Nibbi Carb Better Than a Mikuni?

both of my brand new engines that I've bought in the last year I had to put a nibby carb on because the carb was either so far out of whack in it's settings that I couldn't get it adjusted in The Sweet Spot to run, or the other carb wouldn't run unless the choke was on, and I don't know how to give it more fuel... it was direct shot right to the carb so both of my bikes I couldn't get to run, checking everything I could, replaced parts and throats, gaskets, all kinds of stuff wasting all kinds of time. I bolt on a nibby carb second pull runs like a champ so I'd have to say Mikuni can suck em. NIBBI FOR THE WIN!

[@Deucealive75]

The last VM22 clone kit I got was $20 from Amazon. The intake was a POS but the carb alone is worth the $20. I have used them on stock and built engines. Once tuned they work fine.

[@559Minibike_Avil]

This might not be a big factor but that filter that comes with the ghost kit is supper restrictive my bike was running perfectly fine with a genuine makuni and a cheap Amazon filter until I whisky throttle the damn thing so I went and “Borrowed” one from harbor freight and that price of crap bogs top end now I got a nibbi on her and she runs better then ever!

[@Cereal_Killr]

Just bought a pit bike, Mega moto 212 and decided to go with the nibbi. The color n looks of it are way over the mikuni too. I went 24mm nibbi...thinking I'm gonna be happy! Good video

[@MediaHound-y8i]

Very Nice gear !

[@jamesa6272]

I bought 2 vm30s for my rebel 450 motorcycle. Tuned it all summer long and had no luck at all with it. When I finally got it tuned right to run great it always stalled at idle. I spent over 100 bucks in jets and countless hours jetting it. I put the stock carbs back on and the bike ran great. I’m very very hesitant to buy a mikuni or clone mikuni for my Baja.

[@rockman49er]

Today is my second day trying to tune my vm22 carborator it stalls at the high end i hope i figure this out because its starting to piss me off

[@ephenj]

What did you go with for jetting? From everything I can tell they are basically a copy of a real Keihin pe24mm carb. The differences come down to different emulsion tube, floats, main jet, bottom cap, and needle from what I have been able to find out so far. I have run the pe24 on my tilly 212 modded but the idle screw broke and just picked this 24mm nibbi up.

[@northminibikes]

35/118

[@JackWithDoodles]

Nibbi carbs have great power and response but are hard to tune.

[@got2getit204]

Yes sir I’ve never bought a makuni because the NIBBI is just that good I mean there is know comparison if you know you know!

[@ephenj]

BTW I totally agree with you that those are terrible carbs to tune they are what hit the pit bike scene 20 yrs ago and they are still here 20 yrs sucking.

[@jensenbeachjay]

What size carb you running on the tillotson 212?

[@northminibikes]

Pwk 28mm nibbi

[@rcaddictgarage]

I gotta try me a nibbu carb now!!

[@GoodFellasMiniBikez-GFMB]

I feel the same way nibbi all the way

[@henrythompson5624]

Do you have a like for the handle bars

[@northminibikes]

search ebay for 12in apes

[@henrythompson5624]

@@northminibikes thanks respect

[@Jaws56dog]

It wont work cause you put the studz racing sticker on it

[@northminibikes]

@@Jaws56dog I hear that!

[@Jaws56dog]

@@northminibikes i live right by their store in taylor michigan, they will sell you the wrong shit all the time, like the cheap gps mikuni knock offs but they will tell u its a real mikuni in store🤦

[@northminibikes]

@@Jaws56dog agreed, I don't buy from them unless I absolutely have to.

[@GoodFellasMiniBikez-GFMB]

Try the pwk nibbi 🤫

[@northminibikes]

Yes! Just ordered one of those!

[@the_bablo2959]

What size carb is that?

[@firebadgergaming903]

Where did you get the frame for the white bike?

[@northminibikes]

It's a Coleman bt200x

[@matienne]

So would you recommend this nibbi carb for a 200cc engine ?

[@northminibikes]

Yes

[@got2getit204]

Fk yeah don’t buy anything else!