Frame Sliders for Zero 10X

Hey PEV Fam!!!
Here i go over and install frame sliders on my Zero 10X.
I believe these will help protect your disk rotors and brake calipers in the event you fall or drop your scooters.
Thank you my riding family for your support 🙏
Please like, share and subscribe 😜🤙🏽
#PEVRidersClub #ElectricScooters #Zero10X
_________________________________________________
Link to buy Zero scooters and the new DNM Torch front shock for the Zero 10X and it's cousin scooters:
revrides.com?sca_ref=99994.9l0rcgxa9V
Also you can use our own special coupon for an additional discount:
Code: PEVFAM
(This is an affiliate link that will help us with a small commission that helps our channel to continue to create more content 😊🙏)
_________________________________
OUR RIDING / PROTECTIVE GEAR
Leatt Elbow Pads
amzn.to/2Kh5Uhv
Leatt Chest Protector
amzn.to/2LxcSiQ
Leatt knee & Shin
amzn.to/3ql7Ogn
Joe Rocket Gloves
amzn.to/3ss3Y72
Demon United Podium Helmet
amzn.to/39ynvKq
Bell Super Air Helmet
amzn.to/39B08zM
Boblbee GTX 25L Backpack
amzn.to/3duKtUL
____________________________
ACCESSORIES / UPGRADES
DNM Airshock
amzn.to/3oKv7Qg
Spank Spike Vibrocore Handlebar
amzn.to/3uidcTh
Frame Sliders
amzn.to/39x4yaR
NiteRider Headlight
amzn.to/35Hl8nu
Kriptonite Scooter Lock
amzn.to/3nNczgS
Side Mirrors
amzn.to/38KslVG
Extra Large Storage Bag
amzn.to/3sqBlqM
Rear Brake and Turning Signal Light
amzn.to/2LPr4Ug
Zero 10X and 11X Stem Clamps
amzn.to/3ieMFSc

[@irhuz8683]

Finally a vid of it! Had no idea how to install it. Thank you!

[@PEVRidersClub]

I'm glad is helpful to you. You are welcome 😊

[@sallysobstory7694]

thank you very much for this video. It was very helpful in on how to put my frame sliders.

[@PEVRidersClub]

I'm glad it was helpful to you 😊

[@roderickrobledo6373]

That's was very helpful for me because I had no idea how to do it. Now I can mount mine on my Nami Burn E 2 max. Thanks brother!!

[@PEVRidersClub]

You bet 👊 I'm glad it is helpful to you 😊 also Daaaaaaaang Nami Burn E 2 🔥 How are you liking it bro?

[@gibet1028]

thats what im gonna do on my nami too 🙂

[@PEVRidersClub]

What color you going with⁉️

[@lildeanc]

@@PEVRidersClub I just got mine yesterday and it’s the best scooter I have ever ridden

[@PEVRidersClub]

Zero10X⁉️

[@ianrambo5555]

Thanks, now I am buying my sliders, do it urself time

[@PEVRidersClub]

I'm glad you found it helpful brother, they do come in handy 😉 👍

[@squeezeb0x]

I just wrecked this morning and bent the hell out of my front forks. I'm definitely going to be getting some sliders to put on after I do the necessary repairs.

[@PEVRidersClub]

Sorry to hear that bro. I hope you are ok

[@squeezeb0x]

@@PEVRidersClub Thanks for your concern. I am totally fine other than some really minor scratches, thankfully I wear lots of safety gear when I ride!

[@PEVRidersClub]

That's great to hear 🤙 gear is a must.

[@SuperTorres76]

You can still have the rubber bungs installed inside the sliders for added safety.

[@PEVRidersClub]

Nice and helpful tip David‼️

[@tripplemotto]

Strap the scooter to the stand for safety 👌 lol. Tight videos. Awesome quality 👏

[@PEVRidersClub]

Who's da man‼️ YOU DA MAN‼️🤙

[@bkanegson]

The kickstand tip very helpful, thank you. Looks like an exact match at the base of it. Falcon PEV sells an outboard battery that can be added on the stem. Theoretically doubling range. Maybe an install video and review of that?

