G Scale 3-Truck Shay Bachmann Battery Power Conversion Update

[@Shane-Singleton]

That's a nice looking beast. I've always loved the Shay style locomotives.

[@SGTGhost]

Great video Dan and John, I enjoyed every single video of this channel

[@nickbarman4145]

Great video like always

[@nickbarman4145]

Daniel Cortopassi yep

[@tp6212]

It's deja vu all over again. But I'd say those were some real improvements (subtle as they were).

[@tex-hogger4974]

Could you list all the components that you used to make it battery powered. I did watch parts 1 and 2. What a great series. This gives me the motivation to take my 3 truck off the shelf and get it setup for battery/air-wire operations.

[@tsgmultimedia]

Hi Emory, You need a receiver, signal booster, decoder, speaker, battery, wires, solder, and soldering iron. Of course, tools would make it all a lot easier. :)

[@scatheli]

@@tsgmultimedia Hi... simply great job. I have a 4-4-0 Bachman and would like to do the same. At first I wanted to go through arduino but as I own the ESU Loksound XL v5 with Dual smoke unit for 2 years but never installed yet. As my understanding, Does the "AirWire Converter 6.0A with Internal Antenna C-60r" replace the booster and receiver you mentioned in Part 1 ? In that case, and considering your diagrams, is it correct to say that for using battery only, your have to put your siwtch position to left and to connect the receiver/controller to the 2 bottom pins and 2 upper pins (upper replace the booster... ). Many thanks for your precious support and definately wonderfull job. Sorry for my poor English... I'm French...

[@scatheli]

Is this correct : i94.servimg.com/u/f94/19/07/38/52/connex10.jpg

[@nathanhartwell2783]

Jon seems you had some audio feedback in the background.

[@jdolguin8558]

Nice video I would like to have mor info how to change my trains 🚂 to battery power please

[@tsgmultimedia]

Two Truck Shay Battery conversion: kzbin.info/www/bejne/gniun4mmg5tnrsk Three Truck Shay Battery and Radio Control conversion: kzbin.info/www/bejne/d5jaioujmtedaJI kzbin.info/www/bejne/nmGxZ6yqacRnbM0

[@Hunter_Dawso]

Dan, do you have any HO scale SP SD40R or SD45R units and if so, have you thought of bringing one on Dan’s Models?

[@Hunter_Dawso]

I’m actually working on one of my own SD40R numbered 7351. The only problem is photographs have been hard to come by.

[@joesaurina1402]

Would really love to get into G scale, if I was Bill Gates that is. thanks guys great job

[@bigdaddy5179]

Taking a spike off the coupler height on the logging car.

[@tsgmultimedia]

Right? That was a great demonstration of why adhering to standards for coupler height is a good idea :))

[@lizardvlogger]

7:53 trouble some trucks anyone?

[@alpal.mp4]

I hear some people in the background

[@aaronwhitesell6418]

Overall, a great video but I'm going to take a spike off for the coupler height on the log car. Verdict: 9 out of 10 spikes. Just kidding, love your work!

[@tsgmultimedia]

Now you have seen with your own eyes why coupler height matters :)) By the way, it was Paul's fault.

[@ecpcharles]

A lot of echoing