From Lawn Mower to 450.. This CRF250F Exhaust BARKS

[@scottarmstrong8717]

Nice dude! BTW - HyperLite Moto is offering a newer version of the Easy Clutch Pull Kit that Anker redesigned to accommodate aftermarket exhausts like Belparts, etc. It replaces the right rear motor mount bracket and tucks in tight to allow for the header to pass by. Will get some coming your way...

[@AdventureDaily]

Thanks for the info! Happy to hear that.

[@BigMoneyButters]

Should send him some crank case breather kits too

[@devanparie9685]

That same exhaust is 99 bucks on Amazon js man 399 is hella marked up ​@AdventureDaily

[@brianrogers1907]

You didnt want to go with the Yoshi or fmf?​@AdventureDaily

[@chadrichardson3007]

That smile once it was turned over says it all! Had the same feeling installing my Yoshimura on my 250F. Good stuff!

[@RealSuburbanCowboy]

I love that you clean your stuff as you are taking apart/before you put it back together. It makes me crazy when I see people put stuff back together dirty. Di-electric grease can actually keep connections from working if you get too much in there. It is non conducting. 2 thumbs up. Great video.

[@jarrod1687]

I love that you have owned and ridden a lot more premium high performance bikes yet you get excited about your 250f

[@J_prath]

250F content is why I am here hahah

[@AdventureDaily]

Love to hear it!

[@airindiana]

I’ve just got an FE250 with one of those FMF 4.1s. Damn thing sounds like an old V8 TransAm when you rev it. It’s pretty cool after mt 2 stroke have to admit lol

[@wherewithalmoto]

That smile when you first started it said it all! Sounds sick!

[@hoggydo]

Always a pleasure to get a notification of a new video from you Tanner! Best wishes and safe riding from all of us 🇬🇧 fans

[@urbexcross]

hell yeah. Was going to potentially help my girlfriend put an exhaust on her 2024 250F, this vid will help me prep for what's under those plastics.

[@JackBlackstone-ny3iy]

I did the same Mods to my 23'. Along with many more. Scott is a really good friend of mine here in Vermont. Absolutely love this Bike.

[@frasermacmannis614]

Love my Bruce suspension, but I do enjoy being a little more low key in areas so going to stick to stock for the exhaust!

[@ohwell2790]

Good idea, loud bikes everywhere are getting areas shut down to ridders who enjoy the out doors. Really do not need to piss people off who go there for the quite. But, seems some people just do not care and then complain about areas getting closed.

[@sircadenalot]

Scott with HyperLite Moto got me all set up with the Exhaust, Intake and EJK! Thank you Tanner for all the great videos and instruction!! I absolutely love this bike and both of you have made the experience even better! Keep up the great work!

[@mofo1rey]

Thanks for the DIY! Will be doing this mod in the near future with my 2024 250F. Great content as usual!

[@AdventureDaily]

Thanks for watching, I hope you enjoy it!

[@rcwildman9255]

So glad you did this upgrade! By far the best video of this exhaust period!

[@About23Goats]

Excellent install/how to video! Very detailed explanation

[@AdventureDaily]

Thank you!!

[@R.B_B]

Nice to see a good Brazilian exhaust system. We have lot of good and cost-effective performance parts

[@vincedaugherty9687]

Nice work. I was curious about the Belparts as i dont like loud exhaust either. Prob go Yosh when i get around to it. I did my own airbox mod and chipped away the epoxy that secures the screen. That opening is bigger but the intake boot is not so i didn't think it really gained much. Plus i didn't want to be tied to that air filter because 10 years down the road might not be able to get it. Will always be able to get stock filter. Just my two cents. Good video bro

[@zachroberts1988]

I put that exhaust on my 250f last summer! absolutely love it!

[@mschumaker1]

nice work man your channel has come a long way, great camera and editing work

[@AdventureDaily]

Thanks a ton!

[@c0ck_l2oach75]

Agreed. Well done brother.

[@quickguesswho]

More Alexis vids please. She is more my height and experience level so connects with that a lot. Plus currently have XTrainer and a CRF250F.

