Fusion 360 | How would you model these?

Рет қаралды 29,749

Күн бұрын

How would you model these bike lugs?
Disclaimer: This is a conceptual exercise in creating a certain shape. The workflow show here is not meant to create manufacturable bike lugs. Please adapt the workflow according to how you want to manufacture the parts.
Link to Reddit post:
/ how_would_you_model_th...
Link to starting file:
a360.co/3QZynbi
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Disclosure: Autodesk has kindly sponsored the full version of Fusion 360 that is used to produce the videos on this channel. That being said, Autodesk has no editorial control over the content on this channel. I am still an independent creator with the aim of creating videos that help viewers in using Fusion 360. These videos are not meant to promote Fusion 360 as a product.
#fusion360school
0:00 Intro
0:29 Defining the extent and creating the base faces
2:15 Loft
4:29 Trimming
8:04 Stitching and thickening
9:38 Rib

Пікірлер: 32

@Liris777 7 ай бұрын

I have no opportunity to become your patron, but let me say thank you so much! Very useful material! Thanks a lot again!

@YCM30cnc 7 ай бұрын

Nice work! I agree with other commenters that this is VERY helpful in learning to use the Surface modeling environment ( something I have not tried to use in the past, but will try to very soon).

@CraftPlayEnjoy 7 ай бұрын

I always enoy to watch your videos, even if I know presented tricks. You show technicall stuff in a really informative and easy way :)

@tijnieken Ай бұрын

"I am not familiar with how these lugs can actually be manufactured" :D

@akselbering291 6 ай бұрын

These would very likely be die casted parts, you'd 'only' need to worry about how the mold can come apart again. Despite what might look like a welded seam in the back of the ring 0:13, would it be impossible to draw a flat sheet out into the sharp ridges. (They'd just crack with that tight of a radius) That along with the consistent thickness of the edges, the rough and pitted finish (especially pronounced at 0:09 and 0:11 on the inside ring) and copious amount of stretching that'd be required to make the sharp internal corner between the two pipes happen. My 'expertise' is in sheet metal not die casting, so I can only confidently say they weren't made from a flat sheet and forced into that shape.

@istvanbuzas9152 24 күн бұрын

Köszönjük!

@jakubbecker3407 7 ай бұрын

Great video, usually lugs for bicycle framebuilding are cast :)

@jeanpaulroche4170 7 ай бұрын

Excellent video with perfect diction.I built the model without difficulty using the starting file Thanks again for sharing

@Fusion360School 7 ай бұрын

Thank you. I don't really get a lot of feedback on viewers downloading the file to follow along. I often wondered whether users can actually download my file to use. So this is reassuring.

@kwaaaa 7 ай бұрын

Another excellent video. Very helpful in exploring how to approach a design challenge, I always learn something new from you.

@hackaxl 7 ай бұрын

Excellent video. Exactly what I was looking for, so a huge help. Thanks for putting this video together.

@Jake-zc3fk 7 ай бұрын

You do very excellent tutorials! Please keep them coming.

@jonpendleton1007 7 ай бұрын

Very clear and well explained. Excellent 👌

@stefanguiton 7 ай бұрын

Excellent work!

@modernmakes 7 ай бұрын

Great video, thank you!

@KokayMate 7 ай бұрын

Superb!

@americorosales2085 7 ай бұрын

Thanks like the other tutorial are great, I learned a lot,.!!!!!

@DanteEhome 7 ай бұрын

Depend on the cut shape this can be very easy or very difficult. If I would cut the profile like the top side, if extrusion cut is not enough, I will first find the center of the profile as scale reference, sketch the outline, make a surface body, scale it with the center, to create a profile perpendicular to the lugs.

@DanteEhome 7 ай бұрын

Also based on your workflow I don't think it's necessary to use face body here.. Just cut pipe-like structures using extruded profiles will be good enough. Also for the loft can just use join and fillet, if the shape does not have to be 100% accurate.

@seabreezecoffeeroasters7994 7 ай бұрын

Another great video 👍Getting to the stage FINALLY where I choose to use surface modeling because I like what it can do instead of something I used to suffer with or avoid because of your content 🤣

@piranin666 7 ай бұрын

gracias

@mldemigod 7 ай бұрын

respect :)

@Pauly365 7 ай бұрын

Just cut and weld the pipes - the lugs.

@rollcontainer 7 ай бұрын

Hey everybody, does anyone know how to rotate the sketch of the ellipses? When i try that, it skewes the cutout instead of cutting out at an angle...

@parkermusselman9824 7 ай бұрын

Wonderful video as usual. How did you create those ovals at 20 degrees? I don't see any construction geometry like from a "Plane at Angle" command. Thanks!

@Fusion360School 7 ай бұрын

Thank you. I actually drew straight lines and extruded them into surfaces to be used as sketch planes. I have always found construction planes to be a bit of a pain to create. That tool is not intuitive to use at all, at least for me.

@DanteEhome 7 ай бұрын

@@Fusion360School After using other tools like blender and plasticity I also find the costruction plan hard to use. Even the one in the mesh editing menu is more friendly, all you to move the plane in axis while performing cuts.

@parkermusselman9824 7 ай бұрын

@@Fusion360School Thank you for the response. Interesting work around. I com from a manufacturing background and the planes make sense to me as machines and CAM programs rely on (mostly Z) planes. You could create a plane rotated about the axis of the tube by first creating an "Axis Through Cylinder/Cone/Taurus" and then using that geometry to drive a "Plane at Angle".