EXPOSED! Top 5 Times Mecha Gaikotsu was WRONG! 😯😯😯

[@MechaGaikotsu]

Support the channel! ----> Get Surfshark VPN at surfshark.deals/mecha Enter promo code MECHA for 83% off and 1 extra month for free!

[@themechaidiot]

I think italy vpn is better in times of quarentine IF YOU KNOW WHAT I MEAN

[@aaroncabie5175]

30mm kits review hype.

[@Takeshi--fi2zp]

Lol I love the fact you drink Chu-His too, literally one of my most favorite drinks from when I was in Japan for 3 years

[@nerdcore8819]

I have a youtube channel vortexking

[@yamatoizumii4614]

Hey need help which is better? Gundam astray red frame kai Or Rg unicorn gundam?

[@MrWTF-cs6jr]

*Finish making review Mecha: Sector is clear *Read comments Mecha: NOT CLEAR! NOT CLEAR!

[@yomama8212]

Respect to Mecha for not only acknowledging his mistakes but make a fun self roast video out of them lol

[@butthurts3546]

He forgot to acknowledge he's a very basic builder.

[@kshatriya1414]

Ashley J. You’re not wrong. That doesn’t mean that not painting your Gundam is bad but it definitely is basic

[@yomama8212]

Ashley J. I don’t think there’s anything wrong with that. He isn’t an expert builder, but he made very detailed videos with good editing skills that make them very entertaining and easy to digest. Besides, he doesn’t need to admit he is a basic builder, he has always been very straightforward and honest with his lazy panelining to sticker application.

[@rayyanrashid9441]

Ashley J. you clearly have not watched Mecha a decent amount because in his tour of Gundam Base he says that he’s a lazy and basic builder.

[@haidangben5015]

I shall ruin the 444 likes count 😈

[@eomersimbajon2938]

When you dont have haters that try to expose you Mecha: "Fine, I'll do it myself"

[@R_Caine]

That's what Thanos said.

[@PainXIII12]

No he has haters, I’ve seen them.

[@Jirujan]

he have haters, their comment just sink, or they just dislike the video

[@alexisrodriguez6526]

Boy you'd be surprised how many groups on fb are full of haters trying to illegitimize the fact that he's a builder

[@branchygiraffe]

@@alexisrodriguez6526 why? Because hes a straight builder

[@failed_K]

Man really got drunk and started reviewing

[@tydshiin5783]

I'd expect his voice to be a lot different or have hiccups lmao

[@mockingladmockery3860]

Dont blame the irish for their drinks

[@juliansw5044]

And yet that review is the most popular video on this channel

[@Verum_X]

Same

[@Mephiston]

For anyone watching this in the future, the solvent in nail varnish that melts plastic is a common solvent used in nail varnish, and is also a component of plastic cements such as Tamiya thin and Tamiya extra thin, and that is Acetone. Acetone is notorious for, and actually used to dissolve styrenes and polymer plastics. If you're looking for a nail varnish to use on polycaps and joints, make sure it is acetone/acetate free.

[@HeWhoSlayethCain]

Acetone dissolves so much....

[@vinceamaro1382]

oh, shit.

[@vinceamaro1382]

So ethyl acetate can melt plastic?

[@Mephiston]

@@vinceamaro1382 it can, you should always test it first.

[@vinceamaro1382]

@@Mephiston crapbaskets

[@emperorkiva8063]

14:01 hehe, aged fine

[@adampemberton7926]

fine wine

[@AangDknight]

Mecha Gaikotsu : Guys, can you point out my mistakes when I review something up to this point ? Thanks. Viewers : My time has come. *Proceeds to shoots barrages of Mecha Gaikotsu failures like a minigun*

[@RandomPerson-cm2wg]

Ah yes, the all famous mistake of calling force impulse gundam the destiny gundam.

[@brotherkhrayn3525]

Hehe, mistake gun go “brrrrrrrrrrt”

[@alexisrodriguez6526]

*calls in Mistake loaded A-10*

[@zacharyradford5552]

Genius.

