The 411 on wheel specs for the 22 BRZ - Basics on the BRZ Suspension and Wheel fitment

[@Chill_Please]

I didn't think I would like these more than the prev gen but goddamn that car is so beautiful 😍

[@donewhiskey]

The Gen 2 BRZ looks incredible

[@JoeOvercoat]

Absolute delish.

[@XxZ1GGYxX]

No it doesn’t…

[@AwesomeBob]

A little toe-in in the rear will add stability under hard braking (like after a long straight on the track) so "0 toe" is not ideal. A small amount of toe-out in the front can also help with turn-in, but will increase the amount of wear on the inside of the tire. Some alignment shops also add a small difference of toe-in for the front to help keep the car tracking center on the road, which generally always has a small amount of crown to help water run off the road into gutters. I often need to give specific instructions to my shops to give me 0 toe or a small amount of toe-out, but an even amount when I'm expecting an immediate track day vs street driving.

[@JoeOvercoat]

You can tell them that you don’t want that offset for the crown and they will look at you funny, but they will comply with your request after warning you that it voids blah blah blah.

[@keithedisonmarquez4271]

Thank you for helpful info. It really help me choosing my fitment as i just got my first brz.

[@86Speed]

No problem 👍

[@zrob]

So looks like 18x8.5 +45mm should be good on stock! Sweet.

[@al3x14]

I know this might be a dumb question I also want to go basic mods/upgrades so basically the 18x8.5 rims like the ones in this video which I like with a 45mm tire? I can’t use the stock tires and just switch rims or would I rub and would it not be fitted correctly?

[@RR-cg2rq]

What tire size do you have on the 8.5" wheel?

[@bigfatdeal5]

What were the tire specs on the first option?

[@tims9294]

Thank you for the video! Could you do a video comparing the HKS drop in filter to the K&N filter vs stock? Maybe taking out the charcoal filter as well? Do some dyno runs and check the difference? Much appreciated!

[@86Speed]

NOTED

[@alphabeta8403]

1:20 18x8.5 +40 mm ..ideal setup for non-agressive stance. Can you share picture/video of this set-up on STOCK suspension, i.e., NOT lowered? Thanks!

[@Sookigarage]

Tire specs would have been really helpful, at least in the description. If I had to guess, they are probably running a 245/35/18 for option 1, but they would have to confirm. Also, what is the suspension setup on the BRZ for option ? Looks lower than stock.

[@LandyG19]

great video. also you can run a less wide tire and the stretch should be just enough to avoid any rubbing.

[@86Speed]

Thanks for the info!

[@necrolordtv1595]

I have that style lower control arm and I run 18x9 +35 with 1.8 degrees front and -3.2 degrees rear camber no rubbing, no scrubbing. front flush rear nearly flush.

[@86Speed]

Anything is possible - Watch our ruined video posted before this one. What is your ride height and tire , these things matter also. There are always 4 things to consider 1. Wheel specs 2. Tires size / stretch / profile 3. Camber 4. Amount of drop and suspension travel and dampening stiffness.

[@necrolordtv1595]

@@86Speed 26.25" from ground to fender lip front and rear with Eagle sport AS 235/40r18s

[@DriverGuy23]

18x8.5 +40, done! Thanks

[@86Speed]

Glad we could assist

[@alphabeta8403]

Stock height? Got a picture/video of stance?

[@okthen8445]

Maybe do a similar style video with different tiers of ride height explaining what you need suspension wise the more you lower your car. Daily Street Track Stance

[@86Speed]

We kinda did that on our video title ruined. We dumped the GR86 all the way to the ground

[@krownAndrebrampton]

Is option 1 on stock suspensions? Looks amazing fit!

[@TABRO284]

I want to see some different 17" wheels on the 2022 model.

[@chrisgagne6489]

Is option 1 18x8.5 +40 front and rear? Also, how much is the car lowered? This is exactly the look I want.

[@GB-np4pi]

Is 1:51 on stock ride height?

[@tristanhighsmith4034]

Love the video and the channel just wondering if option one is with Coilovers or stock suspension

[@dloyer4]

On this, or any other "fitment guide," it would be helpful to know if the car is at stock ride height or if it has been lowered. And if it has been lowered, how much has it been lowered.

[@Sinancan93]

Option 1 definetely for daily use like i am planning to without wild modification on the body and suspension geometry

[@MercuryGlide]

Great video, thank you!

[@Yungwalt]

What if you run 18x9’s with a 245/35?

