Freightliner Cascadia inter axle differential knock while driving problem broken bearing plate

[@omerbayrak1808]

This mechanic is real mechanic. Any other mechanics will not deal to change or diagnose the bearing problem. They will replace whole part . This guy is good mechanic . Thank you sir.

[@alfonsopayan7982]

Mr Amaya please don't forget to mention the miles on the truck...

[@AndreyBanyuk]

Looks like the fluid was never replaced in the whole lifetime of the truck.

[@familykherson2867]

What about bearing racer inside of this cover ? Bearing racer must spinning ? Or not ?

[@terrellscaife2411]

When you do this repair is there any back lash that needs to be adjusted or just put the cover back on?

[@et9151]

How did you get the bearing on did it need to be pressed on?

[@sergiomacias5491]

Donde tiene su taller para cuando pase por esa area me revise mi camion?

[@martinkazako2292]

Hi Francisco. How you doing? I have 2020 Freightliner Cascadia. When it reaches 60mph it is shaking. Once oil came out from axel seals. I replaced them. Took it to mechanic. He replaced axel inlet and outlet bearings , carrier bearing, bushings, did axel alignment and balance. I did test drive truck was still shaking after 60mph. Then I did drive line balance but it is still shaking. What do you think problem is?

[@erikb7232]

Same here! Did you ever find out the problem? Please let me know.

[@martinkazako2292]

@@erikb7232 The problem is in transmission. The bearing inside the transmission is loose

[@erikb7232]

@@martinkazako2292 was is the throwout bearing on the clutch... I'm at a lose and replacing my clutch now.

[@davidfs.6233]

After changing clutch..stop the problem???iam.having same issues ​@erikb7232

[@tomroberts5512]

I think I have this problem. I've been having trouble determining where the noise is coming from. I've replaced driveshafts, leveling valve, clutch and transmission and still get noise/vibration when accelerating in higher gears

[@erikb7232]

Did you ever find the problem. I am having same issues. Going to change my clutch this week I don't know what else.to do

[@myagmarsukhbatjargal5757]

@@erikb7232 hi what was your problem with noise?

[@erikb7232]

@myagmarsukhbatjargal5757 It almost sounds like the engine brake under a load and accelerating.

[@familykherson2867]

@@erikb7232did you find problem?? What was the issue??

[@erikb7232]

@familykherson2867 no never got to the bottom of the problem ended up getting rid of the truck

[@a-gap4554]

Can a driver cause differencial damaged when he is driving? like touching any button inside truck

[@albertorojas7455]

Buen hallazgo. Buena recomendación. Gracias.

[@nathankelly2796]

How about changing the rear bearing, what would be the easiest way to do that

[@trinidadchacon5447]

Great job, Fransico, were are u located

[@MrJogeejatt]

Where is your shop in fontana ....

[@seahorsebombolulu3534]

Where is your shop?

[@abdirizaqfarah5370]

Hellow I have 2005 frghtliner I hear a grinding noise coming from the stick shiffter I changed the carrier bearing.

[@farrukhtadjiev9267]

did you fixed. did you mean fork shifter

[@davidfs.6233]

How to adjust the seal,

[@mehariweldai3176]

Hi Francisco I have problems with 2016 freightliner cascadia starter keep burning I change 4 starter so far with in 2 months. While I’m driving I feel lose power ( gear coming back with in second .. can you help me with this problem

[@Wazlonestar]

Where is your shop located ?

[@alex7289]

My inter axle diff got stuck on the lock position even though that it was in unlock position in the dash. Didn't make it 2 weeks until it destroyed everything inside.

[@Bigola]

I just got the problem today. The button is unlock position but the light indicator is on

[@alex7289]

@@Bigola Try moving the truck forward to a flat ground and lock it then unlock again. I used to work delivering pups to residential homes and churches. A lot of it involve being on dirt and uneven ground surfaces so I did use it a lot when I delivered. One time I caught that it was still engaged on a different truck when I was on the interstate and I saw my 2nd axle temps were higher than normal, like 50 degrees above normal. I pulled over and lock it and unlocked it again. Started driving and they went back down in a few minutes. If you have axle temps gauges you could keep an eye on that. I remembering costing around $2-3k for that repair because my differential was completely destroyed and that was a used one because they couldn’t get a new one anywhere at the time. Good luck.

[@Bigola]

@@alex7289 thank you so much. I did what you said and the light indicator disappear.

[@MuhammadQasim-cj5cc]

Damion Hadsome Brown 2018 freightliner Cascadia I think it's not diff this knock come when i start moving and realize the accelerate suddenly if keep moving do not realize the accelerater then there is no knock come even I realize the accelerater smoothly sometimes the knock sound not come

[@TruckingPerfected2]

Hey, did you find out what the issue is? Thanks.

[@vickymultani8446]

I have 2013 cascadia my Truck show code 2791 fail 14 all def system reinstall new but my Truck go on road check engine light on and lose power 10 second to50 second,I already aculator two time change give me a suggestion please

[@CHCH-yu5gd]

What's the cause of this ?

[@harjitaulakh7728]

Hi I have international prostar 2016 16 speed+R& L I hear click noise when shifting only 9 to 11th gear. Other all gear shifts good and now start noise like abusing when speed going to 90km/h to 100km/h Thanks

[@farrukhtadjiev9267]

did you find problem

[@muhas1234]

Francisco, please respond. Last night when I was backing up I felt like I hit something like a brick wall, I went outside and looked and there was nothing. I move forward then back again and it happened again. All of a sudden it showed dashes instead of gears. So I had a hard time bringing it back to neutral. What can that be?

[@franciscoamayaYT]

Seems like there is clutch malfuntion or there was a internal transmission fail

[@luisvalencci2990]

Disculpe donde tiene su taller

[@abdirizaqfarah5370]

Thank you for the videos

[@jamshidmahmud1008]

Where is ur location I mean shop ???

[@mehmetdurmaz2974]

My 2020 cascadia had the same problem. 400k miles on it. Utah freightliner dealer replaced whole 1st axel differential assembly.

[@martinkazako2292]

Hi. Can you explain more? I have 2020 Freightliner Cascadia too. And when I drive 60-70 mph it is shaking. I did everything about suspension and balance and alignment of axels, driveshaft. But it is still shaking. I think I am gonna open 1st axel. Please explain more how it was. Was your truck shaking. Teşekkürler!

[@farrukhtadjiev9267]

​@martinkazako2292 did you find problem. I have same problem.

[@alexandertakele6136]

Do you work on Volvo d13 engine?

[@terryj-londonontariocanada4605]

Very informative, it looks like a failure due to a complete lack of maintenance, no reason why differentials should not go over 1 million miles minimum with proper maintenance.

[@gumerdominguez4091]

Guys chance the dif oil every year sintetíc ,,,, plZ don’t mix synthetic and non synthetic

[@moonlight2373]

whats dif

[@rrubio3608]

@@moonlight2373 differential oil

[@2001nyjeff]

How does this Differential lock in or out

[@atabeymedia5364]

This problem has happen to me to a freightliner 2021 and the mechanic from the dealership of the truck is saying their has to be a differential repair

[@solidgoldeazyaction]

The tool to remove and install piston is very expensive, the old style was alot quicker replace

[@Armannortheast]

I have same problem

[@surinderpalsingh4284]

I like

[@glackaglack1534]

Wow that's messed up

[@jonathanmorales2687]

Hi

[@jenarojuarez1993]

🤔

[@rosahuerta8960]

Espań