Silverstone's Cases Are Wild: Alta D1, CW04, Fara 514X, & $60 515X

[@GamersNexus]

Watch our Thermalright coverage! They have too many coolers to keep track of! kzbin.info/www/bejne/Y3KtfWZ9YrSSfMk And our coverage of the Montech cases! kzbin.info/www/bejne/pGSZiqNpZ9V7g6c

[@ACE112ACE112]

1:18 how heavy was the motherboard tray pull out thing?

[@ACE112ACE112]

Are thise magnetic plastic shields solid? Wouldn't that hurt airflow a lot

[@TechOverwrite]

Awesome Computex coverage so far. I'm looking forward to the ASUS one most though... 😅

[@garashdash]

Steve's passive aggression is on another level. If EK and ASUS were people and not multimillion-dollar companies, I would almost feel bad for them.

[@peterandon3052]

Shout out to whoever's doing the sound mixing on this series! Steve's been perfectly audible in these loud environments.

[@Tarvoskemwer]

likely just an denoise algorithm on the mic, they've gotten really good

[@blakecasimir]

I don't need an Alta D1. I don't need that much modularity and space. I don't have the space for it. But I want it very very much. I hope Silverstone are successful because their quality and attention to detail deserve wider recognition. (Happy Fara R1 owner here... with additional fans of course!)

[@Ntense___]

Im eyeing that one to

[@ealtar]

.... if i can put the dvd drives horizontal .. that case is comming home

[@HansenPL]

Impressive modularity. Alta D1 could be my next case. I have Seta Q1. Quality and attention to details is top notch. Maybe except stock fans - Swapped them witch Noctuas. Much quieter now.

[@AA-kt6rh]

"I don't need it. I want it very much." this perfectly describes how I feel about all PC cases lol

[@Raindrops4891]

All fun and games until a few rma don't work out lolol

[@sulphurous2656]

Finally, a case with 5.25" drive bay support that does not force you to permanently choose between either the drives or installing a third fan at the front (by virtue of having to hammer out the mounting frame for the fan).

[@TuneDownUtilities]

It doesn't look like you can mount the 3rd fan with the 2x2 5.25" bays in the front considering the suspicious holes above the fan at 2:05. also by size alone you would still lose at least 3 of the bays even if the fan was mounted with a center offset. although one could argue that two 180s are as good as 3x140s and you could still mount 1x2 bays in the rear instead of the second psu. also fractal define 7 xl can mount 2x 5.25" bays with 3x140mm fans or a 360mm radiator and is probably much cheaper.

[@MikehMike01]

@@TuneDownUtilitiesyou didn’t you understand their comment, they like not having to permanently decide between drives and fans… not that they can have both concurrently

[@TuneDownUtilities]

​@@MikehMike01 ah, that makes sense. the define 7 xl is still relevant in this case. you can choose between the 4th 120mm fan and the 2 5.25" bays

[@Enakaji]

The Fractal Pop Series of cases also offer 5 1/4 drive bays in the PSU basement. That was actually one of the main reasons I went with my current Fractal Pop Air case, since it was a miditower case, it could mount a 280mm AIO Rad as the front intake, has two 5 1/4 drivebay in the bottom and it is long enough for modern GPUs, even with a Rad upfront. I'm currently using an Pop Air Magenta case with an Arctic Liquid Freezer II 280mm AIO with the rad as the front intake and a Sapphire Pulse Radeon RX 7900 XTX as the GPU, fits with quite a bit of room between the GPU and the front mounted Rad.

[@willjohnsonjohnson]

@@Enakaji I got the Pop Air XL for the 5.25" drives. It's nice having them out of the way of the rest of the components, without making the case huge. SIlverstone is onto something with those 4 slots at the top, but my god that thing is huge.

[@eftalanquest]

fun fact, i have a case that's at least 25 years old and only recently realized that it had one of those slide out motherboard trays

[@p_mouse8676]

Yes, it always looks cool, but the practicality is that you rarely use it. I regret getting rid of my old cases btw. A couple of them had much higher build quality compared to the stuff today

[@DickyBenfield]

@@p_mouse8676 it might be rarely, but when it makes a difference, it comes in clutch!

[@dakai4992]

I loved those trays. Put them on the table, mount everything, slide it in. Best build experience ever.

[@killroy42]

​​@@p_mouse8676Uff, I once had a case with 5.25" bays top to bottom AND WHEELS! And I'm sure it was under €100!