[@DIGPLatinodriftking1]

So at what ride height do you start running into this sort of issue as well? And yes I realize wheel width is the biggest factor when dealing with tire to fender contact. So are people dropping down 1" inch? 2" inches? 3"? Personally I'm not a "stance" kind of guy so camber really isn't my taste. Thanks in advance

[@PBrooksSawyer]

My 18 x 8.5 + 38 wheels stick out more than yours. Not sure whatsup. Hoping these BC racing coilovers I just ordered will have the proper camber adjustment Ill need. Im pretty worried about rubbing.

[@chrisgagne6489]

+38 should stick out more.

[@cybertroy2]

i reckon this car looks good in white.

[@rutleyj]

Titan website says 9x18/17 +47 for the gr86 BRZ. Can you please do an updated video with the new recommended size. I'm not sure what tire will fit and what mods need to be done

[@brandonn2584]

Would 18x9.5 +45 rub???

[@ravenstylea2]

The 9.5" rear wheel looks great, but it's not ideal for autocross and will hurt your top end on all straights. It also won't help as a daily because the really grippy rear end is no longer playful around turns. The 8.5" wheel is best. Run a spacer if you want to fill that gap.

[@alphabeta8403]

How does it look on stock suspension? Got a picture/vid/link?

[@niceprince]

These look just like the Foregestar wheels I had on my Z!

[@chadhislop4041]

On option 1, what size tires are you running?

[@jameisonroyce7550]

What about a 18x9?

[@86Speed]

That will fit also - more offset will be needed

[@paulshi5974]

@@86Speed Would a +51 offset work for 18x9 on stock suspension? Because I'm looking into the new Advan GT Beyond 18x9 +51 for my GR86. Also, as for 18x8.5, how much play can we have in the offset from +40? Thank you.

[@86Speed]

@@paulshi5974 Give a call in to us and we can confirm and get you a great price - Talk to Oscar

[@paulshi5974]

@@86Speed Oh sorry my car hasn't been delivered yet haha. I'm getting a bit hyped about mapping out what I want to do to it. But I will come back and give you guys a call when I get the car

[@86Speed]

@@paulshi5974 ok. Wheels might take just as long or even longer to get -fyi

[@ZMacky]

Can u test fit a volk ce28 18x9 +40 255/35 and do this on the 2 finger gap or decent drop not crazy. Just enough to remove the wheel gap

[@Vasili_Wears_Shorts]

Awesome vid! Can you confirm if the first setup (18x8.5) will fit the AP sprint kit designed for this car? I believe the AP fits the stock 18” wheel.

[@harrybuhse8622]

Thank you so much for this video it's been a burning question for me! So if someone was running track camber (-2.4 to -3) then 18x8.5 +40 would be ideal flush fitment? Does that mean you'd be able to fit 255s front and rear or only 245s? My state is very strict so I can't afford to have poke but I'd also hate to have too much tuck as well. Also this is a silly question but does this fitment involve any fender rolling? Thank you 🙏🏻

[@DenisDamulira23]

255 is too wide. 245/40 is too tall to fit without major adjustments. 245/35/18 works on 18x9.5 +45 with coilovers and no mods

[@451jbelen]

What about in the middle, 18×9" wheels?

[@jackivan2131]

Cant seem to find the titan wheels in a 18x8.5 +40. I can only find the 18x9 +47. If anyone has a link for the 8.5 it would be much appreciated!

[@IcyFrxsty]

could people who may run bags on their 22 brz be able to run tucked fitment with the 18x8.5 +40 wheel and 245 35 18 tire?

[@chrisgagne6489]

18x8.5 isn’t available on your website.

[@Blacklisthgs]

Will the wheels that are linked fit in stock suspension?

[@andrewxu2618]

Hi, when will the 18×8.5 40 titan wheel be available? there is only 18×9.5 on website currently.

[@86Speed]

Shoot us a DM on IG - we got ya

[@avery4528]

I like 8.5 x 17 with 225 rubber for now.

[@jl5731]

What about the fronts? Is there no rubbing issues with full lock turn?

[@86Speed]

naw

[@Morganotanii]

does 18x9.5 rub even with a gr86 at stock height and suspension?

[@jeeps005]

great vid

[@gauravawadhwal5988]

Is there much difference between last gen and this gen on fitment? e.g. would option 1 also fit the previous gen without modification?

[@kind1st]

I am wondering if I Can Pop Firestone Firehawk 235/40R18 Tires on my GR86.. ON Stock Rims??

[@123410tan]

Was wondering what are the tire specs on option 1? Thank you!

