FrSky X9Lite X9D+2019 🤓 ALL YOU NEED TO KNOW - OpenTX - EU-LBT / FCC - Firmware - OTA - Access - R9

[@mmarsian]

Nice video and one of the first (if not the first) to show the complete procedure including OTA update. Nevertheless for me it's not time to buy my complete equipment again. Sure if somebody is sponsored, no problem, but my Taranis X9Dplus, the R9m and all the R9mm receivers they are not even 2 years old. I don't follow FrSky's attitude "For using the new features, you have to buy everything new". And they are not really budget. I would rather like to see, how people can maintain their current gear and keep it up to date.

[@TorbanDallas]

HI, thanks for your comment, I also have a lot of FrSky Taranis X9D+ / R9M (Firmware an maintenance) Videos on my channel - I’m still using my X9D+ with the R9M Module and the Flex Firmware - and it works pretty reliable - no one want’s you to buy new hardware 😊 You can stay with the old Hardware - only if you need the Access Protocol and OTA function you need to upgrade your hardware. And if you are owning the new FrSky Transmitters - you don’t have to worry if you don’t want to use the access protocol, all transmitters are backwards compatible. Btw: Maintenance with the X9D+ works very similar - install the latest version of opentx for your x9d+ (not 2019) radio and get the firmware from frsky for your modules and receivers.

[@Mateyhv1]

Excellent video, great content! Happy to find your channel!

[@TorbanDallas]

Thank you!

[@BrickWallFPV]

Nice set up Video. I was back in the air after this video. lol. I now have an X9D+ SE 2019, R9M2019 and Slim+ OTA. Thanks

[@TorbanDallas]

Thanks, please tell me how you like the slim+ ota - I would like to test this receiver too.

[@BrickWallFPV]

Torban Dallas I like the slim+ Old/OTA.. Frsky just come out with new slim,Mini/MM call R9MX and R9SX. Hope you check them out soon :)

[@osga3981]

great video as usual! thanks!

[@TorbanDallas]

!!!UPDATE 2019-09-14: OpenTX has released Version 2.3.0RC3 - In Companion now you need to select Release candidates (testing)! When the openTX Version is final, you need Release (stable) !!!UPDATE 2019-09-11: FrSky has released the Access Firmware for the R9M 2019 full-size module now! www.frsky-rc.com/r9m-2019/ With the R9M Access Firmware and your external module set to R9M Access, you can use the new Access Protocol with your R9M 2019 and your X9D+ 2019. Btw: OTA Update works also the same as with the x9lite.

[@mastafoo886]

any chance OTA update functionality will come to the QX7 when using the R92019 with it? I just purchased my R9 last night I cant wait for it to get here

[@ADMIND3R]

so i have the 2019 r9m module full size in my flysky nirvanna, but i have 2 r9 receivers that are not the ota versions, u are saying im able to use the access firmare on my module but not my recievers? so the access firmware is useless to me unless i have ota recievers? thanks for the help

[@TorbanDallas]

@@ADMIND3R no that is not what I have said. Take a look at the frsky website - you also get the access firmware for the old r9 receiver. You only can't use the Ota update function with the old receivers

[@BrunoM66]

Hi, congratulations for the video. I tried to follow the whole procedure. But I don't have the "isrm_mode_1.lua" script. Where can I get it back? Thank you.

[@TorbanDallas]

Thank you for your comment! I have linked the script in the comments. You can get it here: c.web.de/@400672573215480045/ZCiSYxw0THuc3tYleZIViw

[@BrunoM66]

@@TorbanDallas Bravissimo!

[@alvarozambrano7615]

Hi Torban, thanks for the video. Could you help me with an issue? I got an Horus X10S Express with R9M 2019 (Access) and a R9 SX receiver (Access) but its impossible to me to bind the receiver. Help me please

[@alvarozambrano7615]

My Horus and R9M are EU-LBT, when I register and bind it seem to be ok with solid green led but seconds after the receiver goes blinking red

[@maurizioinavigliana]

to upgrade and bind without wires, do you need to buy the ota receiver? old ones can't be updated to ota thanks ...

