Frigidaire Washer Repair - Does Not Go Into High-Speed Spin

Frigidaire Washer Repair - Does Not Go Into High-Speed Spin - Door lock

Рет қаралды 298,480

11 жыл бұрын

This video shows you how to Repair a BMZDFE443S0W Frigidaire Washer 131763202 Door lock
Symptoms may include: Does Not Go Into High-Speed Spin or Will not spin out completely, No spin
View this video on our site: www.appliancevideo.com/frigid...
This Frigidaire repair could apply to multiple brands: such as Frigidaire, Electrolux, Tappan, Kelvinator and Gibson
ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancevideo.com
If we helped you, please support us and Subscribe to our channel!
kzbin.info...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com/paypalme/appli...

Пікірлер: 80

@ehcasey70 Жыл бұрын

Thank you for an awesome video that helped me get my Frigidaire Affinity front-loader washer running correctly again. It was not going into spin cycle and your video helped me troubleshoot it and fix it. I'm an avid DIYer

@ritahanes2835 3 жыл бұрын

Thank you so much @ my dear husband passed suddenly 1 year and half ago! He was so good at fixing things@ your video taught me how to do this myself on Thanksgiving 2020@ he would be saying Ok fine. God Bless you

@Appliancevideo 3 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

@RGeoffBaker 2 жыл бұрын

The problem pictured is 'no spin at all' not 'no high speed spin' -- waste my time because title/description is inaccurate.

@HillDental 10 жыл бұрын

Thank you so much for showing so clearly how to replace the door latch assembly. I called the Frigidaire Company and they had me to press Start and Cancel buttons at the same time on my front load washer and hold. It brought up the error code which told them that it was the door latch assembly. I was able to replace it myself, and saved a lot of money. Thank you!

@Appliancevideo 10 жыл бұрын

Sue We are glad you saved money doing it yourself. Good Job. Thank you for your positive comment. Please help our ranking by subscribing to our KZbin page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians and help people like you. We also have our technicians daily emailing professional advice to people that have problems with their appliances. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.

@milirotar 9 жыл бұрын

***** I have the same washer and is not do the final spinning . I have cleaned the water pump and the filter. The pump is draining the water for final spin but the drum doesn't move. I cam here the pump working and see the water dreaming. Any ideas please?

@alexischarles4459 9 жыл бұрын

Mihaela Rotariu

@knowmad428 2 жыл бұрын

@@milirotar I wish you got a reply on this because this is the problem I have right now.

@johnnybellamy3855 2 жыл бұрын

That’s the same problem I have. I’ll follow these steps n get a new switch. Thanks for the help.

@wf9338 2 жыл бұрын

Thanks for the video. Easy fix. My Kenmore machine wouldn't go into high speed spin to finish the washing load. A new door lock fixed the problem.

@Appliancevideo 2 жыл бұрын

@acknickulus 8 жыл бұрын

Just replaced my door lock , works like a charm. Thanks!

@Appliancevideo 8 жыл бұрын

+acknickulus Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our KZbin page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

@kimdarnell9919 2 жыл бұрын

Thank you!! This video saved me some $$

@jenniferrosoff9456 10 жыл бұрын

I might have got gouged for the part at $73, but worked like a champ.

@Appliancevideo 10 жыл бұрын

Jennifer Great job, I am glad that it worked for you. $73 is allot better than $150 in labor to do this job. Please help us provide more videos to our site by subscribing to our KZbin page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.

@debbiecase6710 3 жыл бұрын

Thank you so much!!!! You rock!!!

@Appliancevideo 3 жыл бұрын

@halinachrzaszcz7739 3 жыл бұрын

We did it ! Thank You !

@Appliancevideo 3 жыл бұрын

@ClaremontClassicGarage Жыл бұрын

Thank you!!!!

@albinogarza108 2 жыл бұрын

I have checked my door lock, water discharge pump as well as for any clogs but cant get my Frigidaire affinity washer to go into high speed, help please

@cg3810 2 жыл бұрын

Why did the door lock when you switched to drain and spin cycle?

@Appliancevideo 2 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

@maryrobertson6772 8 жыл бұрын

I ohm'd the wax motor and got OPEN. I jump-wired it with 120v and it heated up but no movement. I replaced the lock assembly and nothing changed. I ohm'd the drive motor and got 4.6 on all the windings and about 190 on the tachometer wires. I didn't check for shorts on the windings, so that's next. When I touched the motor to see if it was hot I got a mild shock. Would that suggest a faulty motor speed control-board? that is the next thing I'm looking at. -c. This has a mechanical timer, and I recall when I advanced it no water was coming in so I will have to re-check the cycles when I go back first of all. (Maybe a delay before the valves open?)