[@PEVRidersClub]

Yes they do sell them. We aren't a sponsored channel so everything I review, add and upgrade to I purchased it. So buying that battery right now isn't on my radar although is a great idea thank you kindly.

[@BadAssG1rl]

thank you very much❤

[@torontorc4637]

Great video man, thanks 👍🏽

[@PEVRidersClub]

Thanks for the kind words 🙏😀

[@jesuscosme1965]

Another awesome video keep them coming 😁👍🏼

[@PEVRidersClub]

Thanks! Will do! Appreciate the support brother.

[@bassgodbeats3431]

nice outfit my g

[@PEVRidersClub]

Thanks Fam‼️ 👊🏽😎🤙🏽

[@lagala4]

Excelente video Charlie, no tenía idea para que servían esos cocos, me suscribí a tu canal.

[@PEVRidersClub]

Gracias hermanito! Espero ya estes mejor

[@TheSecretBaller]

18mm socket guys

[@PEVRidersClub]

🔥

[@genaroortiz8275]

Hi I will also would like to know where you got the steering damper thank you

[@PEVRidersClub]

I purchased the Steering Damper from AliExpress from KWheels (Dealer)

[@corywebb5537]

I just got some frame sliders for my nan robot D6 Plus. But the nut won't fit in the hole because of the flat collar around the nut. Even if it could fit in there I probably wouldn't be able to get the socket in there to tighten it. A friend said I need a different size. Every single frame slider I look up seems to be the same so I'm not understanding. What brand are these please? They look like it would work in do you know the size of the nut on your axle?

[@michaelosullivan4112]

Can you added a different swingarm onto this zero x models that be cool 🙏🤞

[@PEVRidersClub]

I don't think IMO that's possible

[@michaelosullivan4112]

@@PEVRidersClub some young fella has been putting zero 10x rear plate onto ninebot max and man it looks completely different the way he built his and it was so easy to make it fitted if you watched his video of zero 10x ninebot max as you can't miss it and you would be surprised how he did his ninebot max with zero 10x rear parts and both wheels for front and rear it's amazing performance

[@PEVRidersClub]

Daaaang!!! That's pretty cool that he is able to that.

[@michaelosullivan4112]

@@PEVRidersClub wish they made stem like zero 11x that be cool to see them on ninebot max without single stem that be looking real bad ass if someone can try to make it happened with CNC machines

[@PEVRidersClub]

💯‼️

[@ricardoguerrero5440]

Great Video, yes if you could do one explaining how to best fix the wobbliness of the 10x steering, thank you.

[@PEVRidersClub]

Thanks for your kind words 😎👊🏽 are you experiencing wobble while riding your Zero 10X?

[@PEVRidersClub]

Installing a steering damper for the 10X will help you with any wobble. Watch my Steering Damper for Zero 10X intallation video 😊👍🏽

[@ricardoguerrero5440]

@@PEVRidersClub YES, its a shame such a great product seems to have this woobling problem, I say this for I have read other reviews with the same issue. So what is the best way to eliminate it, that would be a very helpful video, since its scary to think that such a fast machine could have its Achilles heel in controlling it.

[@PEVRidersClub]

I love it thank you 😊 for the helpful ideas and comments. You should come hang out with us in our FB group @PEV Riders Club

[@bkanegson]

Have had 52v and now a 60v. Never had any wobble issue at any speed up to the flat out max. Maybe tire pressure is a factor, or maybe suspension adjust, which would alter the angle of the suspension arms/ geometry, relative to the ground. On an EUC, reducing PSI helps relieve wobble, if there is any relation. They don't all wobble necessarily, as mine hasn't yet, knock wood.

[@CKexploresNYC]

Thinking about getting this or wheel locking lug nuts.

[@PEVRidersClub]

Nice! Let us know if you do the locking log nuts how they look 👌

[@rashanedelvalle2018]

Did you use the same bolts when you replace your kickstand? Just ordered a replacement kickstand.but of course no bolts come with it.