[@therealrealshocker]

Alexis is amazing! I wish I could clone her 😝

[@2vford241]

Sickest 250f on KZbin! A vid on getting black rims on it would be sweet

[@AdventureDaily]

Thank you!! Still have a long list of stuff to do.

[@jamesbillings592]

Did the same to my 22 it’s gonna be a completely different bike for you now. Can’t wait to see the next video!🤙

[@elite-mxrcy]

Does it sound good thinking bout buying one

[@MacFromUrbexCross]

Awesome install video!

[@alehorns]

I love watch this type of videos, I so close to get a new bike (first bike actually) and im so anxious to modify it, it’s not a CRF but in shape its similar 😅 don’t stop the content. Greetings from Venezuela 🇻🇪 ❤

[@Bill-es8ds]

You definitely can tell it has more bark with that spark arrester removed, Awesome job! The air box mod,looks like the one on the kdx200 stock cover. Idn, if yours still has that on it. Sometimes people toss that cover. I have a 95 kdx 200 and it’s on it. Can’t wait to see how she does on the hills u guys ride on. Love your videos, keep them coming.👍✌️

[@singletrackjunkie488]

It’s fuel injected. No jetting.

[@dirtbikeheaven1129]

Thanks for the video. It’s not something I would do. My days of loud bikes are over. I’ll stick with Bruce’s suspension and HMoto lift kit. All of that does look like it would up the performance. I’ll look forward to seeing how it works in the real world.

[@05rickie]

I purchased this CRF250F in 2019 when it first came out,at 265 pounds it is a PIG,especially when you have to pick it up off the ground,I tore my bicep tendon and had to have it surgically repaired,just trying to pick this pig up off the ground. I sold it after that,I owned it for six months.It may not feel heavy when sitting on it or even riding it,try picking it up off the ground.

[@billcotton1551]

I looks great,and sounds great. Love that airbox mod.

[@AdventureDaily]

Thank you Bill! I always appreciate the feedback.

[@raoppacheco7654]

I want to see the results, waiting for the next video😅

[@jimbo4203]

I'm a FMF guy but that pipe looked and sounded good , and a little loud 😊

[@justincarlfilms]

Looks sick sounds, sicks. I'm like, you be cool to see the numbers on dyno, and your reactions was golden, lol

[@motoshark5847]

Ill stick with stealth mode.

[@justinthompson5038]

I was able to do the air box Performance kit with out taking the air box out but if your doing the ejk you got to take most of it off any way think about doing the ejk and exhaust next thank for the videos

[@ThatGuy-771]

Makes ya smile brother! Lol heck yea. 310 Rally Bore next and keep it? I’ve been interested to get my hands on a dyno for mine too. Awesome as usual 🤙

[@AdventureDaily]

It does sound good! I’ll have to research the reliability or wait until you beat the piss out of yours to see haha. Thanks for watching👊🏻

[@ThatGuy-771]

@@AdventureDaily hahah I’ll work on beating the piss out of it for sure and keep ya posted brother! 👊

[@nickbragdon9963]

I think it sounds great! Im curious of your opinion of how much power you feel like you gained out it. 10-20% more?

[@Rafael_Barato]

BelParts, hell yeah. Brazilian pride.

[@SelvinMata]

Your work is very professional, I admire you Adventure Daily. I have a question: to install a Yoshimura muffler on my CRF250F, do I also have to put in those electronic parts?

[@gabriellarouche3702]

Nice video thanks, if only there was a video for the 4win kit, the design was kinda shit and destroy my air box had to buy oem air box to put all back stock. This kit look way easy to install and better desing.

[@usmc03]

Better stock up on that proprietary air filter, thats from Brazil....while you still can.

[@TK-cl1jm]

Fantastic video, and content in general! I have been waffling back and forth trying to decide if a 300L or 250F should be in my future. Your videos helped push me over the edge to the 250F! Subscribed! I will definitely be getting the EJK. The quandary will be in deciding on which exhaust system, if any, to go for. I'm like you, I prefer quiet. Do you have thoughts on a good option that is low-restriction AND lower dB? Cheers from Vermont, only 12 more weeks until Spring!! 🤔🥶

[@Korben.Dallas]

Awesome video Tanner! Quick question, any reason for going with this one over the Viola Racing Exhaust?