@Appliancevideo 8 жыл бұрын

+Mary Robertson Good question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website www.appliancevideo.com/repair-help/ . We also have over 30000 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE.

@rekesharayfield1605 7 жыл бұрын

ApplianceVideo.com

@habthree 10 жыл бұрын

Side note... KZbin users make sure you comment and like if you have found the video useful

@Appliancevideo 4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

@laurabishop2432 2 жыл бұрын

So if the door lock shows locked throughout the whole thing but the final spin won’t happen. Is it still Worth changing out the door lock? My drain pump kicks on and works great. I’ve tried the drain/spin cycle and it says it takes 13 minutes it will drain and then just click off but never spin taking all of a couple minutes to run through it’s 13 minute cycle. Any suggestions?

@tjbeckk2 15 күн бұрын

I’m having the same issue. Anyone have any insights?

@carolynmancino813 8 жыл бұрын

Ok my problem may or may not be the door lock, here is what I've tried and the last spin cycle doesn't spin no matter what spin setting I have it on from slow to max: I turn on for normal wash it fills and spins, I hit cancel turn to spin only and the water drains out fine and quickly, the lock door light is on this whole time but it will not spin.......could this still be the door lock or could it possibly be a bad spring or shock even though the machine doesn't make any unusual noises rattling or anything....It spins during wash and rinse just not the last final spin no matter the spin setting??? Thanks in advance for any help you can offer.

@Appliancevideo 8 жыл бұрын

+Carolyn Mancino We would like to help you answer your question. With our videos now getting over 900,000 views per month and hundreds of questions from people like you, our technicians are now answering questions at our website www.appliancevideo.com/repair-help/ . We also have over 2200 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE. You also have the option to email a factory service technician with a question on your appliance at www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you can also search our library of over 2600 free repair videos. ApplianceVideo.com specializes in quality DO-IT-YOURSELF appliance repair videos and we get over 800,000 views per MONTH to our videos worldwide and growing. If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks for your support. Matt Ace Appliance factory service technician.

@carolynmancino813 8 жыл бұрын

I've searched and finding no exact answer or questions same as my problem

@sassjelly3233 7 жыл бұрын

Hi Carolyn, just curious did you figure out what the problem was? I just replaced the lock and strike on my frigidaire affinity washer only to find that it not longer performs spinning during the drain/spin cycle, although door lock light remains on and door cannot be manually opened. What was the repair and how much did it cost? Thanks.

@jamesabarela 5 жыл бұрын

I have a similar washing machine (only difference are knobs) and mine will turn on, door locks, you can hear the pump kick on and start draining. But after 5 to 10 seconds with no drum spin at all, machine just turns off... Any ideas on problem?

@Appliancevideo 5 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

@Blark3 5 жыл бұрын

Similar problem but will work without issue if there aren't any cloths in the machine. If I put a very light load in, it will not spin at all. It will do a light agitation but stops. Same washer.

@Appliancevideo 5 жыл бұрын

@sassjelly3233 7 жыл бұрын

Door can remain locked and light is lit, but door lock may not signal as locked to control panel to allow entry into high speed spin. I purchased an ebay door lock for $25 and washer tumbled but did not enter spin, although door was lit and remain locked. As this ebay part appeared used, I then purchased a factory sealed product for $50 and door and light were locked and washer entered high speed spin, without a problem.

@Appliancevideo 7 жыл бұрын

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

@YC-hc1cw 7 жыл бұрын

ApplianceVideo.com

@josephalmeida8892 6 жыл бұрын

I have a front loader it spins but it doesn’t go into High spin. What could be the cause ? It’s a whirlpool

@grapenehiyello 4 жыл бұрын

Mine won’t go into high speed spin but the problem is neither the lock or the control board. I can get it to high speed spin only in diagnostic mode and when it does, it’s extremely out of balance. I can’t seem to find any info online re fixing this. I know some washers have springs or rods to balance the drum but have no idea where to check on this model.

@Appliancevideo 4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

@cherylnjohn7587 Жыл бұрын

I have this same washer I replaced the door lock and now when I plug it back in all it does is go straight to no spin option and sounds like it is trying to drain then shuts off

@PaulReedy 9 жыл бұрын

Mine is not showing an issue with door lock. If I put it in drain/spin, it'll drain, but the tub will not move. I was able to run the diagnostic by setting the dial to drain/spin, holding control/cancel for a few seconds, and then turning the dial to Delicate, which the unit then ran through the full drain/spin test, however, when it was done, it displayed E43 which is listed as "Control Board problem", with a resolution of "Replace the control board". Is there anything else that would cause an E43, or am I looking at replacing the control board?

