Lebert Fitness Equalizer Review - Best Dip Bar Station

[@GamerBody]

The Lebert Fitness Equalizer Dip Bars are the best dip bar station I have ever used. During my workout this morning, I went too far on a knee raise, thought I was going to fall over, but the bars held in place! Check them out here: amzn.to/2IX0WVh

[@GamerBody]

Definitely a great possibility, but I have no desire to do resistance training outdoors (especially if it rains or snows). If you want to do it go for it :)

[@willthewild]

Thanks for the response.. I’ve actually been looking at the Gravity Fitness XL parallettes as a much cheaper option..

[@GamerBody]

@@willthewild Hmmm ok Ill look into them as well and see if they are something I can review as a suitable replacement.

[@traveltrainingnl2417]

Nice review man the equalizers are amazing for learning calisthenics. I have the regular yellow bars for many years now and they are still in great condition. Highly recommended !

[@GamerBody]

Awesome! Do they work well for your height? I went with the XL as I am 5'11" and they work great :)

[@traveltrainingnl2417]

GamerBody Yeah man im 510” and im oke with the regular bars but my taller friend struggled a littlebit with my bars 😂 So i recommend erveryone taller dan 510” to buy the XL version. Cheers mate!

[@shawnfahoum5504]

Man I need this quality when I post my lifts

[@paullee4210]

Hi thanks for your videos and I agree with some of the pros and cons points you made. I just got mine as a Christmas gift and they were around $70. I was surprised at the quality of the bars. They are sturdier than I thought they would be.

[@GamerBody]

Yeah best dip bars in the business imo. Can be pricey but a good find for $70

[@natecohen3179]

What size should I get? I'm 5"5 and I want to be able to do full range of motion dips

[@GamerBody]

Hmm you could use just the standard ones at 5'5". Just need to bend knees like any normal dip. Also those will work better for you if you do inverted rows or tricep extensions.

[@shezadihosny2141]

Hi my dad is 5”8 XL? Be good for him?

[@GamerBody]

Yup, I personally recommend the XL for just about anyone. They do have a sizing chart, but I've used the regular before and it seems small even for someone who falls into the range listed on Amazon. Id go XL

[@shezadihosny2141]

GamerBody thanks for replaying back 🌹

[@ΜαθήματαΜαθηματικών]

What material is the pipe made of, and what is its diameter? Is it iron or aluminum or duralumin or something?

[@GamerBody]

On Google it says Iron for the paralettes which I think are made of the same thing. Might be a good question to as the Lebert support team.

[@ΜαθήματαΜαθηματικών]

Which company sells this twin? And how much does it cost approximately?

[@GamerBody]

Not sure about a twin. This one costs around $120 USD but it is the signature edition. I think the base one (black) is around $110.

[@NightStars1122]

I am about 5 ft 10, do you think I need to get the XL version or the regular one is fine?

[@GamerBody]

I'd get XL. You are only 1 inch shorter than me.

[@kent7525]

Thanks for the video bro I was considering buying these and I think you made the case thanks for posting

[@MoisesSilva-si2xz]

Hi bro thanks for you video, I’m 170cm do you think that Xl will work for me?

[@GamerBody]

Yeah it will be fine. You could even get the regular size and the reason I'd lean that way is if you decide to do inverted rows, you will be more parallel to the ground for more resistance with just bodyweight.

[@perfectsq4]

Great review, lots of insight. I'm 5'7" and like the black XL look. In your opinion, would that be too tall to work with for my height? Thanks.

[@GamerBody]

I think you will be fine with the XL black. It may even be better for full range of motion dips.

[@mnop2]

@@GamerBody Hey! Thanks for that review! in addition to @Rick Ramsey question, how about inverted rows? will the XL be suitable as well or too high?

[@GamerBody]

Works well for me with the XL for inverted rows. I'm 5'11" so take that into account.

[@battlefox8460]

My wife just order them last night, I'm also 5'11 and i had her see your review, i can't wait to workout with them soon

[@GamerBody]

Awesome! Let me know what you and your wife think of it after testing a few times :)

[@battlefox8460]

@@GamerBody i definitely will

[@battlefox8460]

@@GamerBody Hey there 😃, i finally got my xl chrome equalizer and it is awesome, I'm glad you made this video, also do you have an instagram?

[@GamerBody]

@@battlefox8460 awesome! I am glad you like it so far. Yeah, my Instagram is instagram.com/gamerbody/

[@KevinHernandez-dp9uh]

Is this safe on a marble floor? I don’t want to slip

[@GamerBody]

Depends what you are doing with them. If you are just doing dips in a controlled manner, no problem. If you are swinging on them or doing a strange exercise like that, it may be dangerous on any dip bar station you buy. On my wood floor they don't move at all once I put them in place and do exercises such as dips, bodyweight rows, and tricep extensions. They are very good at staying in place and not wobbling. Just don't be flinging yourself around on them or they could dip over.

