Fumoto Oil Drain Valve for the Raptor : F150

We install the Fumoto oil drain valve to reduce the mess of the oil changes.
Get one, link on our amazon page:
Support the Channel by visiting our Gear page on Amazon:
www.amazon.com...
Follow us on:
Instagram - / keepitdirty_offroad
TikTok - vm.tiktok.com/...
Music: www.epidemicso...

[@scoop4321]

I installed the Fumoto oil drain valve on my Ford Ranger, and I really like it. Less mess. One bonus item about installing this unit is if you accidentally overfill your crankcase, you can EASILY drain off a little until the level is right. By the way, you really should put some jackstands under the truck if you are going to crawl under it. Don't rely on the jack alone to hold it up.

[@KeepItDirtyOffRoad]

Lol. Jack is not holding the truck. All it’s doing is leaning it so that we can get more oil out. We fit under there and can work freely without any jacks

[@traxiii]

The one on my Mustang and my old 1990 F150 didn't come with the plastic lock, but I never had any issues with the valve ever. The 5.0L in my old F1 had a Milodon 8 qt. oil pan with dual sumps, and 2 drain plugs. I left a short piece of hose on the forward one, just long enough to clear the cross-member that it would normally drain on top of without the valve. They made super easy and I could drain both sumps into the same pan, at the same time without making a mess. Highly recommended!

[@pmurphy12667]

got this years ago and love it. Have it on all my vehicles

[@sixshooter4570]

Grab some 3/8" tubing to make it real easy to direct the flow while draining the oil. You can get a nipple plastic cover for the Fumoto Valve or tubing if you decide to use tubing from any hardware store.

[@KeepItDirtyOffRoad]

Yeah planning on getting them from the hardware store. Not getting the kits online. Charging way too much for like a $0.25 cap and $2 worth of tubing

[@M3ichael]

Can't wait for the next oil change it's going to squirt out so good. LIIIIMMMMMEEEEE GRRRREEEEENNNNN! Truffle Shuffle FTW!

[@KeepItDirtyOffRoad]

🤣🤣🤣🤣

[@M3ichael]

@@KeepItDirtyOffRoad sent you PM on Instagram

[@scott_b1]

Been using on my 2018 raptor since new.....pro tip.....keep a 5 quart bottle from your last fill. Go to home depot, get clear plastic 3/8 tube to connect from the valve and run down into empty 5 quart jug. Darin. Replace with new jug when full, recycle the oil. You never have to get the oil drain pan out again.

[@KeepItDirtyOffRoad]

Excellent tip!!! Will definitely be doing that. Threw away my oil pan after this one. Such a mess. Will definitely be doing this in the future.

[@danperez3970]

what about the filter change though? you most likely will need the oil drain pan for that though...

[@KeepItDirtyOffRoad]

Of course, but an open pan works better than this crap closed pans. And they leak like crazy when you take it back for recycling. I have 2 open pans now for different applications and make far less mess and easier to transport the oil

[@Blue_Flame_Raptor]

Jiffy lube will still find a way cross thread it🤣🤣

[@KeepItDirtyOffRoad]

🤣🤣🤣 I’m sure they will.

[@dontask8979]

@@KeepItDirtyOffRoad They will toss it in the trash, charge you for a new one, and cross thread the new one. Then make sure its all topped off with ATF and you will be ready to go👍

[@zerocoolmz]

any follow up video coming on this?

[@KeepItDirtyOffRoad]

I’ve had it on the truck 6000 miles and it worked out great but we did not get a chance to properly long term test it. Truck had way too many issues and we are getting ready to sell it.

[@zerocoolmz]

@@KeepItDirtyOffRoad thanks for the info.. putting it on my wife's Explorer with 3.5 ecoboost this week with oil change

[@KeepItDirtyOffRoad]

Make sure you get some tubing at Lowe’s or Home Depot before you install it. It’s a funky size and you want to get the right size and leave a section of it in your tool box or with your oil filter wrenches.