[@willcomn1919]

My dream bike

[@stubabyfuora5280]

Dry filter off with paper towels to eliminate excess

[@DOGMEN1969]

More 250F content PLEASE

[@dont3761]

Yukon Cornelius does pipe install....lol , cool video

[@AdventureDaily]

I’ve gotten that several times now😂

[@glennminser2279]

Good stuff. Thanks much !!

[@McTurnups]

Does this kit fit a 2024 250F? Sounds amazing!!

[@AdventureDaily]

Sure does!

[@GustavoCastro15]

Is it strictly necessary to put the EJK when buying the performance filter and the exhaust?

[@sagenbabin8786]

I got this pipe on my 2001 wr250f it sounds wicked

[@iam5564]

i might have to get one of these for my 250f, i've been looking for exhausts for a while now and most are always out of stock

[@DannySpins]

Sounds great!

[@someoneyouknow96]

I would have been curious what it sounded like with just the air box mods.

[@AdventureDaily]

Yeah I bet you could hear more air than exhaust!

[@someoneyouknow96]

@@AdventureDaily you're probably right. That thing was quiet (exhaust) stock. It sounds proper now. On video it didn't seem too loud. Just louder like an MX bike.

[@vegasranger]

How much horsepower have u gained with the new exhaust?

[@Mr.WS6]

Where is the built 450L? I wanna see what that bike can do built with new ecm, pipe, etc. 😊

[@kipirvin3462]

Any concerns about an airbox fire or is that a carburetor bike concerns? Did Scott mention anything?

[@STEN-164]

Do you have to do the airbox mod if you get the aftermarket exhaust?

[@kuladeeluxe]

Had a loud FMF exhaust on my WR250R. no real gain other than louder. I would not do that to a plonker like the 250F that has such a sweet motor.

[@TK-cl1jm]

What are you using to clean with in that spray bottle?

[@Workerbee-zy5nx]

Wanna race? Head banging mx. I'll fetch my old 89 250r, lets go.

[@STEN-164]

Do you need the tuner for the exhaust? Or can you just throw on the exhaust (without losing performance from stock)

[@AdventureDaily]

No but you won't see much of a power difference, will probably be worse off especially if you don't do the air box mod.

[@iam5564]

could you do a db test with/without the spark arrestor?

[@reecethompson2098]

I have my 2024 crf 250f plastics that I don't need anymore, you should take them off me!

[@AdventureDaily]

send me a DM on instagram @advdaily or email me [e-mail] , I'd be stoked to have them, I love the new look!

[@CashOsterman]

Does the 5 speed transmission slow it down top speed wise?/ do you wish it had another gear?

[@AdventureDaily]

If this bike had 6 speeds it would be the definition of perfection.. It's a bummer for sure but still doable for cruising around 60 mph.

[@fitphilosopherking]

Sounds good! When dyno??? 😂

[@SupercellCuentaAleatoruado]

Ese escape es el mejor T-6 que hay

[@mclarencraze7373]

Thought you sold it saw it on marketplace?

[@BigMoneyButters]

would you ever consider a big bore kit from force cam? that guy 771 has a few videos on it, it seems pretty nice i think thats going to be my next upgrade considering i got the yoshi yesterday

[@AdventureDaily]

I have watched several of his videos about it! Maybe someday.

[@ThatGuy-771]

@@AdventureDailyheck your one of the reasons I added this bike to the stash a year ago brother! Got a long way to go to hit your quality! Love the videos brother! So much love and respect!

[@bvanderveen]

How many decibels is this setup?

[@ardaunal1875]

What did you use to clean the inside of the airbox

[@lindellsiler5994]

I'm no expert but the one experience I had with cutting out the screen wasn't great. Lots of popping/stalling. This was on a 84 xr500 so it may or may not apply. Thanks.