[@bramiz86]

245/35/18 , was able to catch it one of the scenes

[@RR-cg2rq]

Will 255/35r18 tires with 18x8.5 +44 fit without any issues?

[@yoojayy8712]

That’s a crazy tire stretch

[@rockcrawlerchurch2976]

Im not in the americas, and as such wheel choices here are different without paying stupid markups. I'm looking at running an 18x8. They come in either +35 or +42, i was thinking +35. With the stock 215 on the front and a 245 on the rear. Do you recommend 40 or 35 for the side wall? The suspension is stock ride height. I wont be lowering it, as im 6'4" and only getting older. I probably wont be adjusting any of the suspension or steering parts for the warranty period because its only a street car. I just want to personalise it to my taste. Any help is appreciated.

[@NarekAvetisyan]

Can you fit a 295mm tyre on the rear of the car?

[@AyyGin]

No lol. People are struggling with 255 and 265s on this new body. You can do 295 if you cut your fenders and go widebody tho.

[@joserios2973]

if my 86 isnt lowered can i put the 18x9.5? since its a lil hight off the ground the tire wont rub against the fender…right?

[@GAMERIC5]

Other examples of the 18x8.5 +40ish on stock suspension show the rear being pretty close to flush but the front wheel having a lot of tuck. What has been done to the car in the video? just lowered? spacers?

[@86Speed]

Only suspension - we have a video link in this video that shows what we did earlier to this car

[@r6mt09]

Will the 17x9 +37 ts5 fit with stock suspension without any issues?

[@chuckd_8905]

.

[@elyssesmagcaling]

are these the older gen titan 7 wheels? did it require any fender rolling?? I heard titan 7 is coming out with a updated version for 2nd gen GR86

[@rutleyj]

Why does the titan 7 have 9 inch wheels with 47 offset listed as the wheel for this car? Will that wit without spacers?

[@alexc7864]

Yup. I have them and they fit flush.

[@deubyslife7645]

18x10 +25 rear with a 225x40

[@86Speed]

make it work - thats aggressive af

[@pchae1]

I put a deposit down for a GR. When will the 18x8.5 +40 TS5's be released?

[@86Speed]

Taking orders now - Please give us a call - Oscar in sales can assist.

[@Kaiju.FL5]

How about the front end if you run the 18x9.5 wheels? Do I need some control arms to make it fir with no rubbing?

[@PBrooksSawyer]

What are the dimensions of the tire itself? 245, 255, 265?

[@86Speed]

245 on that Titan-7 wheel

[@alphabeta8403]

What is it lowered on and by how much?

[@Netryon]

It's beautiful outside, but inside something is missing.

[@iKoNiiCk]

Is this all aplicable for the GR86?

[@86Speed]

100%

[@RR-cg2rq]

Bro, it's the same car 😂

[@malcansdell5778]

Thanks bro well do ne vid.

[@grantkahale8933]

Anyone know will 18x9.5 +45 on a 245 / 35 / 18 clear without rub or clearance issues?

[@86Speed]

Will be safe to trim - it will all depend on your suspension and camber settings , try it out either way.

[@brandonn2584]

Yo, Did you find out? I want to run the exact same setup

[@oogalee]

How much camber is at the front and rear with the 18x8.5 +40 fitment? The car in the video is lowered so its not completely stock.

[@86Speed]

This car is on Coil-overs - watch the earlier video on fitment with the RSR Coil-overs

[@alphabeta8403]

@@86Speed How low is it compared to stock? Any rubbing?

[@cody1964]

why dont more BRZ owners get the 86 front bumper? Looks a lot better (I am bias as fuck I just bought a new 86)

[@anishnar]

It sounds like 18x9.5 +38 with tires that are 255 is the main rubbing factor. If I got 18x9.5 +38 with 245/40 would I still rub? I’m thinking of dropping the car just an inch.

[@86Speed]

In my opinion yes

[@anishnar]

@@86Speed Okay yeah I thought it might too. Possibly 18x8.5 +35 with 245/40 or 235/40? Same drop.

[@louissenn9897]

Im running 18x9.5 +38 but only 225/40 and natural camber. Dropped ~1.5inch Trimmed very little of the fender piece not the full thing and no rubbing

[@nickjacobsss]

Really sucks titan 7 dropped the 18x8.5 spec as shown here. Functionally anything wider than that is just killing performance

[@TheG60528XiJinPing]

This convinced me the brz looks better than the gr86

[@nasticgaming1242]

my new gen fitment better 🥱