[@ATCATL]

Thanks for sharing these instructions. Banggood sells the X9D+ 2019 SE FCC and LBT versions. It really doesn't matter which one to get since we can always flash the firmware for what we want afterwards. Is this correct?

[@TorbanDallas]

Correct! 😉

[@ATCATL]

@@TorbanDallas Thank you!

[@sikkomedema]

I don't have the change ISRM mode option in Tools, what am I doing worng?

[@TorbanDallas]

you don't listen to me ;) and you don't ask the right questions.

[@likandrosmar]

Thank you for this video! Very helpful. I would like to ask two questions. I ordered today the r9 m 2019 with r9 mm receiver for my x9d 2019 se. I just discovered that in my order it doesn't say ota for tha 9mm receiver. Does this mean that I should order the new receiver with ota sticker or If I flash the receiver with the latest firmware it gets ota function. And the second question is that when you tried to register the receiver I saw in your taranis that you had the option to choose between fcc, lbt, 900mhz, 868mhz or access. When you choose access can't you chose between different mhz afterwords. (I am asking because although I leave in Europe I would like to keep my radio in fcc mode because some of my whoops receivers are in fcc. But for the r9 I want 868 mhz in order to avoid interferences. (I hope I managed to be clear and didn't confuse you thank you again)

[@TorbanDallas]

Thank you for your feedback, I appreciate it! Don't worry, you can also flash the non-Ota receivers with the latest access firmware, but the Ota function won't work! If you want to flash the receiver over the air, you definitely need to buy the OTA Receivers. If you download the Access Firmware, you will see that you get 3 folders, one for the fcc Firmware, one for EU and one for the flex firmware. With the flex firmware and your radio flashed with the flex option too, you will get the chooise which Frequency you would like to take on the binding process - you probably missed it, i have shown it in 11:56

[@likandrosmar]

@@TorbanDallas thank you very much for your help.. You are very kind. Have a nice day

[@troncho81]

thx Torban for the very detailed guide... i tried updating the R9MM and R9mini to access.... the update was OK but iwasn;t able to bind.... i'm running the X9lite pro, so do i have to update the internal modul as well with the nightly build? the remote cam with 2.3 official, but i couldn;t get it to identify the RX at the registration step.... the updating the internal nodule would not affect my other receivers? thx alot in advance

[@TorbanDallas]

Thanks for your comment! You need to update your opentx to the latest version (opentx 2.3.0rc4 at the moment) Check the flex option if you want the flex firmware, don't check it if you want the FCC Firmware, Check Eu in companion if you want the EU Firmware. This option changes the possible options you can select for your external rf. Then flash your external r9m lite to the latest fcc, eu or flex firmware corresponding to your companion setting. If you don't have an external r9 module you can't use r9 receivers with your taranis - then you need a R-series Receiver.

[@troncho81]

@@TorbanDallas thx.. meanwhile I was able.to update to the non access flex.firmware.. I'm running R9 lite module with MM receivres.. So I'll try going access flex once I'll update the radio to the latest openTx

[@GrecoFPV]

hi I'm trying to flash the latest OpenTX FW but is says wrong directory /FIRMWARE even though its on the sd card '

[@TorbanDallas]

Specifiy what you are doing please. Are you using companion as shown in my video? Did you download the firmware, and then when you flash it you get this message? Make sure to set the right structure path in the settings! And use en (english) language pack. In some cases you get errors with different languages.

[@GrecoFPV]

@@TorbanDallas it was a simple wrong name in the folder hehe took me 4 hours to fix it . anyway thanks for the response and thank you for your videos

[@jonasfreonas]

Hello,is it possible to bring it back ltu eu protokol ? if it's already there global (inetrnational)

[@TorbanDallas]

Yes, you can see it in my video. You can change the internal module into fcc or eu-lbt mode - it's not depending on the EU flag in companion. The opentx version has nothing to do with the internal module.