[@PEVRidersClub]

Yes my brother! I used same bolts 😎👊🏽

[@rashanedelvalle2018]

@@PEVRidersClub appreciate bro!!😎👊

[@PEVRidersClub]

Any time bro 😎👊🏽 You should come join us on our FB group @PEV Riders Club also and if you haven't subscribed to the channel please do so 😊🙏🏽

[@gilroypro1010]

These fit my zero 11x but they did get scraped when fitting them in by the wheel. Red paint wore off

[@PEVRidersClub]

Yeah they aren't the highest quality BUT so far are the only one that I flame found fit on the Zero Scooters also they saved my rotor once on my Zero 10X.

[@05cesarleo]

Nice side view but a birds eye view would have been nice.

[@PEVRidersClub]

Great idea brother 👍 I will definitely keep that in mind for future videos 🙏 Thank you kindly for the positive criticism 💯

[@jeanpier17]

and what is that for? is it just for scooter esthetic?

[@PEVRidersClub]

It covers helps protect the brake rotors some and asthetics

[@gregoryburkhead7813]

Great video .. I needed this .. do u think I need to put lock nut on the nuts so they won't come loose .. thanks

[@PEVRidersClub]

Do you mean locktie? 🤔

[@gregoryburkhead7813]

@@PEVRidersClub sorry I mean thread lock on the bolts 🔩

[@PEVRidersClub]

No you don't. I hade mine for over a year and never had to replace anything or tighten anything unless I got in an accident of some sort. They stay on pretty well. Please consider subscribing and feel free to joining our community on facebook.com/groups/PEVRidersClub

[@gregoryburkhead7813]

@@PEVRidersClub I will join both .. as I can see u try to answer everyone's question .. I like that ..

[@PEVRidersClub]

Aww thanks bro! I'm just keeping it real 💯 😌 and try to help when I can 👊

[@ChargedWheels]

As if it's that easy to install frsme sliders , just ordered myself front and back ones 😊

[@escooteroslo6014]

Nice video but Does this work on longer bolts?

[@PEVRidersClub]

I have these on 10X and 11X 🤷🏻‍♂️ I would say yes BUT ofcourse depends of the scooter 😊

[@jonvickerson7694]

Great video....does the longer zero 10 stand catch the frame sliders...?

[@PEVRidersClub]

Thanks for you comment. The longer Z10 kickstand actually touches the slider but ever so slightly. Please subscribe to the channel if you haven't my PEV Brother 👊😎🤙#PEVFam

[@jonvickerson7694]

@@PEVRidersClub Thanks for the quick reply...😁

[@PEVRidersClub]

You got it my brother 👊😎🤙Also feel free to come hang out with us PEV heads in our FB group. Facebook.com/Groups/PEVRidersClub

[@ibrahimajau6275]

What tires are you using?? Is that the stock one?

[@PEVRidersClub]

No sir these are the 10x3 hybrid tires 👊😎🤙

[@ibrahimajau6275]

@@PEVRidersClub where can I buy them? Are they suitable for the road?

[@PEVRidersClub]

They are perfect for city riding. Where do you live?

[@ibrahimajau6275]

@@PEVRidersClub I live in the Uk

[@PEVRidersClub]

@@ibrahimajau6275 Than I will contact PET in the UK or direct from AliExpress look for Zero 10X 10x3 Hybrid Tires.

[@billathanasopoulos5540]

Great Vid buddy, Thank you!- Do you have a torque wrench setting for the wheel nuts by any chance?

[@PEVRidersClub]

Hey brother thank you kindly for the comment. I do not own a torque wrench at the moment sorry.

[@billathanasopoulos5540]

Hey Carlos, I found out the torque settings for the wheel nuts. They are 40FT-LBS or 55NM Cheers mate

[@PEVRidersClub]

Great find brother 👏Thank you kindly for sharing that 🙏

[@shilocohen5190]

​@@billathanasopoulos5540f

[@MrRich22]

Will these work on nanrobot d6

[@PEVRidersClub]

Yes they should bro 🤙

[@bakersw0rld847]

Will these work on any scooters

[@PEVRidersClub]

Unfortunately not BUT would work on most scooter with similar axels and swing arms like the Zero 10X. What scooter do you ride?

