Рет қаралды 15,203
How can we create a spout on a beaker using surfacing? The spout not only needs to protrude out but taper down as well. We also have the challenge of blending the spout smoothly with the adjacent faces.
Link to post:
forums.autodesk.com/t5/fusion...
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360BeakerSpout
0:00 Intro
0:26 Cylinder
0:45 Surface trim
2:28 Spout outline from the top
4:44 Tapering of spout
6:26 Spline to control spout bottom
7:20 Loft
8:35 Stitch and thicken