[@KevinHernandez-dp9uh]

GamerBody nah just all those exercises that you listed plances, and other static holds

[@GamerBody]

@@KevinHernandez-dp9uh yup you are good to go with all the standard exercises. Mine doesn't move in the slightest with those :)

[@KevinHernandez-dp9uh]

GamerBody thanks bro and thanks for the fast replies as well lol

[@GamerBody]

@@KevinHernandez-dp9uh no problem! Thanks for asking great questions. Enjoy!

[@2chill2]

What's the difference between chest dip and a tricep dip? They look identical.

[@GamerBody]

The more vertical you are in the dip the more triceps are activated. You can almost make it a push-up if you lean over the bars more. You can also feel the change from triceps to chest as you lean forward.

[@derekderosa4829]

Very descriptive, well done, thanks 😊 👍

[@GamerBody]

Thanks!

[@metatronmen2431]

im 6,4" 220 pounds fit, this thing going to hold my weight and stress?

[@nicomarcona5488]

how tall are these parallettes

[@GamerBody]

31 inches

[@rezolive4838]

Love the grind! ❤

[@littyagain7805]

Another question about this one, can u change the length of it, so make the bars come close when need to? I can see that u can move it around, but let’s u do make it come closer, would it have a awkward grip on it though? Or would it be fine? Like for dips

[@GamerBody]

There are 2 bolts that attach the feet to the legs of the dip bars. I think you could change it so it was up one higher, but you'd lose the strength of the bars overall. The XL is built for anyone at 6'1" to use (you could get away with being about 6'3" or. If you are taller than that I'd look for another option. The regulars are too small for me at 5'11". They are both independent pieces so you can set as close or far apart as possible. I hope this helps.

[@davidneraas750]

I had dipbars that were similar to lebert dipbars and my big major con is that they are not tall enough for me im 1m 82cm sorry dont know the inches. My sister has the ultimatebody press dipbars those were perfect for my height.

[@GamerBody]

I used to have those, but I found them clunky and take up a lot of space. They are tall though.

[@insightvideo6136]

Great review. Subscribed!

[@GamerBody]

Thanks! Do you have a dip bar station currently?

[@insightvideo6136]

@@GamerBody ..I just purchased the very set you use in your review, based largely on your recommendation. They’re coming in on Wednesday. Thanks so much for your review! I can’t wait to try them out!

[@GamerBody]

Nice! Let me know what you think after a few tries. They are in my current program for dips and inverted rows.

[@ethericdezigns1528]

What's the weight limit? I'm a big guy. I'm looking into getting the crome bars. Frank Medrano is one of my fitness idols.

[@GamerBody]

It says 400 lbs. I'm far from that so I hope you have some room to work with :)

[@ethericdezigns1528]

@@GamerBody okay, thanks a lot; and yeah I'm in the clear as well! 😊 I will be getting this product soon! Are they staying holding up strong after all this time of use?

[@ganthc]

Looks incredibly stable! What’s your inseam, bc at 5’11, your knees are almost touching the floor at the bottom of the exercise, and this is rated for 6’1?

[@GamerBody]

Yeah, the website and Amazon rate it for someone 6'1" or taller. Yes, if I go full range of motion and don't tuck my knees they will just barely touch the floor. If I just do to 90 degrees I still have some room though. I've actually started tucking my knees up for a little more weight up by my chest and then all problems are gone. However, if you are really tall (like more than 6'3") I could see the height being an issue.

[@ganthc]

GamerBody I’m 6’2, so this might work! Thanks for the answer.

[@HansumRob100]

Got me one... love em.. but I think I need the xl size as cant really fit under width wise...

[@GamerBody]

Nice! It is still the best dip bar I have used by far. I am glad you like it :)

[@conservativepersonnel8458]

I was about to order it right now had my credit card ready and they are out of stock on Amazon!! WOWW

[@GamerBody]

Oh no! I hope it comes back soon. Check their website and see if they have it.

[@conservativepersonnel8458]

@@GamerBody thank you i just bought it off their website.

[@AwesomeAlexAdam]

@@GamerBody Amazon has them today Sep 24 2020

[@GamerBody]

Awesome! Looks like items are starting to show back up.

[@CraigThomahawk]

I'm 5'10 and ordered the XL. Should I return for the smaller one or is the XL still good?

[@GamerBody]

Keep the XL! That's the one I use and you should not get any smaller than the XL :)

[@wes-yt]

Thanks for the review.

[@jessecruz1285]

So u don’t tools to assemble it

[@GamerBody]

You will need a hex wrench to put the legs on appropriately. Once the screws are on you are good to go!