[@fruitcake4910]

A SilverStone case?

[@LeMat_njx]

I've been watching coverage of Computex on a few channels, and Steve is the only one I've seen out there straight man-handling the cases. Instead of just reading the manufacturer talking points, Steve's out there giving us the demos. Thanks, Steve!

[@JamieStuff]

I'm glad to see 5.25 still getting some love.

[@canaconn2388]

Fractal Design Pop exists :)

[@Hafk]

Im not getting rid of my dvd drive until it breaks, dammit.

[@rynz_2893]

I used to use those touch screen fan controllers. those were cool. having a cd burner is nice too

[@Connect200]

Same here. It not just for optical drives. Taking out 5 25 is leading to PC being less customizable.

[@canaconn2388]

@@Connect200 Who needs physical media when you can have storage that can fail at any time just by existing? (Yes I know optical media can do the same but they tend to be less prone to that) E: forgot the /s

[@TurntableTV]

Man, I wish Silverstone also built a much price friendlier case that has at least 70% of Alta D1's modularity.

[@AmUnRA256]

absolutely, finally a case without glass and RGB bs

[@michaelcarson8375]

You haven't seen sticker shock. Go look up the ALTA F2.

[@Pyroteq]

They have some rack mount cases that offer the ability to install like 6 5.25" bays. I've got a few of them. One has 2 5x HDD hot swap bays. The other has a BluRay combo drive for ripping and burning as well as a 4x 2.5" hotswap bay as well as a 3x HDD hotswap bay. Excellent for NAS, backing up files, cloning drives, ripping movies, etc.

[@DickyBenfield]

I had one of those slide out mobo trays back in the day. Loved it.

[@GamersNexus]

They're great for access!

[@icatcyningproductions]

true :D

[@brodriguez11000]

Cooler would sometimes be taller than the opening.

[@abavariannormiepleb9470]

Had a rather expensive Lian Li with a slide-out motherboard tray. The mechanical build quality was horrible, rattling and humming from the loose metal parts.

[@meneldal]

Looks nice but too bad the price is looking so high.

[@church493]

Silverstone always was up there among various case technologies innovators. I still remember their very interesting unorthodox layout FT02 / RV02 cases .. I wish they will keep treating us with good products in future to follow as well

[@brodriguez11000]

Still using mine. Wish the power button wasn't in a bad place.

[@Dont_13link85]

Steve's obsession with magnets and how miraculously they work will never cease to make my heart happy.

[@bighammer3464]

The orange turd once said that you drop a magnet in water and that’s the end of the magnet 😂

[@Satori-Automotive]

i just got a new silent case that finally send my extremely old InWin Maelstrom case (which was literally an open test bench) into pension. It has a closed front with 2 "doors" which are held in with magnets. And the front looks like brushed aluminium. So it pretty much looks and feels like a nice fridge. Opening and closing the doors never gets boring. Magnets are awesome.

[@RobFisherUK]

​​@@Satori-AutomotiveThere's a video out there somewhere where the physicist Richard Fenynman explains why there's no answer to the question "how do magnets work". Steve is right.

[@Filip1389_]

Silverstone has some of the best looking cases i've ever seen. Design and the quality of their cases is top notch. Sadly it's so hard to find them anywhere in Serbia to buy them. Not to mention the price which is quite high yet still well worth.

[@Naris17]

I love how Silverstone still likes to experiment with the weird stuff. I still have their SG10 and love the little origami assembly to fit so much in such a tiny area. This modularity kick they're having is great and I hope they shrink it sometime.

[@s0litaire2k]

Silverstone Alta D1's moto : If you have to ask the price you can't afford it! :D

[@wolfpackflt670]

That's a very scammy motto. I can set the price to whatever I want depending who's asking.

[@juuzousuzuya654]

Just a lil joke bro​@@wolfpackflt670

[@rojovision]

Any case with five and a quarter inch bays has my approval. I like a lot of Silverstone's cases, but they do tend to be expensive, unfortunately.

[@DeadCat-42]

My favorite case I call Frankenstein, it's from around 1992, is heavy gauge stainless steel, room for two power supplies, and a built in direct drive squirrel cage blower with an inverter driver and an air duct system that very silently moves a lot of air and puts it wherever you want it. It weighs about 45 pounds. It's big enough that a 4090 looks like it was made for it. and you could put two in the case without worry's about airflow if the MB was big enough. Originally I think it was some some Unix based graphics workstation, I got it University surplus.