[@zerocoolmz]

@@KeepItDirtyOffRoad thanks I just went ahead and bought valve tubing and cover cap all in one order on amazon together to make life easy. thanks for the info and great vids

[@bigvan98]

Is this the same thread size for 2012 f150 5.0

[@KeepItDirtyOffRoad]

No clue. You need to check Fumotos website to see if they make one for the 5.0

[@جبرنيالوقت-ك2ط]

What is the valve size, and does it fit the 2017 Ford Explorer?

[@KeepItDirtyOffRoad]

You need to check the manufacturers website.

[@CarlosAMolina]

Hi thanks for the many videos. Can you tell me how to change transmission and engine mounts on a Gen 1 (2012)?

[@KeepItDirtyOffRoad]

That’s a big fix man with lots of extra tools and lifts. Well outside what we can do man. Transmission mount I would imagine is easy enough. But engine mount that requires a hoist is well out of what we can do man. Sorry

[@outkast7991]

The part I make the biggest damn mess of is when I pull the old filter off.

[@KeepItDirtyOffRoad]

Yeah. Always messy.

[@cparkerz2968]

Do you think not having the magnetic drain plug could be a downside to installing this product I have never had metallic particles on mine changing the oil but it does seem like good insurance to keep particles from circulating through the engine.

[@KeepItDirtyOffRoad]

Magnetic drain plug can’t catch it all with the pressures the oil gets out thru. It’s really just a way to let you know there is a problem. Not catch it all. If there is a problem, you will see it come out regardless

[@vietcong411]

How is burning oil normal and typical?

[@KeepItDirtyOffRoad]

All modern performance engines burn a little bit of oil. Some more than others. Rotary engines burn the most and part of the normal operation. All turn engines, burn a little bit of oil as part of their normal operation. Some NA engines even burn oil and you have to check the oil level regular so they don’t run dry. It’s how some engines work and surprised you did not know that.

[@ChromesConsoles]

are there headlights like the ones you have on your raptor for my dad's 2010 Ford Raptor SVT? (typo)

[@KeepItDirtyOffRoad]

Yes there are. alpha Rex makes a nova series for the Gen1 Raptors

[@ChromesConsoles]

@@KeepItDirtyOffRoad Thank you!

[@matthewcamargo9175]

Do they have this for a gen 1 ?

[@KeepItDirtyOffRoad]

Yeah, one of the first things we installed on our Gen1.

[@TheHAZMAT221]

Game changer for oil changes. Love mine!

[@KeepItDirtyOffRoad]

Totally agree. Now if we could make the oil filter replacement easier. What a pain.

[@douglasgreen437]

Good job..

[@kenrivers9757]

Come on guys, you did a great job but with that beautiful CLEAN, WHITE driveway. Its a given to put an old towl down or cardboard on the ground as well, under the filter and drain plug lol

[@KeepItDirtyOffRoad]

We always make a mess regarless 🤷‍♂️🤣

[@Smllc22318]

“Mud will get in here and turn to rock and we will never get this off” Mud takes millions of years to harden into rock possibly 10’s of millions of years. I think yer good homie.

[@KeepItDirtyOffRoad]

You must not have experienced desert mud. Literally turns to rock and takes a ton of work to remove.

[@osvalditochirino3428]

My mechanic advised me to change that oil every 3k mile he knows I do it myself he’s a Ford race type mechanic told me the turbos cost 6k and changing will prevent that. From going bad fwiw

[@KeepItDirtyOffRoad]

IMO that’s the old thinking from the good old days. Oil quality is much higher these days and at 3000 miles, the oil has not even broken down for regular use. Race applications is different. In a race vehicle oils get changed out every single race. Even the shocks get rebuilt every single race. So there it makes sense. But in regular driving and occasional off-roading, every 3k miles is wasteful.