[@jessecruz1285]

GamerBody I think I’ll just buy the ultimate body press dip than

[@GamerBody]

@@jessecruz1285 It is ultimately your decision. I actually used that one in the passed. Here is my review from a while back for the Ultimate Body Press Dip Bar Station: kzbin.info/www/bejne/aIGYc4arms6Mfrs

[@johnf4659]

I'm 6' 5", what is a good size dip bar (home use) for me?

[@GamerBody]

The Lebert Fitness Equalizer XL will work for anyone taller than 6'1" according to their page. You will need to raise your knees up a little bit but you can do it. Another one is the Ultimate Body Press Dip Bar Station. Here is a review I made on that one so you can compare: kzbin.info/www/bejne/aIGYc4arms6Mfrs

[@sg1ds919]

@@GamerBody Im 5"3 and going with the XL.

[@GamerBody]

Solid choice!

[@Poeticbladezero]

Great vid Derek? Sorry if I spelled that wrong, I skimmed over your channel real quick and definitely glad I found yours as I noticed you've also reviewed multiple pull up bars as well as other equipment. Most youtubers would normally just review one and move on. Anyways great vid and got yourself a new subscriber. Have a good one Also thoughts on the megabar as of now? I'll be needing to replace my old regular pull up bar.....

[@GamerBody]

Thanks for watching! I have thad the Mega Bar in quite some time now. I personally would not get it unless they have made updates (which is certainly possible). I may go and review it again to see if anything has changed in the design.

[@Poeticbladezero]

@@GamerBody Thanks for the response! I just watched your vid and I agree I'll wait as well, I'll watch your other vids of the other pull up bars you've reviewed but so far right now what's your go to? I pretty much have a basic Walmart bought pull up bar which is definitely showing some wear and tear especially noticing the bar slightly bent 🤦

[@GamerBody]

@@Poeticbladezero Here is a review on the one I am using today and it is my all-time favorite doorway pull-up bar kzbin.info/www/bejne/a2Wyc36oZt1qiJo

[@Poeticbladezero]

@@GamerBody Thanks again, last question, if I'm performing a chest exercise with the dip bars, should I turn them in a v shape like stationary dip? I've been just using them in a straight normal way but I've been watching other vids where they've mentioned it may be easier to turn them in a v shape closer to how the body is... again thank you and sorry for the noob questions :/

[@GamerBody]

I think that is a minimal change if anything. Maybe they are trying to hit more of the chest? I personally just use normal straight dips as I find them to work for my tricep development quite well

[@deepdarkmidnight]

That equipment is twice as expensive as in the US compared to Europe. I bought it in Decathlon for 50 euros.

[@GamerBody]

Hmm interesting not sure why that would be the case but good to know. Not sure what the current exchange rate is either.

[@TD-tq2ob]

Yeah I got the same ones, I really don't understand the price point of these ones

[@Edensoul_]

Those are not the same brand though

[@BenAtBrady]

The workout tips start at 2:28 The cons start at 4:34

[@BorkBrand]

You earned a subscription

[@conservativepersonnel8458]

Thanks for the review

[@StefanStra]

So I'm 5"9 (174 cm) would you recommend still the XL ones? @GamerBody

[@GamerBody]

Personally yes I would. These will be great even at that height.

[@jrrambo2097]

Those xero prio's shoes? I see

[@GamerBody]

Yeah, I don't have the shoes anymore but I did enjoy them while they lasted!

[@ant7936]

Good, useful, thanks.

[@wisanuphaisuwan25]

Thanks

[@dishhatter]

Thank you!

[@GamerBody]

No problem :)

[@GamerBody]

Do it :) get to work and spread your results so we can change people's lives through example!

[@boursitocard]

130$ ? What did it double since then ? ;)

[@GamerBody]

I think the regular version is around $120? That's the price I got it for and with more than 2 years of use, I highly recommend the Lebert bars.

[@boursitocard]

@@GamerBody thx ! luckily did find a xl lebert for 50 euros, cant wait to get it :)

[@tremerefury]

I got them at goodwill for $7.50. 😂

[@GamerBody]

Nice!

[@priyanshubadoni8874]

Pirce

[@GamerBody]

Do you mean price? Right now it's about $110-$120 on Amazon

[@willthewild]

Wayyy too expensive

[@GamerBody]

I hear you on that. If you feel it is too expensive, stay away and look for other options. I am going to test some cheaper dip bars to compare. However, these dip bars are excellent and well worth the price since I purchased them. If you can't afford them don't buy as I'd rather you save the money and invest in something that allows you to continue living well :)

[@junkyard-p1s]

Pro source $75- $79.00. EBay. Bought some old school vinyl weight plates used on eBay too.