[@gabrielbumanglag3303]

As for the 1:100 Lupus Rex, there are leftover joint parts in the runners that are not mentioned in the manual but are actually compatible, tighter and will hold the mace better in certain poses. Mine is 2 years old with rare posing (since I do not play with my kits) but the joints still hold the mace without any aid!

[@leolied6766]

1 view and 10 likes. Damn I'm must be high on gunpla crack addiction.

[@cloudy9622]

With the way you spelled out that sentence,I agree.

[@jmiller5806]

Can’t watch Japanese Netflix as it doesn’t offer English subtitles. So if you speak Japanese it works. If it doesn’t you’ll waste ya munny.

[@TheRedskys96]

Yeah found that out the hard way, even downloaded a plugin called Substitial to try and help, but NOPE

[@the7569]

Some shows have full english subs it's on a shoe by show basis

[@raihanmiftah6076]

10:28 Umm, how about when you rated MG Exia as 5/5 (in your 2nd collection tour), but gave it bronze tier in MG Dynames' review?

[@vissermatt1058]

i could be mistaken, but that was an over time downgrade? he seems to play with his gunpla a lot, the review comes out super fast.... a few weeks later he finds out that "stress test" that he applies to all his Gunpla equally will prove true or not

[@DudeOnASkateboard]

Just going back and rewatching some older Mecha videos, and holy smokes Batman, this aged like a fine wine! - 14:01 Mecha has since become Irish Ken Kaneki.

[@zeronolife5060]

i respect a creator for admitting mistakes. I love it when they get honest about it rather than cover it up or down play them. Then there are people like this that honestly admit mistakes and make it informative and funny. I appreciate the kind of man or machine that Mecha Gaikotsu is.

[@missmilky6677]

Im hoping they only cancelled the mobile game part of urdr's hunt, and will release the anime after build divers wraps up

[@scarletrain6757]

The Milkmann wait they cancelled it 😱

[@missmilky6677]

@@scarletrain6757 I mean there haven't been any updates in a long time, so it may as well be

[@androyus]

@@scarletrain6757 Maybe they just "Kingdom Heart 3"-ed it.

[@hyperion2109]

androyus lets wait 10 years ,like I did for KH

[@ari7164]

0:40 Me: *oh no*

[@fn_flashy9101]

Anson Alexander *unzips pants*

[@Bobert2020]

Was disappointed that he didn't really expose himself :(

[@louiemachan9667]

@@Bobert2020 Cursed comment right here

[@HoloFlight_118]

@@Bobert2020 r/cursedcomments

[@unicorn2291]

"i dont paint my naild" that it self is a lie

[@FranciscoTChavez]

Seeing Barbatos hold that weapon with a single hand at the end is kind of impressive. I have that same kit and I had to pose it with the club over its head, held up by both hands.

[@Pikminer-5087]

Unicorn review: Go home Mecha, you're drunk.

[@RandomPerson-cm2wg]

Literally.

[@swivelboiiguess6422]

Mecha: I'm already home!

[@buddykiller]

the nail varnish thing is VERY common in the action figure community, but bandai's plastic tends to be "softer" than normal plastic and is more susceptible to solvents. also, the proper method for using super glue (again, a thing from the action figure community) is to place a drop on the ball, snap it back into the joint, move it around, take it out, THEN let it dry. this evenly distributes the glue over the surface so you don't get any lumpy spots. it will absolutely cloud the plastic and will break down over time requiring more glue leading to broken joints and brittle plastic so don't mess with them too much after fixing them.

[@juancarlosmarquez7231]

For the nail varnish thing, anything with enamel and lacquer is potentially damaging to Bandai's plastic. They are a bit more sensitive compared to plastics being used by Tamiya, Airfix, etc. (Even though they all listed it as Polystyrene).