[@jonasfreonas]

@@TorbanDallas and after that can i change it back again?

[@jonasfreonas]

I read that you can't bring it back,access

[@TorbanDallas]

@@jonasfreonas you mean the external r9? You can also select EU or FCC.

[@TorbanDallas]

@@jonasfreonas please specify your question. Not easy to understand your question. Your can see in my video how i change the internal module into fcc and EU mode...

[@dmurillo11madrid]

Hello, thanks for the video! I have got a question. If I want to use access with 8 channels, how can I set rssi.? Will it be send in channel 16? When I bind the receiver with 8 channels, I get aux 5 going crazy in betaflight

[@TorbanDallas]

Thanks, it doesn't matter if you bind it with 8 or 16 channels. The aux that goes crazy is probably the rssi output. But you can also broadcast your rssi telemetry value from your transmitter back to your fc over a channel. I did it on my last range test videos.

[@dmurillo11madrid]

@@TorbanDallas thanks a million, you are the best! Keep bringing us this nice videos and knowledge

[@dmurillo11madrid]

@@TorbanDallas nonetheless, even when set to 8 channels, rssi is still being transmitted via aux12... I don't understand, should it not be transmitted on aux 4?

[@TorbanDallas]

@@dmurillo11madrid no, rssi output channel comes from the receiver and has nothing to do with the number of channels your are transmitting

[@quadthingcopter5984]

HI AGAIN! i am using the x-lite pro, everything is working except the rssi on the internal module using accts, my problem is from the telemetry-sensor source page on the radio, where it should say int module it is just blank and cannot get an option to change it, this issue is not a problem with the external module and works fine and i am getting rssi on the radio and osd but i use 2.4ghz on my short range quads, the radio picks up the rssi but i want to see the rssi in the goggles and i am not getting the rssi channel showing on the receiver tab in betaflight using the internal module. Any info to resolve this issue would be greatly appreciated. thank you.

[@TorbanDallas]

It's not an issue. There are two ways of showing the rssi. 1. Using the Rssi ouput channel of your receiver if the receiver and the firmware provides one. 2. broadcast your rssi telemetry value from your taranis back to your quad over a channel.

[@quadthingcopter5984]

@@TorbanDallas Thanks again for answering but managed to sort it out.

[@pierre-emmanueletheve2838]

great video, nice explication! very good. Where i can find the ISRM lua script for X9D plus 2019 please?

[@TorbanDallas]

Thank you. I have uploaded it right here: c.web.de/@400672573215480045/ZCiSYxw0THuc3tYleZIViw

[@pierre-emmanueletheve2838]

@@TorbanDallas Thank's very much !!!

[@pino7946]

good the link for the file does not work to be able to switch between fc and eu

[@fanisaiupzhanov2299]

Hi Torban! I have Taranis X9 lite pro uruav edition and eachine reddevil 2 drone. I can not bind them with each other. However I can bind drone to other frsky transmitter and can't bind my taranis to other receivers. Seems like a problem in transmitter. What could be a problem? Could you please suggest something to do?

[@TorbanDallas]

I don't know the reddevil 2 drone, does it has a FrSky Receiver? Also make sure to use FCC or EU-LBT Firmware on your Taranis and your Receiver.

[@fanisaiupzhanov2299]

Torban Dallas In explanations to Red devil it says it suitable with frsky, flysky and other. I chose frsky. How can I check eu/fcc receiver?

[@TorbanDallas]

@@fanisaiupzhanov2299 you can't check it, you only can flash it.

[@enricobononi8655]

Hi Torban....question: 1) are the old r9 mini and r9mm receiver compatible with the new access protocol and firmware?? 2) I know the old r9module is not compatible so I will buy the new one....but can I use the new module with my QX7 radio? I will not use access with the internal module.