[@MrRich22]

How did u get the decals on your tire that's C😎😎L it L👀K like a motorcycle tire almost

[@PEVRidersClub]

I painted the letters with a white tire permanent marker 💪😎🤙

[@MrRich22]

That's FL✈️

[@PEVRidersClub]

LOL! Thanks bro 👊

[@PEVRidersClub]

What do you ride my brother⁉️

[@TravelingThruLife]

Really dumb question coming...what’s that tool that you used to remove the nut...I’m obviously not a tools person

[@PEVRidersClub]

Not such thing as a stupid question my brother. Thabks for your comment 👍 I use the 11/16 key / sucket to remove the luck nut 😀🤙🏽#PEV Riders Club

[@TravelingThruLife]

@@PEVRidersClub My meaning is, if I were to search for that tool on amazon...what search phrase would I enter?

[@PEVRidersClub]

Shallow Socket, SAE, 3/8-Inch Drive, 11/16-Inch, 6-Point

[@TravelingThruLife]

Thanks a lot man.

[@PEVRidersClub]

Glad to help my PEV Riding Brother 👊🏽😎

[@caseylgoodrich]

What mirrors did you get? Also have tried to replace the shock in the front I did the back ones.

[@PEVRidersClub]

I got the hefny mirrors on Amazon. Shock wise I am still working on something for the front aswell but being that is 135mm (I hate that) is so hard to find one that fits properly like the rear 165mm.

[@MattyThomas86]

How odd. 11/16 socket doesn’t work with my box. It’s slightly to small

[@PEVRidersClub]

That is odd Matt

[@vipermanx99]

Amazing video bro thanks for the guidance. Just one question do we need a washers between the sliders?

[@vipermanx99]

@@PEVRidersClub thanks for the tip bro

[@PEVRidersClub]

You are most welcome brother

[@scewtersource]

why yu did'nt show use of the sliders ?

[@benjaminm5232]

Where'd you get that nice little lift?

[@PEVRidersClub]

Thanks for your comment 😀👍 Here is a link to where I bought it: www.amazon.com/dp/B01M0AB7MJ/ref=cm_sw_r_cp_apap_Sl3fW5oKQdIAP Please subscribe to our channel if you haven't 😜🤙

[@benjaminm5232]

@@PEVRidersClub Thanks!

[@PEVRidersClub]

You are most welcome 👊😎🤙

[@tedtedsen269]

personally i think the weakest point on the 10x is the steering stem it's too thin and flexes too much in a crash the bodyweight wil bend it

[@PEVRidersClub]

I agree 👍 the post should be stronger although after I purchased and installed the rugged clamp that bending and squeaking went away. What do you ride my PEV brother? Thank you kindly for your comment 🙏

[@JoeyBallzMcBigMe]

I agree, I'm about to order a rugged clamp.

[@PEVRidersClub]

That's great. I think it is a great upgrade for the Zero 10X 💯

[@luisburgos1161]

Te pregunto si tengo el nuevo mudguard de falconpev, también puedo instalar esos? Yo creo que no verdad? Porque no sobra espacio?

[@PEVRidersClub]

No, no caben los dos al mismo tiempo

[@edtuccio4475]

can the 11" tires from the zero 11x fit on the zero 10x? which tires are the best for street ? i have an order in for the 10.3 extra wide tires and will let you know how they do?

[@PEVRidersClub]

Thanks for the comment my riding brother. No the 11X tires won't fit on 10X to my knowledge. The hybrid 10×3 for the 10X are AWESOME!!! 😎👊🏾🛴

[@espaiz]

Hi, I suppose those sliders can be used in any scooter?

[@PEVRidersClub]

No not really, I would say with most scooters similar to the Zero 10X (They didn't fit my son's Zero 9)

[@Studat]

what bag is that on the stem?

