Full EPIC Porch Build On MY NEW RRHQ Start to FINISH Fixed Sound Issue

In this episode of building my dream shop I start building an epic porch on my new RRHQ. We build a lot of porches on our buildings, but this will be a little more classy with hip roofs framed all the way around. Just wait til I install the standing seam metal...it is going to add a ton to this build like porches always do.
RR Post Frame Plans
rrplans.bigcartel.com/
NEW ALL BLACK RR Hats
rooster.beachandbarn.com/rrbu...
Diablo Step Bit Set
amzn.to/3xwrtTr
Monster Beam Saw
amzn.to/3xul9f4
Makita 10 1/4” beam saw
amzn.to/3xyx0sG
Hidden Simpson Timber Connector
connectorsonly.com/simpson-st...

[@stevenbrowningsr1144]

Your porches always make the corners of the buildings look so much better.

[@ezk9026]

Ive been watching This Old House my entire life and I gotta say this is my favorite construction videos by far. Great work All, thanks for the content! Stay safe!

[@RRBuildings]

Wow, thanks!

[@ilovelamp61]

This Old House ain’t got nothing on these guys! But I also grew up watching and loving that show. lol

[@dylongrantski991]

​@@RRBuildings I can model anything in 2D or 3D if needed. I can provide .pdf .dwg .drw. or .prt files. I would be excited to help.

[@thedivide3688]

The power of friendship fist pump...such dorky guys LOL. LOVE IT!!!

[@koreykilburn5303]

Did you two plan this out? Kyle working in blue gloves with Makita tools. Greg walks around the corner to save the day with a Milwaukee shop vac wearing red gloves. 😂

[@bobflores]

A gable centered over the door would look cool. Thank for the episode.

[@kennethvogt9379]

DIYer here: I can't help but notice in these videos how frickin' strong you are. I guess my decades of pencil jockeying haven't prepared me for the wild.

[@carguy1312]

Same.

[@1998TMaN1998]

They’re both not only in a physically demanding job but also avid gym goers.

[@yentrader]

Those posts and beams are cedar, not terribly heavy, probably less than half the weight of treated lumber. 😅

[@hhanger1]

Try moving around composite decking material. That stuff is extremely heavy!

[@rebjake]

Same. Strong legs from cycling but that's all.

[@kylehenderson372]

I think your porch construction videos are my favorite. Don't get me wrong I watch every video but this one turned out💵

[@scottschultz895]

As soon as you said "8 foot minus 3/4 " I knew !!!! You were hooked on the outside with tape,needed to add 3/4 for center. I've been there !! Lol

[@wayneashke1]

Thank you for fixing the audio issues of the first try. Much appreciated.

[@garydietz8807]

I am constantly amazed at how much foresight it takes to get everything in its correct place

[@1GameKeeper]

Makita power tools. Brilliant! I have a whole kit that I bought 25 years ago they have been used daily, in my trade as a carpenter and not one has ever let me down

[@jmar5787]

Thanks for fixing the Audio and that's one Great looking "SHOP"!

[@lb7wade518]

The man has calculator skills!!!

[@jarrettalmand]

I know you guys do all the math and prep but you both still make everything look so easy. Makes me want to build all of the things 😂

[@zephyr1408]

Remember Kyle u just turned 50 ! Take it easy on the heavy lift!

[@jamesa8851]

I love Kyle asking about somebody whose good at CAD can take measurements and design a structure in 3D and give you a set of plans. I think you just described an Architect.

[@Bill_N_ATX]

Although true, often time you just need a good draftsman. An architect draws from a wide array of skills and knowledge to think up and design a structure, its interior and exterior while building to codes and best practices. They sometimes need engineers in certain areas for some more complex designs. But for simple things like a porch, a low deck, or other very common project, a knowledgeable draftsman is fine for getting the design on paper. In fact, that’s probably going to do the majority of the work if you go to a large architectural firm. A draftsman who works for the firm. Honestly, they don’t get the kudos they deserve.

[@parascalemodels]

The perfect program for this would be Chief Architect. I use it daily. You design in a parametric space which allows you to totally see the house in 3D as it is drawn. Been a total gamechanger for my clients who cant envision their house off a normal set of plans.

[@jayjones5233]

Kyle, my brother is a CAD guy that draws custom homes. He can draw up what you need. Let me know

[@delvinjenkinssr7470]

I’m a beginner and I love watching you guys build.

[@Mcgiever100]

Stay with it, might buy a framing calculator.