@Appliancevideo 9 жыл бұрын

Paul All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician

@babyfyrefly 9 жыл бұрын

I was getting the same issue. I almost spent the $130 for the control board for mine, but I decided to check the debris trap. That thing was clogged up so bad even water couldn't drip through! After cleaning the trap, it works perfectly!

@babyfyrefly 9 жыл бұрын

Btw, mine sounded like it was draining, but it wasn't.

@chkl3303 Жыл бұрын

Hi, what did you end up doing ? I'm here E23 also control panel. Is it easy to change ?

@MGShortcake 6 жыл бұрын

My lights lite up but it says it's on final spin. It won't start at all. The start light blinks and I'm able to open the door. My husband is out of town for two weeks. With three kids I need to get this fixed ASAP. FYI my washer looks almost identical but it's Kenmore,

@Appliancevideo 6 жыл бұрын

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.

@fernandoricketts3756 3 жыл бұрын

i has front loader vibration guard washer its not going in to spin dry cycle it just make beep noise and shout down

@Appliancevideo 3 жыл бұрын

@milirotar 9 жыл бұрын

My washer doesn't work on high spin. I sow the video with the door lock. Is not the case on main. I cleaned the filter and the pomp. The pomp is draing th water but for the final spin and the drum is not spinning. You have any idea what to do ?

@Appliancevideo 9 жыл бұрын

Mihaela All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at www.appliancevideo.com/premium-membership/. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

@alexischarles4459 9 жыл бұрын

Mihaela Rotariu

@delorissylvester6747 7 жыл бұрын

ApplianceVideo.com

@netad9023 5 жыл бұрын

@@Appliancevideo trying to replace a computer board forfull size stackable Frigidaire washer and dryer the washer will do everything sell it gets too high spin and then it shuts off and we need to know how to replace the Powerball numbers result 001723106

@Bm6463 3 жыл бұрын

What if replacing it doesn't fix the drain and spin cycle. And if you think the drain pump dirty stuck or broken that doesn't make any sense because it drains and spins in the wash cycle. Also there a video to drain and spin when it won't do it on its own. That works but I'm not doing that every time. So to fix do you think the new door lock is faulty and order another one or something else?

@Appliancevideo 3 жыл бұрын

@Naedlj 3 жыл бұрын

I replaced the latch, cleaned out the drain and checked the belt (which seems fine) and my washer is still not entering the high speed spin cycle… any tips because I’m drawing a blank and the only repairman in my area won’t be able to come by for months.

@Appliancevideo 3 жыл бұрын

@tatoc2238 6 жыл бұрын

Hi I replaced the switch and it still stays in draining mode it spins but not fast enough

@Appliancevideo 6 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

@MichaelBurris5773 7 жыл бұрын

i am lost with my washer, MHWE550WR00. It works fine other then high speed spin, it had the door lock code come up, replaced that, same issue. It thinks there is water still in the machine and keeps trying to drain. Replaced the pressure switch, same issue. Ran the diagnostic, when into high spin....I dont get it.

@Appliancevideo 4 жыл бұрын

@jasonthrills2478 4 жыл бұрын

way easier to remove the top panel and access it from the top... that tub seal is real pain to put back on

@Appliancevideo 4 жыл бұрын

@z28trance 3 жыл бұрын

I put new door lock and still won’t final spin ??! Drains with no issues

@Appliancevideo 3 жыл бұрын

@ariesuecanfvfdayandassocia5845 5 жыл бұрын

how to take control lock off

@Appliancevideo 5 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

@sipmeister3611 Жыл бұрын

My door lock is fine it’s just not entering a high speed spin. Just a couple flips back and forth then shuts off.

@pedroneil2054 4 жыл бұрын

Mine not door lock it is fine won’t go in max spin this video didn’t show me anything just says email or text their appliance tech wth ?

@Appliancevideo 4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

@mightycoldham7897 2 жыл бұрын

unplug it first!

@JasonPhipps 9 ай бұрын

Prior to 1:10, the machine sensed the door was locked. Then, you edit to another clip after you didn't show yourself pushing the cancel button and open the door and claim that shouldn't happen... You steered the fix! There's no indication from this video that the door lock was the actual problem. The drum won't rotate at all with the door lock being faulty! This is a misleading video, and that's a scummy move for someone trying to help people. The entire premise of this video is a lie. That washer works just fine and you wanted to demonstrate how to swap the latch out. That's it. Doesn't help me at all. Then you claim that before, you had absolutely no drum rotation whatsoever at 6:09 (see 2:26). Absolutely the worst waste of time, this video, as I'm trying to fix mine! Nothing was ever wrong with this washer.