Thanks for this. Just noticed I needed to replace my bearings and didn't have a clue where to start. All sorted now!
@Rick--A-F2 жыл бұрын
Love the socket tip!
@edge233104 жыл бұрын
Awesome vid, thanks so much mate, just the tutorial I needed 😘🤗
@roadster12373 жыл бұрын
Thank you sir, great vid
@bodarobi80574 жыл бұрын
Thank you man!
@murkshkis872 жыл бұрын
Thank you!
@boenklon22 жыл бұрын
Thank you sir, finally brave enough to do bearing change on my fulcrum. i notice once i place back the rear hub, i cant hear any sound anymore from the hub. is there something that i miss?
@chrisrice9832 жыл бұрын
Hi, love the video, this may be a stupid question but are the front wheel and rear wheel the same size bearings? Thanks.
@alexzarko10 ай бұрын
💫💥❤
@dwyerlavery85234 жыл бұрын
In my own experience with the non disc version of these wheels, the bearings in the freehub go bad after a very short time. I got just over a year out of them originally from new and then when I replaced them, with a decent brand, they only lasted a few months and went again. There doesn't appear to be any seal on the outside of the freehub so the only thing that stops water and dirt is the seal on the bearing itself. Seems to be a bad design. Have now my third set of bearings in there so we'll see how long they last this time. Maybe you should do a video on replacing the freehub bearings as they are trickier to replace and seem wear out a lot sooner.
@FreeToCycle4 жыл бұрын
kzbin.info/www/bejne/kHzWkGl6rd2ZmpI
@SupernovaRallyteam2 жыл бұрын
Agreed gone through 3 sets of hub bearings in a year. Worst wheels I’ve ever had for bearing wear. Always good videos these tho 👍🏻
@mariuscartoafa90042 жыл бұрын
The same thing happens to me, I think the bearings are of poor quality. what brand did you put
@vinhtrinh21153 жыл бұрын
Hello could you please let me know what size bearing from front and back thanks
@Life_a_bike Жыл бұрын
Always fun if you realise you forgot to put in the axle if the second bearing is placed 😅😅
@JUSSTTIINFU3K4 жыл бұрын
What brand of bearing do you recommend?
@FreeToCycle4 жыл бұрын
SKF , NSK or NTN are all good brands to use for bearings!!
@retizotyo3 жыл бұрын
Thanks for the video! I have the Racing 6 DB and I had to replace the bearing in the front wheel after 1 years of light use... I wanted to buy SKF in a regular bearing shop, but I found that the bearing in the wheel is not an ordinary size. So at the end I had to go to Fulcrum dealer and had to buy the 'factory' one...
@LRGXRP3 жыл бұрын
How do u know if your bearings have gone bad?
@Rick--A-F2 жыл бұрын
Take the wheel off the bike and remove the quick release spindle. Hold the wheel vertically by the ends of the axle and spin the wheel, if you feel any grinding the bearing has worn.