[@TorbanDallas]

Yes you can use the new module with your old taranis. And you can also flash the old r9 receivers with the access firmware - just take a look at the frsky website ... there you will see that you can get also the access fw for your receivers. But at the moment i think you won't be able to use the ota update function with your old taranis.

[@enricobononi8655]

Thanks. Even with a new R9M module I won’t be able to use the ota??

[@TorbanDallas]

@@enricobononi8655 I don't know. I think it depends on opentx and your radio.

[@norlaq278]

Hello, sir! This transmitter dont support d8. Will I have any problems with tiny whoops like mobula7, that uses d8 protocol? Or if I'll buy multiprotocol module which supports d8 - It will be ok to fly that tiny whoops? What about long-range modules? Which one to choose to fly far away?

[@TorbanDallas]

Hi, at the moment there's no D8 option available, but hopefully, opentx will add this option on a newer firmware release. They are adding more and more with every release. With the first release the new FrSky Transmitter haven't been backwards compatible and now they have added more and more option to also use the old accst receivers.

[@LutherFPV]

How can I get the ISRM Lua script for changing to lbt from fcc version? You said I could email but what's the adress?? great video!

[@TorbanDallas]

Email is linked on my YT Account Info, or Facebook, but of course, you can also ask me right here. I was hoping opentx would add this script on their sd card contend - but they apparently didn't do it. So ... I have uploaded it on my webspace right here: c.web.de/@400672573215480045/ZCiSYxw0THuc3tYleZIViw

[@JMFPV]

compilation error when i try to donwload .... can you helpme? and i want to use with the crossfire mod with the TBS Crossfire Receptor Nano , is posible?

[@TorbanDallas]

Crossfire is available for the external module so I think it's possible to use crossfire the same way as it was possible bevor with the old FrSky Transmitter. I don't have Crossfire Modules and Receivers .. I'm only a FrSky R9 User :) Where did you get the error? As you tried do download your opentx in companion? Never had this issue.

[@JMFPV]

@@TorbanDallas Thanks Dude for supportme

[@Nicklz5555]

Thank you torban for the effort and all the good information. 👍 One question is when you get the radio it has a version of 2.3 on it already so isn't that the same as what's on opentx website? Maybe a nightly build already? Did you check before you flashed? I had an email back from frsky with the tools to change to lbt but was just wondering if I could put that straight on without messing with firmware and just update the internal module, bind and fly. I don't really want to use a nightly build unless it's OK too? Cheers

[@TorbanDallas]

Thank you for your comment! Yes bevor there was also a earlier version of opentx 2.2.3 installed - but this version wasn't compatible with my r9 modules...

[@Nicklz5555]

@@TorbanDallas ah OK thanks for the info. I'm still waiting on shipping to receive the radio and will be doing all the updating soon as I get it 👍 take care

[@TorbanDallas]

@@Nicklz5555 maybe you one comes with the latest version of open TX. Or there's even released an official version when you receive your Taranis 😁

[@Nicklz5555]

@@TorbanDallas well 2.3 has just come out 😉

[@TorbanDallas]

​@@Nicklz5555 yes, OpenTX 2.3.0RC1 :)

[@MrRyanf1981]

Do you need to bind trough sport first before using ota? Or you can use ota straight away on a brand new r9mm access?

[@TorbanDallas]

You need a R9 Ota Receiver, but you can also flash your old R9 Receivers with the Access Firmware - but if the old Receiver isn't OTA ready, you need to flash this one over a wire. If the OTA Receiver comes with the correct firmware, you can register and bind it without connecting it to your Transmitter.

[@MrRyanf1981]

@@TorbanDallas i have an x lite pro already and an r9mm ota on the way can i flash it over the air straight away?

[@TorbanDallas]

@@MrRyanf1981 yes I think so when it comes with the OTA Access Firmware. Power it, register it, and you can bind or flash it as shown in my video :) you only need to get the firmware from frsky and copy it to your firmware folder

[@MrRyanf1981]

@@TorbanDallas great. Thanks for your work keep it up

[@Wibration]

Hi Torban, great video! Where can we find the isrm-mode-1.lua please? It's so much easier to change between FCC and EU-LBT with this script than with the old process! Keep going, it's one of the best videos about how to set a radio on the internet!

