FX Masterclass : Crown Reassembly - Part One

[@1960fusion]

I learn something new everytime i watch Ernest reassemble an FX airgun...thank you for sharing such valuable information!

[@HDHD-yv9np]

Fx. Thanks a lot for taking the time to make this video available to us. Very nice of you looking after your customers, we love Fx 😁

[@hobastank659]

thank you so much ernest

[@BullseyeBob]

Thank you Ernest and FX!!!

[@brettwilliams8837]

Hello, my shear continues to over travel or the hammer is just hanging up on the shear. Please advise

[@Lorwildrose]

What's the AMP reg all about? What's so special with it? My manual doesn't mention anything different about how it functions from the old ones. Just wondering, at first I was experiencing pressure creep but after dumping the air and resetting the pressure a couple of times it's working fine. Thanks for your videos Ernest.

[@tomvanginkel1977]

thanks FX For the good instructional video can one also obtain the auxiliary tool somewhere?

[@FXAirguns]

Call [phone] to order custom tools.

[@tomvanginkel1977]

Dear FX and if you are from Belgium

[@petter5721]

Tom Van Ginkel Use internet order

[@rastislavkrizan1847]

well thank you It helped me a lot

[@jamesdafolhamendes9101]

SOS, PRECISO DE AJUDA, MINHA CROWN VEIO COM V.OUITO BAIXO E NAO CONSEGUI RESOLVER O PROBLEMA... A DISPARADORA TÁ SOLTANDO AR NA HORA DO DISPARO, PELO DOIS FUROS QUE FICAM A BAIXO DO MAGAZINE.

[@vectorkimo3447]

Thank you very much great video ernest. One question regading the hammer. Is it exactly the same part for the wildcat mk1? Since it has the same part no. Which is 19039

[@ernestrowe927]

Yes, it is the same

[@jeffdarby470]

I have added a stronger hammer spring to my crown.. it’s shorter than the old one, sub 12 one. Now when I look through the hole to see the valve head the hammer is not under constant contact with the valve it moves a few mm’s back and forth. Is this acceptable. The valve is not under pressure at this point and no reg is inserted.

[@marcog.5410]

detailed but overwhelming 😱 I don't know if I can go that far

[@hamzapechca]

Thanks lot.we are waiting for video explaining all kinds of barells . Liners. Projectiles in all calibers. Harmonic. We need to your experience.

[@FXAirguns]

Thanks for the suggestion, will add that to the lineup!

[@HDHD-yv9np]

@@FXAirguns Video about liners and barells A vs B vs slug STX will be very helpful and will take the confusion out many FX lovers mind :) , we are looking forward for this video FXAirguns

[@atnshooter8602]

Dear FX! I have a problem with FX crown (leaking) and I bout it online. The shop located in Netherlands and I ordered into Austria. Austria is not a big air gun nation. Everyone use Styer or Glock(handgun).There is a distributor in Austria but the shop is not relay take care of air gun support (there is no business interest). I decided that I will manage the service by myself. For that reason I need a tools. The 3 special tools are need regulator piston, video masterclass disassembly 6.40 min.(the small plastic tube).The other on I need is ( Tweezer with grove) minute 8:18 same video.The 3rd one tool is in the video reassembly part one 15:18 min. I would like to buy this tools to make the job as it needs to do. FX already have this tools and the factory definitely can put together a service tool kit package to send it to me because the service is not available in Austria! The Distributor mentioned by phone conversation that anyway send the air gun it to Sweden to preparation. I hope somebody will help me to get these tools.

[@farooqjamatee]

Great sir

[@ziauddinsohel6004]

FX is my no 1 choose how can i manage it.I am bangladesh. plzdetail me

[@ZoVakVel]

Is it legal to carry these airguns on aeroplane? Do you have distributors in India? How can we buy FX air rifles in India?

[@HDHD-yv9np]

Yaaaaaay finally hahaha

[@HDHD-yv9np]

First comment hehehehe