[@hathucquan5350]

Now where is my alto grountype review

[@androyus]

"I tried to show the kit at the best possible light" Oh sure, like the time you cut MG Victory into pieces with hot knife? Like when you burned Super Fumina into bloody mess? Like the time you slap RG Sazabi around like a baboon playing with its prey?

[@MechaGaikotsu]

Now they’re customs 😊

[@corruptpixel8441]

And the time he throwed gundam vidar from a second or third floor

[@Jirujan]

yeah, he make Super Fumina and Hyper Gyanko looks so bad

[@lightningbw4711]

@androyus I wouldn't necessarily call them "mistakes" i would more call them bad choice making as MGK wasn't wrong for cutting, burning, slapping, ect Gunpla it was just not the best way to go about that if you get what i mean. Also the kits he abused weren't exactly super rare or super high end kits, he wasn't burning a PG Phenex he was burning a Super Fumina which is one of the most hated kits out there so i don't think anyone really cared that much as for the Saz and Victory Hexa Dash Ver Ka. those shouldn't have been cut to bits or slapped but like i said their not rare, highly sought after, or highly praised so i think it was fine y'know.

[@Jirujan]

@@lightningbw4711 doesn't matter, he didn't "tried to show the kit at the best possible light". hate it of love it, he should do a proper review

[@MeiMei_404]

That ad is the content I subscribed for XD

[@BlackHei711]

I used paint thinner to help panel line my gunpla. I ended up melting my Banshee...

[@alosyarwww]

BRUHHH I WAS JUST TIGHTENING MY HG BARBATOS' JOINTS WITH VARNISH WHILE WATCHING THIS VIDEO THEN THE LAST ERROR SHOWED UP LMAO

[@gabrielramos2788]

TLDR: "I was to drunk to pull a part, that is number 5"

[@rokushou]

Glad to see HiRM has improved so much. The only HiRM kit I've built is the Astray Red Frame and I had no idea the Barbatos was so bad.

[@brandonmiller9155]

I’m new to the channel, I just got stationed in japan, and I’ve heard all about chuhais and as soon as you said the cup was to blame I knew

[@cherwynflorin3619]

Next vid: times mechgai mentioned "giggidy giggidy"

[@NateTheBrewer]

Surfshark should give you extra money because your ad read was so good that as I skipped through it, I stopped on a dog in a box and the awesome voiceover, and ended up rewinding to watch the whole thing.

[@doctorx0915]

me when I see joseph look in the keyhole and see an ad:*OH MY GOD! HOLY 5H1T*

[@aiden4997]

0:39 "SO ITS TIME TO EXPOSE MYSELF. Oh wait."

[@carminegiustiniani4868]

This video is the demonstration of your maturity and clarity. It's always difficult for everyone to admit his own defaults or wrong choices, but when you are a content creator I think is even more difficult. For this you have all my respect as person, something I already had but now a little bit stronger than before. Have a nice day!

[@exodiusnecross]

boi oh boi I was expecting the RG Astray Red Frame one to be included. In the video, you said something along the line of "the waist joint really likes to fall off" which turned me away from the kit for a while until I revisited and saw a comment saying that you didn't push it in far enough. Awesome little kit and that "flaw" that was in your video were nonexistent.

[@DomDomPop]

Damn, I feel like I got a Gundam STD. Now I gotta let everyone I told the nail polish tip to know that they should check their models lmao

[@sausayam]

just started building gunpla last month, watched your video about the lazy way to tighten the joints using nail varnish. i did that on my three of HG IBO kits, and then this video came out. GETTING PANIC AF, check the tightened joints, and luckily it still good!! GODDAMN!!