[@xoxo2008oxox]

"Kyle, you are the GOAT!"

[@pv5759]

The power of friendship

[@Malandrin]

"dont think, just do" 🤣🤣 facts

[@Sammywhat]

Picturing Greg's mutiny I had an immediate image of him standing in that Captain Morgan pose! 😄🏴‍☠

[@roberthowell8303]

Yes Kyle "you are the greatest ". Looks great guys, love the extra hips on the ends.

[@Dozz70]

"Sponsored by Stabila". Greg Holding the Cup and Level and Smiling at the camera was Classic! Loved It. LMAO

[@robertlaird6746]

Thanks for fixing the audio on this video. Now I'm hoping to learn something new today. You two do a great job teaching us how to build quality post frame structures. I'm about ready to go down to the county with my plans to get approval. I hear that it takes about eleven months for approval which really sucks. You should do a video about the process of approval and what it takes. That I think would really help people.

[@jeffdickerson9268]

Nice work! Kyle for hip measurements revise the run from 12 to 17 and no math is required for converting from the 12 run. You may know this and prefer to do what brought you.

[@joebinion1]

I really like how in depth but yet simple to understand the orocess of building along side showing and explaining the math,GOD BLESS

[@TheDWZemke]

18:00 glad your thumbnail shows the answer.

[@tonynewton7902]

Amazing work as always guys. 👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@donmadere4237]

From one contractor to another! Great job on the porch and hips!

[@RRBuildings]

Thanks 👍

[@Pwpapa.7]

That looks awesome Greg did a nice job.😎🤷🏼‍♂️😂😂😂😂

[@robertlaird6746]

Dammit, I thought you were going to build it with a detail above the front door like Greg suggested. I agree with Greg in that it would look supper good.

[@idahonewt3231]

The bevel on the top of the hip rafters is called the backing angle. It’s the dihedral angle, which is perpendicular to the hip, cut so the top centerline of the hip is the intersection of the two roof planes.

[@samwoo7935]

Wow! You guys frame that porch like making fine cabinetry! Thanks for all the details.

[@robertnorris1808]

Beautiful job that blends so well into your main build. Your detailed step by step narative and the excellent video makes watching this so informative and fun to watch. You and Greg work so well together and your video man catches every little detail of the work and fun you guys seem to have . Another super video and enjoyed every second of it. Again this is a beatiful and well done shop build. Thanks to all of you for sharing.

[@user-vr8gd7eq9s]

fun to watch…really admire Kyle accepting that last hip without complaint, i imagine Greg did too. most important, it looks great

[@EdwardTilley]

What a difference that a porch makes. Great video and tutorial guys!!!

[@freddien7]

Another great job, Thanks for showing the whole 1hr video, Great Job guys.

[@mcchupka9718]

Looks phenomenal! Great job guys!

[@TheMrdude1234]

Good Mornin" Great videos like always

[@hallenw]

WOW! That porch looks AMAZING!! ❤❤

[@Ninoy2059]

Wow, I never seen anything done so precise. Job well done. 👏👏👏👏👏

[@vb3492]

C’est des artisans de folie, leurs boulot et exceptionnel , bravo! 👍👏🤩

[@staudtj1]

Kyle and Greg do Factory precision work . . . On-site. You Guys really do work by the Numbers.

[@daveshepherd7582]

Wish my hips were that purdy 😂 nice work guys!

[@robbjerls2252]

Wow, just wow that’s amazing beautiful work. Thanks for the content.

[@davidmaier343]

You’re right the porch makes it all come together.

[@Prowler1963]

Been watching for years, and still learning , thank you for the great content !

[@youtubasoarus]

Been following this build for a while. This is turning out beautiful!

[@taylorsand]

The power of friendship bit! That was awesome!

[@richhansen8617]

Great episode, it was nice to get off the roof. The porch looks great as always.

[@outfitr9703]

What a building. That porch is gorgeous.

[@hutchdw77]

Mighty fine work, fellas.

[@AngelLuisTrinidad]

That porch looks perfect. Excellent work guys.

[@nicoquattro3950]

YES DUDE, a one hour video. And Im not even 2 minutes in and I see the Makita dust blower. Nice.

[@mitzibud6908]

Amazing!! Another awesome video!! Thank you!!