[@osvalditochirino3428]

@ I’ll take the xtra 150 insurance the Exxon Valdez poured more oil than we would in a lifetime times couple million and I mine as well use that 40 dollar fumoto for a reason change that oil the maker of the gtr engine says 2k max to make it last long and he’s not a novice turbos 6k remember that

[@KeepItDirtyOffRoad]

That’s a different engine type all together. High tolerance engines need more frequent oil changes. It’s basically a race engine and most don’t even idle right until they are up to temp. The engine in your truck is not that. Earlier I would do is every 6000 miles with heavy off-roading. You’re not getting any insurance or extra protection by doing it at 3000 miles. You’re just wasting money and oil.

[@johnmorrison8351]

Some Raptors have plastic oil pans and can’t take a Fumoto

[@KeepItDirtyOffRoad]

Yeah the 17s and some 18s have the plastic pan and a company called Ronin makes a plug options that functions in the same way.

[@AStanton1966]

@@KeepItDirtyOffRoad I put the Ronin on my 2020 Mustang GT with its plastic oil pan. Nice system, the Ronin. Recommend it highly, no need to replace OEM drain plugs/O-rings down the road during this time of supply chain shortages.

[@flash1034]

Do 5k oil changes. Your turbos will thank you.

[@KeepItDirtyOffRoad]

I’ve talked about this topic many times before man. I have not found any supporting info to show me I need to do 5k oil changes. Oil was in good shape here, my last truck I did 10k oil changes and never had engine problems, this truck is doing the same. With the high quality oils and how thin this oil is, anything under 6k oil changes is a waste

[@donrollo7329]

@@KeepItDirtyOffRoad I call oil / filter changes Cheap Insurance, so I change it every 5,000 miles plus tire rotation

[@tundras4ever552]

@@KeepItDirtyOffRoad That is why you are burning oil lmao. piston rings are clogged!!!! nothing you can do at this point. carry on

[@KeepItDirtyOffRoad]

🤣🤣 🤣

[@DanielJohnsonGooglePlus]

@@tundras4ever552 just thought I'd add a comment on the oil loss, in 10k miles it's likely from the PCV system (likely only enough to make it "a little low" and not critical loss that would effect anything. You can see the oil lost with an oil catch can on the PCV system but without it it's burnt off when it's cycled back into the intake.

[@nniinnoo2]

How is it holding up

[@KeepItDirtyOffRoad]

Held up Ok. But we only got one oil change out of it before the truck started to have major problems so we had to get rid of the truck

[@nniinnoo2]

@@KeepItDirtyOffRoad are you going to put them on anything else and do you thing it would work well for offroad crawling

[@KeepItDirtyOffRoad]

Yeah, putting one on the new truck at the next oil change. Should be fine with any offroad rig as long as you have skids yo protect the area

[@nniinnoo2]

@@KeepItDirtyOffRoad ok sweet thanks for replying so fast

[@Juanitoabusadorcachondo]

with that you will leave 1/4 of oil inside

[@KeepItDirtyOffRoad]

You can’t ever get all the oil out. We let ours sit for about 30 min and she was still dripping. Point is to get as much out as possible and with the valve we won’t have to worry about extra messy oil changes anymore and could also sample oil between changes without draining the whole pan.

[@DETAILDENNIS]

Mr. Muro love the video as always. Check into the Valvomax stainless oil change valve. Test one out . I believe it is a way better design.

[@KeepItDirtyOffRoad]

In some ways yeah it’s a better design. It has a build in dust cap, draining rate could be adjustable, and it’s a more complete kit. But it has a few drawbacks. The dash cap is a hand screw type and can easy come off with offroad vibration. After some time I could see the cover getting stripped from over tightening. If the cover does come loose, I could see that ball getting gunned up and possibly leaking. But it’s biggest drawback Is cost. almost double. And now you have an extra part to carry around if you want to drain the oil.

[@vietcong411]

Do not over tighten it

[@KeepItDirtyOffRoad]

We tightened per the manufacturer instructions

[@billolah1372]

U should put a wrap or two of Teflon tape on those threads before u screw it in bro . And find a rubber hose to slip on the end of that valve long enough to reach in the tray to easily drain the old oil out .