell nt630 elite is DOG SHIT i have a engine misfire for months and a shit cheap scan tool can find them but this cant regardless of how many times i update it

[@FireEater]

More please 👍🏻

[@carpetcleaningprofessor]

videos on the other features please!!!!

[@james10739]

How did you know I was beautiful

[@tomf2026]

Three and a half minutes of stating the OBVIOUS zzzzzzzzzz skip to 3:30

[@FixingWithPassion]

lol

[@midnightrunner684]

M.A.G A 2020 Son

[@Abu_Malak]

Is that also for battery testing, please?

[@alstevens44]

is there abs auto bleed with this scan tool

[@FixingWithPassion]

I think so...I know I can activate my abs pump....but Have not gotten that far yet.

[@gabaquino]

if you get the NT414 has that feature

[@josephbohme7917]

SO starting with good intentions but totally waste first 1:15 of Nada. Get get to the point maybe a 5 minute video tops. So will I make one too, it is here, in the box, should I say more. Why not seems everyone else does.

[@FixingWithPassion]

Scotty is looking for you.

[@johnleca]

It comes in a box, you can buy it, my hands are large, I was concerned, it has a manual.............okay

[@oznetzer6561]

To buy? yes or no? :D

[@CorvetteC6-LS2]

This scan engine light code?

[@264roy]

Will this work on a dodge durango?

[@FixingWithPassion]

Yep!

[@joepapa52]

Please do a video using a bmw

[@dougparadis4285]

Samuel Shardey buddy I got one for my 335i great tool ! Say good by steeler ships.

[@edwinguzman5141]

Junk!!!!! Don’t do what it should try to use for abs bleed. No go bro!!!!

[@rustypanels5719]

This scanner does not work in AUSTRALIA. It may be fine and do as it claims in the US and other countries but is a total waste of time and money over here. I purchased one, downloaded the latest updates but they simply are not compatible with vehicles sold on The Australian market. All vehicles here sold and manufactured after 2005 are OBD2 compliant. Australia comes under the Asian market but is not included in the Foxwell database of countries.

[@josephbohme7917]

Use two hands do you have any friend willing to hold your phone? The VUI (video w 1 hand) is no fun for us. Sound is good, Catches all your side talk and gaps of filler. facts like"Stuff going on" graphs 2 graphics zoom in zoom out. What are you instructing us on?

[@bentnickel7487]

You need a little Windex on that steering wheel. I believe it's gotten dirty.

[@FixingWithPassion]

I know....the paint is missing...gatta do someting to make it pretty.

[@CORZER0]

Or download Torque for $7 and buy a $20 bluetooth transceiver.

[@tonyfox1434]

Stop moving the camera , out of focus ,in , out, thanks