[@Tidepods4breakfast]

Sounds awesome

[@brodriguez11000]

Computer cases before ATX could be very unique. MB mounted vertical with a sub-board mounted horizontally at the top.

[@-szega]

@@brodriguez11000 sgi's early 90s workstations were basically a bunch of vertically mounted boards (about 50x50 cm PCB size with an connector running the whole length of the rear side) for CPU, memory, graphics, I/O etc. with one huge axial fan below. "Unique", yep.

[@fayne1]

Can you upload a video of it or post pictures?

[@sulphurous2656]

It's about time we see more cases like these with function over form modularity and serviceability in mind. I just wish that western case manufacturers also didn't skip out on built-in I/O and options like MicroSD/SD card readers or mechanical fan speed controllers even on hundred dollar and up cases.

[@VADemon]

That's what front 5.25" and 3.5" could have been used for. Big add-ins like 5.25" exist but 3.5" is probably only my idea.

[@SvDKILLSWITCH]

Glad to see Silverstone are continuing the CS series, I recently picked up a CS382 for a home server/NAS and have been very pleased so far. Big fan of Silverstone's work!

[@hazonku]

I love all of Silverstone's neat mechanical latches, slides, and hooks. With more gamer centric cases had these awesome features. That last case was really cool. I bet it'd look great wrapped in a wood veneer looking vinyl wrap.

[@Pyreleaf]

Steve: "bolt action screws" Me: *American neuron activation*

[@fajaradi1223]

Does it come with scope and laser pointer?

[@brodriguez11000]

Computer case protected by the second amendment.

[@Pyreleaf]

@@fajaradi1223 hell yeah boiiiii~

[@Serketry88]

@@fajaradi1223 No, but that GPU support bracket is basically a keymod rail

[@BigBear--]

Haha, yeahhh boii!!! Just came back from a gun show with my shiny new Aero Precision M4E1 stripped Lower for a new build...now watching these case overviews so i can spot something I like for my actual PC build. Too many cases this year have been on the small case side. Where are the larger full size cases at (yes I know technically that first Silverstone case was a large case, but that's more of a server type of case, though I do kinda like it).

[@ndoman]

Love the frequent uploads!

[@xabraxasx]

love how old school and rugged the first case looks

[@CheapSushi]

Yesss! Thanks for covering Silverstone! They are nailing it for DIY Homelabbers! I'm constantly checking out everything from Silverstone, even their niche products and I'm like...I don't need it...I don't need it.....oh man I want it....I've already got piles of stuff. I'm so tempting to get the Altra D1. Only did I wish you showed is their new PCIe cards, one is a NAS focused one with 3 x M.2 drives and a NIC in it. They always make something niche but cool.

[@harrythehandyman]

LianLi used to use removable motherboard tray. In fact, I got one from a thrift store and modded it into a NAS server case (combined with standard 2U server 12 bay 3.5 drive cage).

[@TheSjuris]

They are doing that again my Vision case has the feature.

[@chrisfratz]

Cases with optical drive support is amazingly rare today, so I'm happy to see new cases embrace it. I love having a Blu-ray drive in my system for ripping movies primarily, but I also go thrifting sometimes and find some cool older game on CDs and DVDs.

[@occono3543]

You might even be able to get a patch to make it run 4k discs, the makemkv forums have a guide for it.

[@BoraHorzaGobuchul]

I'd've thought there's internet for both of these activities, but whatever rocks your boat

[@chrisfratz]

@@BoraHorzaGobuchul streaming sucks and you can't get 3D movies on most streaming services, I can buy older games on Steam yes, but sometimes you just find a better deal at a thrift store

[@BoraHorzaGobuchul]

@@chrisfratz who said anything about streaming or steam? :)

[@chrisfratz]

@@BoraHorzaGobuchul piracy is great for stuff that I can't easily get access to in terms of 3D stuff. But I'd honestly rather buy the discs and have a physical collection. If you don't like streaming your first instinct shouldn't be piracy. You should buy the discs and let companies know that physical media is better. Vote with your wallet.

[@franka76]

Steve!!! Love the blue!!! And the hustle!!!

[@panzer3279]

Thanks Steve!

[@jakob.k_design]

The Alta D1 looks nice but anything over 400$ for that case is nuts in my opinion. I like the 515x, it looks like it still supports decent length GPUs especially with one of the front fans removed.

