I use my holbrook b13 lathe to friction weld There are loud noises at some parts
Пікірлер: 31
@joeycoston76923 жыл бұрын
I like how he's like, "Weld complete! Video over!" Where's the result testing? 😭 How good was the weld?
@turkyun5 жыл бұрын
Nice welding machine ;)
@skylerbrownfield26337 жыл бұрын
faster is always better when friction welding
@skylerbrownfield26337 жыл бұрын
when i friction weld polly fittings on water tanks the speed is around 3600rpm. i did this for 3 years with much success.
@okunew7 жыл бұрын
nice video.
@riteshpahladsingh38194 жыл бұрын
Good job, try heating up the welding surfaces with a cutting torch, should work better, since a lathe is not designed for friction welding.
@dadandsonsworkshop7 жыл бұрын
Frayed sleeves while working on a lathe? Please don't wear sleeves on a lathe if you want to keep your arms.
@wtfjpgmailcom7 жыл бұрын
CNC Guns i was thinking the same thing if it caught his sleeve good night ireen
@sharpx7777 жыл бұрын
did you crack the tailstock quill?
@Grushnerd7 жыл бұрын
If that's oil for coolant and it looked like oil good luck, it's everywhere and u have bright hot metal next to it you're going to burn the shop down
@JakeAvatar17 жыл бұрын
Holy lack of safety... wrenches left on machine, long loose fitting sleeves, my guess is the oil has a low flash point and will light up real easily.
@danhard84405 жыл бұрын
don't forget the cardboard to catch the molten pieces of metal haa haaa
@jirehhundeby54992 жыл бұрын
don't worry it is cut half and half with diesel to keep it flowing in the winter
@christianheidt5733 Жыл бұрын
Poor lathe 😓
@Phantom-mk4kp Жыл бұрын
Poor headstock bearings. Circa $2000 for my Colchester
@jackcaldwell4857 жыл бұрын
If you had heated up the metals before you tryed this would help you get the bonding you was wishing for
@tjd23263 жыл бұрын
I have a feeling theres alot more pressure involved in actual friction welding
@davidut553 жыл бұрын
Not as easy as they make it look! Ha ha. Not even a lathe can do it!
@erickalex4387 жыл бұрын
Holding with tailstock not so good cus tailstock have play, also it need a good forse in order for metal to metal bond, easy 1or 2 tons of force on big pcs.
@tylerhensley23127 жыл бұрын
Oh I feel bad for that tail stock!
@tjrhdeg62667 жыл бұрын
That's some serious heat transfer on the jaws isn't it? Isn't there a concern of damaging them ?
@KimberlyRPeacock7 жыл бұрын
You rock!!!
@tylerstone68467 жыл бұрын
Hey Jireh it's Tyler. This video showed up in my recommended videos. The internet is a small place, huh.
@danhard84405 жыл бұрын
you would have better luck not using 90 degree angle 85 or 80 would have worked better
@steveallen54967 жыл бұрын
What is the coolant used motor oil?
@jirehhundeby54992 жыл бұрын
motor oil and diesel so it doesn't freeze during the winter