[@AdventureDaily]

Thanks for sharing!! Seems to be running great so far.

[@aidancampbell2656]

I think it sounds better with spark arrestor honestly

[@prezzzrock]

What spray cleaner are you using?

[@Spartan375X]

It's impossible for me to get the spark screen for my FMF Q4, keep us updated on that Fischer screen, I'm thinking about getting it, it's just a bit pricey to me.

[@AdventureDaily]

Dang that’s a bummer! I’m happy with it, even thought about drilling and tapping a hole to hard mount it but it seems solid for now.

[@3wheelslifelonglivetheatc559]

Dude I want to get this exhaust for my crf230 seen in on ebay

[@machetekiddtv]

🙌🏼🙌🏼

[@woods702]

Where did you get that tail light kit i need that for mine

[@alejandromunoz1773]

Nice!

[@machetesulaco]

Did you change the seat of your CRF? I just bought my bike but the sit is not comfortable

[@elite-mxrcy]

Mine was the same way had to break it in good just ride it plenty and it will get better trust me

[@cody5495]

Yeah man let's boost the performance of this air-cooled bike and have it run hotter sounds like a great idea!

[@AdventureDaily]

You must be slow if you think letting it breathe better and get rid of hot air faster is going to raise engine temps😂

[@cgaddy17]

I wanna get that exhaust so bad

[@AdventureDaily]

It's a unit!

[@cgaddy17]

@@AdventureDaily I wanna build my 2024 crf 250f what do you suggest I should do to it

[@AdventureDaily]

What kind of riding do you like to do? @@cgaddy17

[@cforcemx9869]

Shouldn’t you let the air filter dry after dunking it in oil or is that not necessary?

[@AdventureDaily]

Oil doesn't dry, that's the point! Keep it nice and tacky for all of the dirt and dust to stick to.

[@shakenbake8829]

I cut my baffle in half when I bout my bike they didn’t really have any aftermarket things

[@Mt24855]

Just got an AliExpress exhaust for mine 😂 wouldn't recommend those air filters tho IV seen horror stories of them failing to filter anything

[@ZanderSteele]

Nice

[@AdventureDaily]

Thanks

[@joshuaguidry6428]

It would’ve been cool to do GPS 0 to 50 run before and after

[@AdventureDaily]

We can do it with Alexis’s bike!

[@Joebauers2505]

Surprised you didn't go with a Yoshi

[@AdventureDaily]

Gotta support my Brazilians who actually care about this bike!

[@Joebauers2505]

@@AdventureDaily I think the yoshi has a better sound but cant beat the results and price of the belparts prob why i already ordered one just waiting for it to come.

[@spidey3759]

Would this work on a drz 125l?

[@ziekezang]

That’s just water and dish soap in the spray bottle?

[@AdventureDaily]

Correct👍🏻

[@jeremyclarkson-69]

I really think honda should make a crf450f i would buy it just swap a yoshimura in there and have 250r power with post apocalyptic reliability

[@airadaimagery692]

Honda doesn’t have a 300F yet?

[@AdventureDaily]

That would be sweet but unlikely, this bike will stay the same for years

[@Motolympics]

💥📢

[@CainnechK]

well if ur board with ur let me know when u want to sell it 😂

[@paulcondie2520]

Looks sorta like a rebranded Lexx

[@nomasker1360]

Rev limiter, not a good Idea on your valve seats

[@randomthings45]

Still going to sell her?

[@AdventureDaily]

Nope!

[@therealrealshocker]

😂

[@TadeuLuciano_3]

Belparts is brasilian

[@chris2414]

Is it just me or does it just sound like a pit bike now?

[@phunkdoctaspock]

You usually include torque specs in your videos. Any idea of the torque spec for the header bolts? Thanks for these videos, they're amazing. Stay safe.

[@AdventureDaily]

10 ft. lbs should be plenty, just be sure to switch nuts and tighten equally. Thanks!

[@chrisvillarreal2752]

My yoshi pipe wasn’t that loud on it and gave it a nice bark

[@harrynutsackk]