[@mcmozzo]

I keep a spring loaded centerpunch handy for drilling into concrete/masonry. Start with the center punch to place an accurate divot for a drill bit to start and not walk around, drill a pilot hole and increase hole size as needed. This is probably overkill for a lot of general tasks but is excellent for accuracy in finish situations i.e. mounting a TV to a concrete wall and not having to deal with the bracket leaning one way or the other because a drilled hole jumped off target by 1/16th" or 1/8th"

[@scotpettengill7801]

Wow, you are really a great carpenter. Your skills are freakin spot on, and your foresight is incredible. Thanks for taking every step you take. I see so many things that I have such a difficult time with, and can see the errors that I have made and why I made them. I originally felt that you were just being super anal on how you did things, but now I see that I just never took the time to get things right. Greg is lucky to be working with a guy such as yourself that is willing to do things right.

[@RRBuildings]

Appreciate that man… I think I’m over anal sometimes

[@MikeSTGL]

Looks great !

[@MrScottr1958]

The porch really does change the look. Very nice.

[@mikedeboer7635]

that looks sharp, Nice job Kyle and Greg.

[@ScottyLo]

I’m always impressed with the quality and attention to details. Love the Simpson ties and the cost is a little high but at least it’s a clean look

[@fjeinca]

I lol’ed well when Kyle sped up himself mockingly saying, “Kyle you are the greatest!” Your occasional self-deprecating humor is one reason this amateur home contractor keeps watching. 👍

[@fjeinca]

Two other quick points: 1) I love how you measure and check reference points often to stay on course-the resulting build is bang-on (no, I’m not English). 2) I priced 2” thick rockwool: way out of reach for me! Your shop might as well have a gilt interior.

[@BraxxJuventa]

Awesome progress guys! 😁👍🏼😁👍🏼

[@erniebrossart6855]

Just Beautiful!

[@toddmusser8555]

The hips on that porch really make it look awesome! Those angles make it mind boggling. If this construction thing doesn't work out maybe you could teach geometry.😵‍💫

[@basembarakat]

beautiful hip roof

[@SpaceflightSimulator]

Gegs belt is even thight on himself 😂

[@ColbyPowell93]

Awesome build. Very nice detail on an already cool build

[@pseggons9512]

HQ is looking so god AND you make it look so easy.

[@neoman7479]

sweet addition to the shop!

[@joelereeves]

I watch the version with Bad Sound and turned closed captioning on. some humorous additions by KZbin when Kyle was using the saw, it showed Music or Applause.

[@danielharsh7698]

You do such good work, way to go.

[@ransomtester5347]

Good afternoon Great week 👍👌👍

[@gametime5726]

Just awesome work.

[@mopar6manbrad390]

Looks so good.

[@WreckDiver99]

@7:01 I was waiting for "Wonder Twin Powers Activate". LOL

[@alanblasczyk1779]

Very nice porch addition gents.

[@9ballz]

Master Class. Freaking sweet!!!

[@josephrussoniello1623]

Wow nice work love your videos 👍

[@scottpaulson1714]

That is such a good lookin building

[@BK-fy2xi]

Beautiful porch build brother. I would learn a lot if you explain how you figured your hip measurements and cuts.

[@fabry400]

Eccellente lavoro!!!

[@bradleynevills4444]

Looks great brother

[@derektowery8884]

I draw everything in CAD before I build. Including steel bumpers on trucks. It's a handy tool.

[@alk7142]

Very nice

[@johnrobinson8364]

Hi I would never build anything like you build but I enjoy watching your video's

[@earlsmithson4749]

Outstanding Young Men

[@ffbells]

42:20 Kyle’s worker’s comp agent covers his eyes.

[@davewilliams639]

You guys rock!

[@user-js5mz3wf6p]

Good cut I like it

[@motorcitycraftsman]

Kyle, I can take a look at the CAD drawing that you are wanting. I'm a designer and I have experience with several CAD programs.

[@dansullivan2954]

Well done gents!

[@bryansmith3353]

That is a master peace

[@nucopia]

Wow Very impressive well done

[@BrickyardPowerMan]

I'm heavily invested into Dewalt tools and Milwaukee pack-out. However, I would absolutely consider Makita if the situation warranted it. Consider it the Toyota of tools. Reason I didn't start with them as they don't have as broad of a portfolio though it seems to be growing.

[@beetleclemens3727]

She's a very great idea have you ever thought about wedding all the concrete down with warm water before you drill there'll be no cracking give it a try this is our opinion

[@AaronHope_Sow]

"The power of friendship"

[@markshade659]

Awesome!

[@kevincorbin6273]

It’s 4/17 pitch for the hip cuts the 45 diagonal of 12” is 16.97”

[@donniematz]

Happy to do some CAD detailing for you.