[@PEVRidersClub]

It's a Wildman bag (they are awesome and very affordable) amzn.to/2Xgr4CS

[@Studat]

@@PEVRidersClub you had me at affordable 😊

[@PEVRidersClub]

You know it Fam‼️ 😜

[@Schnupp911]

I have a new zero 10x my Axle nuts are 13/16 will these sliders works on mine ? Can you post link to these please

[@PEVRidersClub]

It should fit your Zero 10X for sure 👍 Consider subscribing to our Channel if you haven't thank you kindly our PEV Riding Brother 🙏 Here is a link to the frame sliders: www.amazon.com/dp/B07FLRVWXN/ref=cm_sw_r_cp_apap_Af227HqfilQ2x

[@Schnupp911]

@@PEVRidersClub my bolts are 11/16 it’s a 2020 scooter do you think these will work?

[@PEVRidersClub]

This specific model will IMO as they fit on my 11X also which has HUGE lock nuts.

[@Schnupp911]

Can I send you a pic of what mine look like? Can’t do it here

[@PEVRidersClub]

Bro just join our FB group and we will all love to help you. Facebook.com/groups/PEVRidersClub

[@MegaMrBIGD]

Hey Bro, I really hope you know the answer to this, i've been told it's a good idea to change the shocks on the 11x to air shocks but nobody says which shock you should use, have you any idea which ones would suit the 11x, cheers Bro.

[@PEVRidersClub]

I personally believe if you will go with Air Shocks on the Zero 11X the clear choice are the Monarchs RL 165mm by RockShox. I had replied to this a while back and somehow youtube deleted it (I am a noob on youtube sorry LOL) Thanks for your comment my PEV Riding Brother.

[@MegaMrBIGD]

I don't know why the tube deletes replies, they do it a lot apparently. Anyway thanks for your input, i'll go and check them out now, Cheers Bro.

[@PEVRidersClub]

Cheers to you too bro. Sub to the channel if you haven't yet.

[@MegaMrBIGD]

I forgot to sub, but i'll do it now.

[@PEVRidersClub]

💪😎🤙

[@jonvickerson7694]

Where can I buy these frame sliders..

[@PEVRidersClub]

Search amazon for CNC Frame Sliders brother

[@timcarranza1146]

Hi, what is the size of hex nut of zero 10x? Is it 21mm?

[@PEVRidersClub]

Thanks for your comment 👍 I use the 11/16 key to remove the luck nut 😀🤙🏽#PEV Riders Club

[@donis1984]

21mm, yes works also with 22mm :)

[@brandonhiggs88]

i have the same frame sliders and they saved my zero 10x when I went down at 60kmph

[@brandonhiggs88]

@@PEVRidersClub scooter is ok, I did break a wire to the front motor I had to fix. sliders definitely did there job to the point of bending the rear one. I have handbar sliders as well. I only ride in full motocross gear besides bruises and road rash the scooter and I rode away fine

[@PEVRidersClub]

I am glad brother!

[@genaroortiz8275]

Hi can you please send me where you get those parts thank you installing on the 10 X scooter

[@PEVRidersClub]

I bought them on Amazon look for CNC Frame Sliders

[@genaroortiz8275]

PEV Riders Club You guys are awesome thank you for all your your help and videos

[@PEVRidersClub]

🙏🏽😊 Oh thank you kindly, that means a lot. I love riding with my boy and wife for sure and hoepfully soon group rides 😎🤙🏽

[@pangetsilverio8779]

Where can I buy this one thanks god bless

[@PEVRidersClub]

Amazon or AliExpress just look for CNC frame sliders. Glad bless you too brother 👊😎🤙

[@Jasonlee1278]

are those a tire upgrade as well?

[@PEVRidersClub]

A tire upgrade? What do you mean specifically? I'm sorry

[@Jasonlee1278]

@@PEVRidersClub did you upgade your tires from the stock ones? and if so what size and were did you get them. thanks

[@PEVRidersClub]

Oh yes for sure upgraded to 10x3 hybrids. I purchased them from revrides. revrides.com?sca_ref=99994.9l0rcgxa9V

[@tonyfresh1]

Do you think these can be used on other scooters as well

[@PEVRidersClub]

Yes brother! I have seem them on many models similar to the Zero 10X the only thing you have to check for that your locknut fits and that you have open space on the swing arms. WHAT MODEL DO YOU RIDE?