[@xxnike0629xx]

"EXPOSED! Top 5 Times Mecha Gaikotsu was WRONG! 😯😯😯" -- Mecha Gaikotsu (KZbin, Mar 23, 2020) 05. transforming the leg of RG RX-0 Unicorn Gundam 04. saying ASW-G-35 Gundam Hajiroboshi was actually ASW-G-08 Gundam Barbatos 03. kits screwed up assembling ▶ RE 100 AMX-103 Hamma-Hamma, front skirt incorrectly assembled ▶ RG XXXG-01W Wing Gundam (EW), shoulder armor incorrectly assembled ▶HG GN-0000DVR/S/HWS Gundam 00 Sky HWS (Trans-Am Infinity Mode), waist incorrectly assembled ▶ RG EVA-Unit 01, ankle armor upside down ▶ MG GN-002 Gundam Dynames, white section on torso ▶ MG AMX-004DMD Qubeley Damned, entire waist section backwards 02. saying HiRM ASW-G-08 Gundam Barbatos is worth 6x the price of the 1/100 No Grade version 01. recommending nail varnish to tighten up joints 1:10 Spooky The Net Gremlin? 🤣

[@msn-04sazabi5]

@xxnike629xx Your biggest mistake? You entering the world of Gunpla 😛😜😝😋

[@msn-04sazabi5]

@Black Chandelier Mirage He claims that he's also a builder, but the things I remember about him are his pics of *BOXES* in Twitter and videos of *BOXES* in KZbin 😸😹

[@zakuinabox3992]

XD the ankle guard I mentioned before on your FB post and EVA RG review was literally in the first minute. I'm dying

[@thebossinator9887]

What is that name of the gunplay at 15:18 that looks like a half-built unicorn

[@MrImpala444]

I'm from the future. you do paint your nails

[@jetstrike28]

can anyone find out what exactly are the chemicals that nail polish/varnish contain that CAN melt plastic? im using clear acrylic nail polish and ive never melted anything, but just to be safe right?

[@hanakoikezawa8322]

Check your varnish carefully if it’s water based it’s fine if it’s solvent based it’s not fine

[@retroa-go-go6888]

Acetone.

[@afina_tm3]

Apparently the latest and greatest video on EVA unit-0, you still got the ankle guard upside down... both of them LMAO

[@_Vegtio_72322]

I'm super glad I watched this. I was genuinely thinking of using nail varnish one day if I ever got loose joints. Now I think I'll just save up for tamiya paint or even top coat at that

[@walshmobile37]

Phew, the nail varnish I got hasn't melted anything

[@danyvinasco7]

as a substitute for varnish/paint, if you live in the US or UK, your nearest comic/hobby store almost certainly sells warhammer stuff. you can pick up a tub of "'ard coat" a type of painted-on topcoat used in the war-gaming community which works really well for tightening joints.

[@Wackableidiots]

I remember using glue as a solution to tighten up the joints, as I realized a few days later, the joint was a bit loose again, so I took it off and realized that I had melted 2/10 of the joint away. Definitely won't be putting joint back into the socket without waiting for it to dry.

[@reannoire4330]

One of the things we must mention about HG Varguil's funnel racks placement got wrong.

[@jrmarcus]

I've had that drink...accidentally. I was in a hotel in Japan and I was thirsty, so I went to the vending machine and thought I was getting grapefruit juice. It was a long time ago, I was a teenager at the time.

[@allenusison3124]

I want to admit, I asked for Marchosias for a long time before, and after, Hajiroboshi was born. Hype increased when Marchosias was confirmed to be Hajiroboshi's original form, which, in fact, was my suspicion from the very beginning.

[@ravindertanwar7892]

From where you buy gundam kits

[@TheAriobagus]

God, Now I wanna know is there anymore time when you review a gunpla drunk. And yeah, I use the Nail Polish top coat to tighten my gunpla joints, and it worked well. I guess i'm lucky.

[@aldopolo7]

Yeah, me too If it works, I see the ingredients of some clear nail varnish and polish and some use acetone (wich melts the plastic) so be careful and read the components of the one you are gonna use

[@the_blue_dragon_bd]

MG duel gundam does have a ab crunch it’s just a little stiff I had to get that out there

[@alfianfahmi5430]

The Tertium's beam sabers can be stored in the Seltsam cannon binder.