[@TorbanDallas]

Thank you very much - I appreciate it! What do you mean with the old process? On the old x9d+ it was possibile to change it but then frsky has released two different internal modules and then it wasn't possible to change it anymore. However - here's is what you are looking for ;) c.web.de/@400672573215480045/ZCiSYxw0THuc3tYleZIViw

[@Wibration]

@@TorbanDallas I talk about with my QX7, I need to have the right script, select it and then flash the internal modul with it. But here with this lua it's more "visual" to choose between them, I like it. Thank you very much for the link! :)

[@TorbanDallas]

@@Wibration ok, don't know if this script also works on the qx7 ...

[@kreisflieger]

Thank you for the video. I can very good versteh you.

[@ASorren]

will the previous X9D+ SE work with the OTA using the R9 module if everything is updated to the latest?

[@TorbanDallas]

I didn't try it. Do you have the Ota update option on your opentx version for your radio? I doubt it.

[@ASorren]

@@TorbanDallas no, FrSky isn't supporting older product with the new ACCESS protocol. Looks like only R9MM will work as long as Flex firmware is loaded. Do you know off chance if I flash the R9MM-OTA with the R9MM firmware, will it essentially turn it into a non-OTA R9MM? Or am I stuck with a receiver I cant use?

[@TorbanDallas]

@@ASorren try it and let me know if it works :P

[@mmarsian]

Hi Torban. I've got now a x9d+2019 and a r9m 2019 for testing. The internal module is backwards compatible so that I can use my old rxsr with accst . What about the r9m 2019? I flashed the access flex firmware and set the external module to r9m and 868. The old R9mm has still the latest flex firmware of 02/2019. I was not able to bind the rx, unless I flashed the old non access firmware to the r9m 2019. But like this I will not be able to use old and new R9mm in different models. It would be better if both can be used like with the internal module. Any idea?

[@TorbanDallas]

Yes would be better but I'm not the one who is programming the Firmware... I think you have to decide which fw to use. You can flash your old r9 receivers to the access firmware. That's what you can do.

[@evangelospolychronopoulos189]

Hello. Thanks for the video. I stupidly updated to Accsr V2.0 on my X9D+ 2019. Now I can't bind to any D16 integrated receivers. Do you have any advice? Or do you maybe know where I can find older versions of frisky Firmware? They have taken them all down. Thanks :))

[@TorbanDallas]

Did you update your opentx version or the internal module? With your X9D+ 2019 you can bind Accst and Access Receivers, no need to flash an older Firmware version!

[@blackbarett6632]

Thank you for that video! I got a question: I was trying for hours to get my brand new radio working in EU mode - I could not find the fitting firmware - now thanks to your video I know how to change that xD So obviously the radio is bind to the receiver in FCC mode... when I change the setting in the radio, will the receiver still work, or do i have to change / update something else as well? Thank you

[@TorbanDallas]

Thanks for your comment, you also need to update your receiver to the EU firmware.

[@outboxfpv4360]

Hi bro Do we need Access radio to get OTA feature? I having old qx7 ACCT

[@TorbanDallas]

yes, only the new radios with access are supporting OTA Updates. And as i know it's hardware related, so there won't be a opentx future release that adds the ota function.

[@outboxfpv4360]

@@TorbanDallas Can we flash flex firmware on R9 rx and will with work with old ACCT qx7 ??

[@TorbanDallas]

@@outboxfpv4360 you need accst oder access on both: Module and Receiver. But Access is only supported by the new r9m 2019 or the x9lite pro module. But you get the access fw also for old r9 non OTA Receivers on the frsky website. So you can use the r9m2019 with access and old receivers with access.