[@Legion-495]

If it is rackmountable this is nothing xD

[@blarghmcblarghson1903]

I've always loved how practical the Silverstone cases are, definitely getting one for a home server.

[@BeefIngot]

The Fara 514X looks really nice while having some great mesh breathability. I love how the mesh sort of diffuses the fan light.

[@dangermouse9494]

That slide out motherboard tray brings back some good memories and you nailed it. Bench test, bench test, bench test.

[@emar779]

That Alta D1 is nearly perfect! Only thing left is to have some wheels at the bottom!

[@Panhead49EL]

1:40. You're in luck. Looks like 4 wheels there.

[@emar779]

@@Panhead49EL Ah good catch! OK Silverstone, here's my liver.

[@CheapSushi]

@@emar779 lol same, although I'd want that new Threadripper & board too, which would be another kidney at least

[@jacktherupert]

I'm impressed with the speed that all of these computex videos are coming out at, and even more impressed at the speed your editing team must be working at. Thank you for the amazing coverage.

[@b.b.6995]

Oh no. Now I'm excited for that first case. They had me sold when they showed the disc drives in there.

[@TheCloudhopper]

My homelab server runs in a Silverstone case. It's perfect. It wasn't cheap. But it does certain things that ONLY Silverstone dares doing. I know i pay a premium for the tooling required to make it happen, but only Silverstone offered the case that fit my needs perfectly. And I WANT to pay that. I LOVE Silverstone specialty cases for special use cases.

[@CheapSushi]

yes! I have Rosewill cases, but keep eyeing the Silverstone options because they although have ones that have a traditional rack mount form, still have a DIY whitebox homelabber thought to them with the fan placements and interior, so you can still have a fairly quiet build with lots of airflow that isn't just pure windtunnel via high RPM fans. It keeps in mind the average GPU options out there, which for whatever reason has less and less blower style GPUs now, at least at the lower price point levels and keeps in mind regular CPU coolers, etc. I'm just itching to pull the trigger on one of their 5U even.

[@nicholasgiobbi279]

Thanks to you 3 and the rest of the team for all the work this week. It's been great. Going to order some tools from the store to say thanks!

[@cobalt49]

I really appreciate how many fans are included with their cheaper cases. Honestly, this was the most interesting spread of case designs I've seen this Computex

[@mthlay15]

I'm not even in the market for a case nor any other components. I just enjoy the content. Thanks for the great videos.

[@jonlaw16]

The CW04 reminds me of the NAD M23 amplifiers you might find in a home theater. It would look so amazing alongside some imposing Class A/B monoblocks amplifiers! HTPC cases receive relatively little attention so if you could continue covering them I'd be thrilled!

[@briandoty6279]

I miss those old slide out cases. I still have 2 OG li-lian cases just with this feature. Plus huge fan on HTCP I really wish manufacturers wouldn't start making 5U cases. With an optional rack mount. For the good old home NAS

[@neuplop]

I'm from Spain and want the 515X is just what i was looking for. At that price point nothing comes with fans and goes out of budget or are ugly, i really hope it arrives here.

[@BeefIngot]

The RM52 is something Id like to see reviewed from last time. Silverstone does have a ton of unique rack mount cases for people who want to rack mount their pcs. Availability is kinda rough though especially for the niche models.

[@baronvonsatchel]

Gotta love Silverstone's commitment to making wacky and creative case designs no matter the price. I built my NAS in their CS351 case. In a world of RGB fish tanks, this kind of mechanically clever, function first design is refreshing to see.

[@Kevins202]

Instantly added to my favorite playlist! Definitely my next pc build!!!

[@SealedSun]

Liked the coverage of the workstation/NAS-type cases. It's cool to see what else is out there.

[@canaconn2388]

Shame they're all so expensive

[@jerbjerbjerb5912]

its been 80 years since i have seen steve so happy

[@Javierm0n0]

OMG i remember wanting a TJ07 back in the day! If i need a new chassis with my next build i wanna grab that Alta T1 for sure! EK can suck on an egg though.

[@fayne1]

The Alta D1 is nearly perfect! Love it. I wish more manufactures make cases with slide out trays. I love Retro Cases and their great features that we are lacking today

[@vollkerball1]

12:07 that anger fulled placement of the board... 🤣

[@cIappo896]

This reminds me of old workstation cases I had that needed to have like 4 5.25" slots, and about twice as many 3.5" slots and companies just took their normal cases and slapped one on top of their normal cases.