[@doorbladder5735]

speaking of the Tertium, you know the open thumbs up hands that come with it? THOSE hands hold the beam sabers.

[@alfianfahmi5430]

@@doorbladder5735 More specifically, the leg beam cannon barrels of the Seltsam, which is what Bandai used for the HG Mk. III's beam cannons.

[@kagame1726]

At 0:18 when you say thank you I hear... Tank You.

[@ralfsstuff]

Honorable mention: RG Astray Red Frame's waist

[@FieraDevilWings]

I believe the story of Urdr-Hunt is being released through the Mobile Suit Gundam IRON-BLOODED ORPHANS G app, which was the game which first featured Gundam Marchosias itself as well - at least, through screenshots of it in-game. I personally think that if they went this far already for Marchosias, Hajiroboshi and the story it comes from will follow in due course... But that's just me.

[@lunoadji]

This popped up on recommended. He still didn't learn to put the ankle armour on the Eva properly. :)

[@luminusprime]

The best thing to tighten plastic joints with is Pledge floor wax with Future brand acrylic varnish. You can also use it as a topcoat if you want a glossier finish on a part.

[@NoahR_]

A bought a huge bottle of that stuff at Walmart for five or six bucks a few years ago. I still have plenty left to this day. It also works well for a gloss topcoat since it self-levels.

[@GenesicShinZyraelKai]

#1 - Is a legit method. You just lacked additional information on what kind of nail polish should be used. This the same with using paint as well... some paint aren't plastic friendly.

[@notsoawesomeone]

Wait why did you say that now I litteraly just applied some on one of my gunpla like an hour ago WHY

[@KazeAkiyama]

May the Gunpla Gods bless you with good luck so that your joints don't melt.

[@felps_4500]

@Slate Garner pray*

[@JTMC93]

Might need to do another of these... Maybe have it be a Annual video? Also Urdr Hunt isn't so much cancelled or anything like that but put into a delayed status not only because of the Virus but also a issue with some of the licensing for the game. And apparently them not being able to settle on how they actually want the game to work... (Apparently some form of Tactical RPG, Action RPG, or something like the Gunpla Warfare game is in the lead right now.)

[@yonaskurnia8644]

Not as bad as when i glued my gunpla with korean glue. Let say that my kimaris trooper can't hold his lance anymore

[@NeoSlashott]

Number 1 is a helpful precaution, some chemicals in different kinds of paint definitely ate or melt specific plastics that cause breakage. Mecha, my final helpful tip to you is Never use a GodHand Nipper on Clear plastics AT ALL! Thin metal-nipper breaks when cutting a sturdy, durable plastic which is why Thicc-nippers is a must. xD

[@axel7351]

what are names of the gunplas at 6:35 ?? pls

[@Bobert2020]

Pg strike gundam and perfect strike gundam

[@axel7351]

@@Bobert2020 oh theyre both perfect grade ?

[@Bobert2020]

@@axel7351 yeah. R.I.P wallet

[@axel7351]

@@Bobert2020 sigh rip

[@oliverkloshophdndrecords50]

By far my favorite gunpla channel. By very far!

[@SolaireFlair]

One trick I've always used for loose joints is putting a tiny piece of tissue paper or toilet paper around the joint before inserting it. It adds mass so the joint holds better, it's safe, and it's totally reversible if you need to remove it for some reason.

[@DevanteWeary]

The number 1 thing to tighten joints: Pledge Future Floor Wax. Don't use any nail polish or whatever. This is a well known joint tightener in the Transformer community.

[@leboiofbois1005]

ive never heard such a more passive death threat than to watch the original series from the beginning

[@hoyeonbae4717]

The fact that you took the time to call yourself out on your short-comings, makes you respect you more! You sir, just gained another subscriber!

[@Hdawg107]

Lol! For a second I thought you screwed up with the numbers and put a 0 instead of a 1, but I just realized its a blocky 1. Good lord I was about to rip on you big time!