[@tonyfresh1]

@@PEVRidersClub maike mk8

[@PEVRidersClub]

They will work on the rear BUT not the front of the MK8 because how the front fork is set up. BTW please consider subscribing to the channel if you haven't and come hang out with us on facebook.com/groups/PEVRidersClub.

[@tonyfresh1]

@@PEVRidersClub subscribed brother!

[@PEVRidersClub]

Thank you brother

[@juansalinas3963]

Hola se podra colocar eso en un scooter zero 11x??

[@PEVRidersClub]

Si estos mismos le quedan bien a mi 11X 👊😎🤙

[@juansalinas3963]

Tienes el enlace para comprarlos para mi 11x ? Me lo puedes dar por este medio

[@PEVRidersClub]

Ya los tienes en facebook verdad?

[@juansalinas3963]

Si amigo gracias

[@PEVRidersClub]

Para eso estamos mi hermano 👊😎🤙#PEVFam

[@geemaldonado8617]

Do they fit the d6+ ?

[@PEVRidersClub]

Yep‼️ 👊😜🤙

[@raymondayeung]

What kind of tires are those? They look grippy!

[@raymondayeung]

@@PEVRidersClub These tires? revrides.com/products/zero-10x-wide-road-tire?_pos=2&_sid=c2574b296&_ss=r Do you use the stock 10X tubes?

[@PEVRidersClub]

There it is!!! Yes Sir!!!

[@alejobradley]

Will these fit also for the zero 10?

[@PEVRidersClub]

YES they will! They fit on my wife's Z10. Subscribe to the channel if you haven't 🙏😊 and thank you for your comment, let us know if there is anything else we can help you with .

[@raheemmurray168]

Will they fit the Kaaba wolf warrior

[@PEVRidersClub]

Yes my friend has them on the Wolf King same Frame as Wolf Warrior. The Link for them is on the description 👋😊🤙 Please consider subscribing to our family channel if you haven't yet and also come hang out with us at facebook.com/groups/PEVRidersClub

[@hinhinXng]

Your tire size is?thankyou

[@PEVRidersClub]

Hey my riding brother thanks for the comment 👍 my Zero 10X tires are the Wide Road Tires (10x3.25). Considering liking and subscribing to our young channel 😎🤙🏽🛴🔥

[@hinhinXng]

Sorry I want to ask you one more question🙏🏻how can I fixed errors e09 on 10x? change Controller?

[@PEVRidersClub]

You should visit our FB @PEV Riders Club and ask the question so we can help you better brother.

[@hinhinXng]

PEV Riders Club thank a lot 🙏🏻

[@alfaromeo9762]

Can i also do this in front of my zero 9? Are they all same size?

[@PEVRidersClub]

I haven't attempted to used these on my son's Zero 9 but I believe they should i will try one of these day to see if they fit (my job as been crazy busy the last 3 weeks) I'll let you know 😊👍🏽

[@alfaromeo9762]

Thank you.

[@newtown9952]

Any update for this. Im curious too

[@PEVRidersClub]

Update on what brother? If they fit the Zero 9?

[@newtown9952]

Yeah. Have you tried it on to the zero 9?

[@rsupremexx3971]

do you have a link for those?

[@PEVRidersClub]

Here you go my PEV brother 👊😎🤙 www.amazon.com/dp/B07FLRVWXN/ref=cm_sw_r_cp_apap_MUzFHDyN7oTTf

[@PEVRidersClub]

Here you go my PEV brother 👊😎🤙 www.amazon.com/dp/B07FLRVWXN/ref=cm_sw_r_cp_apap_MUzFHDyN7oTTf

[@rsupremexx3971]

@@PEVRidersClub Thank you! i pulled the trigger and purchased the 10x as an upgrade from zero 9 cant wait to start hooking it up

[@PEVRidersClub]

Yeeaay! I'm glad brother! Please subscribe to the channel if you haven't yet and also you can hangout with us on Facebook also: Facebook.com/groups/PEVRidersClub

[@rsupremexx3971]

@@PEVRidersClub yeah i have, looking forward to your next vids!

