G80 M3 EBC Brakes Racing Rotors & Pads Install!

To get our G80 M3 further set for track usage, we installed ‪@EBCBrakesUK‬ 2 Piece floating rotors and a combination of their RP-1 pads up front, and blue stuff pads for the rear! These gave a substantial increase in stopping power and we can't wait to show you what they can do on the track!
Rotors:
FRONT: www.bmptuning....
REAR: www.bmptuning....
FRONT PADS: www.bmptuning....
REAR PADS: www.bmptuning....
#g80 #m3 #bmptuning

[@JayAllDayM3]

For daily and aggressive street what pad would you recommend, yellow or bluestuff?

[@BMPTuning]

Yellow would be your best bet for the street/daily use! We haven't had any issues with the bluestuff and RP1 pads on the street, but they are definitely designed for the abuse given on the track! Lots of noise and brake dust!

[@M12MA]

Any calibration needed after any brake component change?

[@M12MA]

Or alignment etc

[@BMPTuning]

You shouldn't need to do any alignments or calibration after these pads and rotors - however there may be a brake service interval that you may want to reset in the cars computer! Unfortunately, we've sold this car, so I can't go check!

[@mdnajibulhossain5827]

For the caliper bolts where lochtite not needed? Also for the rear calipers did you have to put the car in service mode?

[@BMPTuning]

Factory torque specs are fine on hardware, yea you need to ensure the parking brake doesnt extend.

[@mdnajibulhossain3967]

@@BMPTuning how to put the car on service mode?

[@AJ_IS5417]

@@mdnajibulhossain3967 Bimmerlink