[@DragonEXtwo]

Okay, that ad read was pretty neat.

[@Amaverasu]

Will you be reviewing the sd barbatos lupus Rex?

[@tfmsgderek8885]

my favorite mistake is the one I pointed out on the MG Impulse

[@kolooozer]

wait, they canceled the IBO app??

[@Spartan-Primer]

Besides the teaser PV that was released months ago, there has been literally zero news regarding the app since then.

[@weebpapa]

what happened to the mic at 4:44 lol

[@kivulifenrir]

Kinda funny that right at the end, I notice one of the chest vents is missing from your MG RX-78-02, as you're asking for us to point out some mistakes. XD

[@activeterror]

Still no apology for the cherudim saga review

[@gunpla_sk8]

EXPOSE HIM 😂 great vid Mecha 🤘🏻

[@shadoukyatto4758]

Thank you for that because I used the clear nail polish on the shoulder of my high grade barbatos and it just straight up melt it so I have to use Gundam 00 arm as a substitute.

[@PatVX1]

Eyy, I remember back when you said that Barbatos and Hajiborshi were the same thing.

[@daniely8947]

I've taken the joint thickening trick to heart and use one of my gundam markers (black, matte) almost exclusively for it... But you can't use it on everything, either. I've broken one wrist (alex 2.0) and one knee (zeta plus unicorn ver), because it was more than the plastic can sometimes take.... Many, even most, kits though? Get those tight joints to hold poses!

[@KazeAkiyama]

I use nail varnish on my kits to tighten joints and I make sure it's the right type. If you're going to use it use a spare runner or something to test that it doesn't melt it.

[@maverickangelcarlos438]

Also the ranking of wargreymon was silver when you reviewed it, then on the omnimon when you compared them you said it was gold tier. Edit: Not that its bad just saying

[@popburnsy3207]

Blaming vodka? Sounds like my college years

[@jonathangarza1656]

To tighten joints i use my girlfriends nail polish. Drys quick and works great. Also the super glue one works too as well as paint but it has to be a thick paint. Works none the less.

[@Arnau_di]

It's funny because yesterday I watched the video about how to fix lose joints and now KZbin recommends me this. I'm glad because I was going to try it

[@Unknown_NT-D]

Hey Mecha Gaikotsu Is your RG Unicorn gundam hip joints still good??? Mine is broken

[@callofmasterchief]

Guess i have been lucky with the Joint Tightning then. I used clear Nail Polish ever since you posted that vid and worked way better then glue or paint ever did for me. And 0 melted plastics.

[@erict.miyahira6241]

A little screw up you made that i remember is that you put the shield of the gm gm wrong, the square part connected to the arm, not to the shield itself.

[@danglerdan7114]

0:48 That light mode view though

[@cpubanana9757]

As soon as I saw spooky being the net gremlin, I fell in love with the video

[@AdaMazzz08]

Me putting nail varnish on the joints of my MG Exia, RIP Exia... (Nothing melted or broke yet so should be fine lol)

[@z4nzil277]

OMG THIS IS SPONSORED!!!!!!! I'm happy for you! Keep going!

[@gooselord_prime]

acrylic should be fine on straight plastic but anything stronger like enamel or lacquer will eat away the plastic if left on for too long or in large enough quantities. Found this out the hard way on my first master grade a while ago. Not a happy night.

[@Milliardo5]

Just wondering if you've ever built the very first HG Gundam to come out, the RX-78-2 which came out way back in 1990. If not yet, then you might want to check it out as it might be old, but there are surprises there as well for such an ancient kit.

[@oliversaldana7078]

Saturnix episode when you try to combine the weapon to the suit

[@nugget9116]

I love your videos because you help me peek out gundam model kits

[@link-kun5974]

Is it safe to buy from Amiami and Hobbylink Japan now?

[@Roxasofmalice]

......Oh...so I am so screwed, thank god I didnt use the Nail Varnish yet.