[@outboxfpv4360]

@@TorbanDallas I was asking about my TX. I have old Taranis qx7 will it work on it?

[@stefankellenberger8315]

@@TorbanDallas also das alte R9M läuft nur mit accst Firmware verstehe ich das richtig? Könnte ich dann die r9mm, r9mini, r9mmOta Empfänger mit der gleichen Firmware flashen?

[@lukass8169]

hallo torben :) gutes video! wo find ich denn das lua-skript um das interne modul zu flashen?

[@TorbanDallas]

Hi, schau mal in die ersten Kommentare, da hatte ich es schon einmal verlinkt. Da findest du es sicherlich am schnellsten ;)

[@alexg5055]

Hi Torben, was für ein Tutorial….richtig, richtig gut, 👏hat mich schon ein gutes Stück nach vorn gebracht…leider funktioniert der link zu dem lua script nicht mehr. Wie komm ich da am schnellsten dran? Ich danke Dir.👍🏻

[@zvonimirtrgovcic5499]

Can i flash r9mm OTA receiver with old flex firmware (ACCST protocol)?

[@TorbanDallas]

yes

[@zvonimirtrgovcic5499]

Ok 👍

[@stuuser0]

Do you think there are any issues with keeping on the FCC firmware when you live in the EU?

[@TorbanDallas]

Yes of course and it's illegal. For the r9 you need 868mhz and for the internal you need listen before talk... Keeping fcc would work... But no I don't recommend it.

[@stuuser0]

@@TorbanDallas OK thanks for the information :-) and very helpful video

[@Mateyhv1]

As said its illegal.

[@sushreymeher3981]

How can I get ISRM Lua script for X9D plus I have EU (LBT) transmitter and want to convert to Non-Eu(FCC) because of that I can not able to connect my R9M module to R9mm receiver

[@TorbanDallas]

I don't know if this script also works with the old x9d+, there were two versions, fcc and eulbt with different internal modules available. So I doubt that you can change the internal module to fcc. And you are talking about the r9m... That has nothing to do with the internal one. You can flash the EU or FCC fw to your r9m module and your receivers.

[@sushreymeher3981]

@@TorbanDallas Okay Thanks for quick reply But I'm facing issue with binding r9m module to r9mm.And 3-4 weeks ago I manage to bind the receiver but after connecting to quad in just 5 to 10 sec it says telementary lost and nothing works no input shows I don't know what causing the problem my r9m module is also EU(LBT)

[@TorbanDallas]

@@sushreymeher3981 both have the same firmware version? Sadly frsky has released some faulty r9mm receivers with problems like yours... Maybe you have a bad r9mm 😕

[@sushreymeher3981]

@@TorbanDallas think so 😔 Thank you 🙇

[@fpvltd]

Is X9D+ SE 2019 Support R9M 2019 Access. Protocol. Im not able to see in my X9D

[@TorbanDallas]

Yes it is. I can select R9M Access. But until now I can't find the Access Firmware for the R9M - seems like there will be released a new Firmware or even a new R9M Module soon.

[@TorbanDallas]

Update: since yesterday the r9m 2019 access firmware for the external module is available at the frsky website. Just this fw and the latest version of opentx as shown in my video, select r9m access in your transmitter and you can use the access protocol on your r9 system

[@fpvltd]

@@TorbanDallas Thanks I have checked

[@Mateyhv1]

X9D cant. X9D 2019 can

[@TorbanDallas]

@@Mateyhv1 Did you try it? Theoretically, it should be possible to run the r9m 2019 with access protocol on the x9d+ (non 2019 version) - but it also depends on the optenTx version for the x9d+ (non 2019 version)

[@Reecefpv]

im wondering if its gonna make it hard to get parts

[@TorbanDallas]

parts for the old frsky transmitters and receivers?

[@Reecefpv]

@@TorbanDallas lol didn't realize the video changed I commented on wrong video lol

[@TorbanDallas]

@@Reecefpv haha :D what was the previous video?