[@coolcat23]

Now that Alta D1 looks like a great case! Can't wait to learn more about it.

[@K3NnY_G]

I love how case design is now coming back around to basically what my Fractal Arc Midi has always been. The modularity is super cool, actual longevity out of cases like this.

[@OccipitalVision]

I don't know how the booths don't have a person assigned to at least keep an eye on GN because we know he's gonna pull stuff apart to show us practical visual/use case 😂. On another note, ever since you introduced me to SilverStone they are on my radar for future projects and enjoy seeing their products.

[@TechOverwrite]

The CW04 looks neat, I'd love it. A very well thought out case IMO. Great coverage Steve and the GN team 😊

[@2dfx]

Thanks, Steve! Now I'm out money for a new Silverstone Alta!!! Maybe I'm old, but seeing a NEW production case with old-school features like 5 1/4 bay support, removable motherboard trays, etc. really warms my heart and excites me. I have an Enthoo Primo right now but it has several things that make watercooling it a pain. We've had the 1000D and now the 9000D, but they're big without any of the more "older-school" touches. I'm quite literally sold, gonna shove a new Ryzen 9000 build in it AND I can retain my BDRW for ripping those sweet sweet 4K BluRays.

[@mizsilver]

Oh, wow. Both the Alta D1 and CS383 look sick. I had to buy a used Corsair 600T for my current rig, so seeing some new cases that can fit lots of cheap storage is really exciting

[@TihsonToo]

Silverstone has some awesome and overlooked case designs. I have had a couple of their cases and used their Raven RV03 for almost 10 years. The case rotated the board 90 degrees so the GPU and IO mounted to the top of the case and hung the GPU vertically. I still think that is the best configuration, never had thermal issues even with multiple GPUs in the case.

[@UsatiyNyan]

More love for SFF cases please!

[@robertlawrence9000]

Some interesting looking cases! They look very high quality. I love seeing DVD drives in computers in 2024! Still good to have the option in PCs!

[@greg6500]

THANK YOU SILVERSTONE!! Yes some of us do still use optical drives!

[@RiceEatin2010GT]

Love seeing Silverstone stuff! I have a FT02 sitting on my dining room table. Would love to see a successor to that case.

[@ickyendeavors4179]

That Silverstone looks like it is built to be flipped to a 4U. Beautiful. If it has handles for it/rail mounts, perfect. And 5.25" come in VERY handy for some of us still.. so, I appreciate that!

[@mcduvall2000]

Love the magnet comments! Lol. Old school!

[@Thomas.5020]

Love that Silverstone are still producing HTPC cases, one of the only manufacturers left making true horizontal cases. Loved my Grandia GD08B

[@iaink5866]

Always liked Silverstone's cases, still rocking a sugo SG-03 that I've had for about 15 years, perfect houses my VR rig and still looks great

[@edwoodsnowden]

That is one hell of a case, may have to make my next build from that.

[@bobmcbob4399]

Thanks for your excellent coverage, Steve

[@darrtetzy]

That CW04 Classic HTPC is gorgeous - it would fit right into a high end hi-fi setup and no one would bat an eye.

[@jablue4329]

I feel like Silverstone always makes something cool that I wish I could build in/use, even though I don't need it. Every once in a while, they convince me to buy something I don't need but REALLY want. Hope they stay curious and creative because I love it.

[@csabauri351]

The alta D1 is super cool, it reminds me on the iconic Antec Lanboy Air.

[@MikeHoopes]

I purchased a Demcifilter magnetic-framed filter similar to the one seen here for my Fractal Design Nano S around 4 years ago. They have filters for many cases, and mine has worked well.

[@djmidnightwolf]

Steve, my workstation case is a Silverstone Seta D1. This Alta D1 seems like a welcome upgrade to that case

[@ZachAttack2U]

"We're getting blasted by music again... I don't know if it is GSkill, but we can just assume it is" 🤣@9:27

[@Dave30867]

I am still using a Silverstone RV01 Case awesome case had 3 builds in it to date it has lasted very well indeed .😉👍

[@1samm1]

Had my little Silverstone HTPC case in the HiFi rack for ages. Its last configuration was based on AM1, had a BluRay/HD-DVD combo drive, and three 2.5" SSDs 😊 Still fond memories for the excellent service it provided over the years. Given that I am in Asia, the short tower would be an option for the upcoming Ruzen 9xxx build, hm...

