G Body El Camino Restomod Fuel System Part 2: Tank prep

Short video. Finishing up sending unit and securing it in the tank, Doreman tank unboxing, cleaning up tank straps, and G Body Parts tank strap insulator review.
Music:
TV Drama Version 1 by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/
TV Drama Version 2 by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/

[@820performancecomptonbro4]

You have part number for sending unit with pump. tank from gbody part?

[@g3garage]

Great video Josh. I've been researching these tanks and sending units. One of the forums mentioned that is you use a EFI sending unit for these El Caminos on a 22 gallon tank the fuel gauge will be way off. Did you find a solution for this?

[@CarsandJoshee]

I’ve been told by gbodyparts.com tech support, who is running the same setup, that the only difference is that when the gauge shows “Empty” you’ll actually have 5 gallons left. I’m fine with that.

[@g3garage]

@@CarsandJoshee Makes sense, thanks for the info!

[@gregcowan4477]

Link for sending unit please?

[@bos-G-state7359]

Im replaceing the sending unit in my 86 Monte Carlo but it only had two lines and the new one has three like the one you have my question is which lines do I use

[@CarsandJoshee]

The sending unit with three lines is for fuel injected vehicles: feed, return, and vent. The two line sending unit is for carbureted vehicles: feed and vent.

[@kentwayne5818]

Did you get your fuel gauge read correctly with the 17 gallon sender in the 22 gallon tank?

[@CarsandJoshee]

I’m still in the build process. I have wiring and interior to finish up.

[@kraz18]

Did your sending unit came with the fitting already on it?

[@CarsandJoshee]

Nope kzbin.info/www/bejne/qHSbaKGOfrVnbrs

[@mrlara57]

What brand , part number is that fuel pump/sender ?

[@CarsandJoshee]

Pump is a Walbro 450. Sending unit is from gbodyparts.com gbodyparts.com/camino-fuel-sending-unit-p-3092.html?osCsid=15024ba674a50838494bf0d9fd6efb9f

[@Dymondlsswap]

What fitting are you using on sender

[@CarsandJoshee]

kzbin.info/www/bejne/qHSbaKGOfrVnbrs

[@thomasfoster5200]

What fuel pump did you use what brand

[@CarsandJoshee]

Walbro 450

[@michaelbarnes2937]

Let me know if you have any problems pumping fuel and the tank

[@buddyrebel_Garcia]

Are you in Victorville or somewhere around there.

[@CarsandJoshee]

I’m in TX, DFW.

[@buddyrebel_Garcia]

@@CarsandJoshee oh ok , thought I saw cali plates.

[@hosscaddy]

How long did it take to get your parts? I ordered my tank and sending unit from Dixie restorations awesome guys. I ordered at the end of January and just got the tank yesterday the sending unit is still a week out. It’s for my ls swap in my 85 elcamino

[@CarsandJoshee]

I think it took about a week to get everything. I got the sending unit, pump, and tank strap isolators from gbodyparts. I got the tank from rock auto.

[@hosscaddy]

@@CarsandJoshee yea I was told both the tank and sending unit was on back order I didn’t order the tank from rock auto because I couldn’t verify that it was baffled or not

[@CarsandJoshee]

@@hosscaddy yep, g bodies are getting more popular every day. I’m trying to get my parts and finish my build before I run into supply issues.

[@hosscaddy]

@@CarsandJoshee I’m close. Waiting on my harness to be built then I can drop the engine in. I’ll have to modify the trans crossmember

[@thomasfoster5200]

I have a 79 El Camino i am prepping for LS swap. Could you tell me.what tank and fuel pump is most compatible for my car. Plz and thank you.