[@nicolasvictoriano2849]

Quiero saber dónde lo puedo comprar

[@PEVRidersClub]

Yo los compre en Amazon 😉🤙🏽Gracias por tu comentario 🙏🏽 espero te suscribas 👊🏽

[@TankTheSpank]

Trust me this stuff is irrelevant. I got into an accident with this scooter. The parts that break are the charge ports and the wiring of the LED display. The issue with the charge ports bending it's that it will short itself by touching 2 pins toegther and short the entire battery. Destroying the battery. These sliders don't create a wide enough space to protect those charge ports. Actually you are unlikely to even scratch your side break areas. Since the base of the scooter is wider and when sliding in the floor you are going to destroy your side deck instead.

[@nicolasvictoriano2849]

TankNSpank dónde lo puedo comprar?

[@TheSilverAfro]

Yep, this just happened to me. Slow motion fall at 2kph wrecked the charging port, and shorted the battery. Waiting on replacement port, and praying it will resurrect my 50lb paper weight.

[@PEVRidersClub]

I'm sorry your charging ports took the hit! Brother! I really hope these companies change the position or protect them better.

[@PEVRidersClub]

The sliders aren't meant to protect the ports and yes they need come up with a better way to protect the charging ports

[@TankTheSpank]

@@PEVRidersClub yes the sliders won't protect anything. Actually it's a decoration. (Since it's impossible to scratch from a crash.)

[@TurreTuntematon]

Lol. These are unnecessary.

[@PEVRidersClub]

They are not a necessary per say but they did saved my rotor from bending once BUT ofcourse to each its own IMO is a nice little accessory 👊😎🤙

[@airjordanshow]

very low quality of this shit, I recommend sliders the Spirit Beast company

[@PEVRidersClub]

Do you have a link for those? I have tried 4 kind of sliders and these so far are the only ones that fit without jeopardising the lock nut not seating fully closed (which can lead to an accident). Thank you for you comment brother. #PEVFam #RideSafeRideFreely

[@gilroypro1010]

I actually have a spiritbeast frame slider, just one. Bought one to see if it would fit my turbowheel lightning plus (zero 10x). Forgot about it when I got my turbowheel Phaeton (zero 11x). Quality is amazing. Will be updating later on and will be back with results. Will try it in both of my scooters

[@PEVRidersClub]

Thank you for sharing

[@gilroypro1010]

@@PEVRidersClub Yeah the spirit beast frame slider isn't properly compatible. The zero11x nut and the socket for it does barely fit but the slider leaves a gap between it the nut and where your trying to screw it in. Unsafe. Good News, it will fit the zero 10x. If you want to fingld the spirit beast frame slider, search it up on aliexpress

[@PEVRidersClub]

Oh wow! I'm glad you updated me on that brother. We need more choices on Frame Sliders for our scooters LOL!

[@577buttfan]

These things stick out pretty far so watch out for curbs and stuff..ask me how I know.

[@PEVRidersClub]

I'm sorry if you fell down 😔 I have had sliders on all my scooters for years and so far ok 🤞

[@fuceye]

why did you put your tires on backwards?...the tire arrow indicates the direction of rotation not point to the front of the scooter

[@PEVRidersClub]

Huh? My tires aren't backwards 🤔 thank you for the helpful comment but yeah mine aren't backwards as they are following the rotation of the arrow and forwards tire pattern.

[@fuceye]

@@PEVRidersClub check @ 2:15 of the vid...the arrow is at the bottom pointing to the front of the bike...when wheel turns forward the arrow will be going backwards...sorry brother but you got the tire on backwards...

[@fuceye]

hahhahh. my bad....that is the front wheel. sorry!

[@PEVRidersClub]

LOL! All good my brother 🙏🏽 Thank you for looking out and trying to help a fellow PEV Brother out 😜🤙🏽 #RideSafe