[@rangersmith4652]

Silverstone cases are pretty great. I have a pair of white RL06s and a black GD09B (HTPC). The old RL06 is a little tight to build in, but boy does it cool. The Fara line is very RL06-like but seems from this video to be more build friendly. The GD09B is a 4U case with an external DVD bay if you need one.

[@gothic..]

silverstone made my favorite case ever (the ft02s). i wish they'd go back to those aluminum monoliths but it's good to see they're still doing some creative stuff.

[@RodolfoGeriatra]

I love the vibe of these case.

[@xil.sanctified]

I have built thousands of PCs, and Silverstone was head and shoulders above every other case manufacturer I've ever worked with. Phenomenal quality -- so happy to see the TJ07 live in this new rendition -- I wish they kept the case plate clean like what they did for the Muderbox OEM Charles did. Still, solid stuff - Thanks for the coverage.

[@KVAR42]

Liking the Alta D1 and Interested in the T1! Handsome case!

[@MoonJung82]

I bought a white Silverstone RL06 based on Gamers Nexus' review praising the airflow, and those four included fans with a white light, and the Fara 514X is looking pretty good.

[@Kitsune286]

I appreciate that Silverstone is still including HDD activity lights on at least some of their cases.

[@zombl337og]

The first case looks insane for airflow and the modularity makes it super easy to work on it, and its large and unique looking. So many dope cases at Computex this year! This one and the Evolv X2 from Phanteks are my favs (although i wish the X2 was a Full Tower)

[@crisnmaryfam7344]

1:29 Also makes doing diagnoses when something Effs up SO much easier. Very cool. Motherboard acting up (maybe?) then yank it out with the quickness and test another. Pretty sick.

[@Moboproc]

My goodness! Okay, yesterday I was excited over the Corsair 9000D, but this Alta D1 is just insanely good looking and on so many levels. If I was offered both right now it would be a hard choice, but I think the Alta D1 would edge it out. If case manufacturers are reading this, if I may make a suggestion, please, please, please look at engineering stuff with support for 5.25 drives. Really good coverage on this stuff to y'all over at GN.

[@JayceeCordova]

Alta D1 reminds me of 2010 chasis! Nostalgia!

[@stevexc222]

Thanks for covering the CW04. I could see it in the background of other youtubers' videos but they all ignored it. Not that I actually watch other youtubers or anything like that though :O

[@likwidflame]

@gamersnexus I'm running a 13600k and 3060 with full noctua cooling in a Silverstone GD08 from 2006-2007. Perfect HTPC case. Exited for the new run!

[@rhubbard4346]

The video I have been waiting for. I would love to see some silverstone case reviews

[@BeeWhere]

Love Silverstone cases with all the features.

[@hovant6666]

So happy to see Silverstone release some exciting cases

[@dj4aces]

I can't wait to see reviews for some of the cases that have been shown off this week.

[@Marcelis]

GN’s mics are really good with noise cancellation. Can’t even hear the music Steve is talking about. Quality reporting as always

[@andieg8615]

Love Silverstone. Fara H1m is the first branded and reviewed case I got that fit my budget and boi I was pleasantly surprised with it.

[@closm1180]

You need to get a sponsor for this cause I would buy in a heartbeat

[@sergiomf358]

I still have a tj07, back then was a must have for watercooling and moding.

[@Cyber_Phoenix01]

I got to be honest about something. The first case that I personally purchased was a cool master Striker full tower. I still have it, and the main reason why I love that case is because of its carry handle. I would love something that is as wide as that case, but a bit shorter in height. Be honest with you none of these cases today surprises me or gets me excited for a case design. I know it's hard to reinvent the wheel x amount of times but I feel like we're not really moving in the direction to...idk where I'm going with this lolz... I just like a lot of things from the cool master case that I bought a long time ago and would love to see things re-implemented from that case.

[@lareponse42]

Genuinely laughed out loud when I saw the motherboard tray being removed. It's lovely! What a clever idea!

[@hassosigbjoernson5738]

I'm in for those small micro ATX cases in white. Perfect for a midrange PC build, maybe with used parts. Don't need more space anymore on my desk or my couch setup. But my favorite till now is this "XBox Series X style" case. Sleek and stylish.

[@Nachokinz]

Its about time removable motherboard trays returned as an option; always looking for more creative ways to expand my workstation, looking forward to the release. 👍