[@Reecefpv]

@@TorbanDallas about the remote Id on drones

[@f.a.m329]

is capable r9 2019 with a x9d plus accsst, can be R9 firmwared with a specific firm to be capable??

[@TorbanDallas]

yes

[@f.a.m329]

@@TorbanDallas with which firmware tx¿ rx? and open tx?

[@yunkeacme]

I am SICK of r9s, I had 3 died with steady red led, then I bought 3 new one and came with access OTA stickers, and I cannot use them on my "old" configuration, i need to reflash my module amd taranis and then what happend with my other 5 quads that have the "older" r9mm model. BULLSHIT. Time crossfire

[@TorbanDallas]

You can flash old accst fw to the new Ota access receivers and the other way around. The receivers are all backwards compatible like the new radios. Unfortunately only the old r9m can't run the access fw.

[@ALL4FPV]

why you dont give a link for lua script? It is a tool you use in the video, but you dont provide it... Thank!

[@TorbanDallas]

I said that you have to ask Frksy, or me :) or maybe I will link it. But now you have asked me ... I will send you a link.

[@TorbanDallas]

btw: until now, there were only two one asking me for the lua script - so there are only two eu users - or no one listens to me ;) Here's a link for you, maybe i will also link it down below c.web.de/@400672573215480045/ZCiSYxw0THuc3tYleZIViw

[@ALL4FPV]

@@TorbanDallas that is how I ask when I am panic 😂 pls give me a link

[@TorbanDallas]

@@ALL4FPV I did above...

[@ALL4FPV]

@@TorbanDallas thanks very much🙏☺️

[@246rs246]

can I update my x9D plus? or i must buy new radio?

[@TorbanDallas]

You can't use the Access Protocol with the old x9d+ for r-series receiver with the internal rf. But of course you can use the r9m 2019 with the access protocol. But I'm not sure if Ota update works.

[@246rs246]

@@TorbanDallas but I can't finde access update for my old x9dplus :(

[@TorbanDallas]

@@246rs246 did you install the latest version of opentx (OpenTX 2.3.0RC4 )? On the external Module - there I think you will also get the option R9M Access,

[@246rs246]

@@TorbanDallas I mess up settings on Companion, that was reason why I can't update my taranis to 2.3. Thx for help :)

[@TorbanDallas]

@@246rs246 and now you can select r9m access?

[@gojacco]

Where is the file?

[@pino7946]

good, you know if the new update 2.3.7 already has implemented the isrm-mode-1.lua or you have to keep putting it by hand, thanks and regards.

[@TorbanDallas]

Thanks. No, the script doesn't come with the new update 😔

[@pino7946]

good you could put the file for change isrm mode,thanks.

[@TorbanDallas]

It's linked a several times in other comments right here. Check the comments or wait till tomorrow, then I'm back on my computer to sent it

[@pino7946]

good I do all your steps but with the stable version opentx 2.3.2, I put at r9m this version FW-R9M2019_ACCESS_V1.1.1 (R9M2019_FLEX.frk) and at r9mini this version FW-R9MINI-R9MM-ACCESS_v1.1.2 (R9_MINI_FLEX.frk) but I do not get flash S.port only gives me the option of flash external device and when I run it, it gives me an update error, which I do wrong, I think the firmw are the same version and also tried with other firmw, I don't know what to do anymore, Regards.

[@TorbanDallas]

Flash s.port doesn't work on a X9D+, I think it only works on a Taranis X9 Lite or Pro with the external s.port. On a X9D you need to flash external device and to connect it to your pins on the module bay. If you are using OTA Receivers with you new Taranis X9D+ 2019 or X9Lite Pro you need the OTA Firmware ( But you can also flash old non Ota Firmware to OTA Receivers) I have heard about errors on flashing OTA and registering receivers with the newer opentx versions, it was already a bug that i have even posted on github. As you can see here: kzbin.info/www/bejne/iXrJg3p_hduJl8k Maybe that's the error you are talking about.