Garage Door Not Closing? Here's Why!

This is a video dealing specifically with the issue of a door not closing all the way either in the up or down position. It happens and you can adjust the settings with the use of a simple flat head screwdriver.

[@kevinkopec7200]

This video was great. I almost called a repair man or ordered an entire new opener. Thank you so much for this video. Saved me CASH!!!

[@savannahbenedetti4089]

This video was a blessing! My door would leave that 2” gap at the bottom. You are so great for posting this video. I subscribed. Many thanks 🙏

[@julesmejia1592]

I can’t thank you enough. Your video was easy to follow. My garage door is back to its excellent condition. God bless!

[@davidstfleur4451]

Thank you Sam for your video. I thought the foundation of the garage was sinking. You save me from bugs invasion. My garage door is closed all the way

[@kimberlyk1269]

Thank you 🙏 you are so kind to post this and you saved me a house call from my garage door guy that I couldn’t afford this Christmas time and now no varmits can make my garage home!

[@musiclvr1969]

Thank you! Like Jemini_NYC’s problem, I replaced my springs, and did everything by the book. My garage door opened flawlessly, then would only go down a foot and a half. I added, from your video, a little more force downwards, and it fixed the problem. Thanks again.

[@yw1391]

very useful information and the time is very effectively used on the video !

[@faywr9185]

This info was very helpful for me. I clean the sensors and the garage door is back working. Thank you very much. Much blessings

[@burtonsingh]

Your upload information and explanation was very useful. Thanks for sharing your knowledge.

[@Jemininyc]

Thank you very much! I needed to replace the springs and thought I spun it too much. I adjusted the spring and still nothing. But the fix was this. Thank you!!

[@musiclvr1969]

Thank you Jemini, for posting. You saved me the trouble of messing with my new springs. I googled my problem, and couldn’t come up with anything similar, till I saw your reply. I appreciate it.

[@platinumbelle9270]

Thanks soooo much for this video. Very informative!!!!!

[@deplorableb.r.4211]

Just what I needed. Thaanks!

[@onlines11111]

Thanks Man. your tip saved my day !

[@Ryan-pu4iw]

Great video, thank you! This fixed my issue.

[@randjooe6262]

Great video Sam. Thanks! Saved me $$$👍😛

[@richiemfresh]

thank much for sharing this video well done step by step exactly what was wrong with mine your video helped me thanks bro

[@Gtill75]

Thanks. Worked like a charm.

[@omaraguilar3358]

Thanks it helps me great video

[@VinsonDoan]

Thank you for posting this

[@popsmccartney435]

Great info, thanks

[@AgustinaQuinteroFelix]

Hi there. Thank you so much for sharing. Looks so easy. I had an issue my door garage dosent want to drop to close. So many times it happens. But since i rent here and the owners don't like to fix anything here. I notist the door when it gets to drop it stays open just like this video. What i hate is when is snows and gets ice gets the freezing inside and the snow comes inside the garage. I could fix it on my own but don't want to mess with something is not mine.

[@PGhai]

Thanks for making this video. I have same issue

[@leonorcc2094]

Kept adjusting but didn't work. I checked sensors they're Ok I've run out of time. I'll continue trying adjustments tomorrow. Thank you I appreciate very much your explanations and particularly your comment about how it's supposed to 'roll' to a close and not slam.Thanks much!

[@aprilpaseler9344]

Thank you it worked perfectly

[@pnky2006]

Thanks mine just started this yesterday

[@dacon1508]

OMG yes. My garage door was going too far down causing bar to bend and garage door keeps going back up. Adjusting the close notch a little and boom it works again! Thank you!

[@MoreThanMaintenance]

Glad it helped 🙂

[@jerueljmartinezalicea6949]

Excelete video, lo repare!!

[@zacksgaragedoorserviceandr1208]

Great video if you want to now on Amazon you can buy two new white light lens for your garage door motor because you probably have the lift master 1260 or the LiftMaster 1265

[@apdeorian]

Thanks dude!!

[@rickybailey4085]

Very helpful. I do have a question. When my door stops it is below the garage opening at the top but I also worry about the screw you pointed out. Would this be the same remedy you suggest?

[@JJDoesLife]

Thank you so much.

[@jlassiter9247]

I've been wondering why my garage door just kicks back up after closing... now I know. umm... where did I put that flathead screwdriver? THANK YOU!!!!😃

[@Andre-Vids]

The keypad & the remote controls can open the garage door, but not closing it. Why?

[@sipandsniff1744]

THANK YOU 🙏😎🙏😎🙏😎🙏

[@MIGGYME1]

I dont see the up and down on my garage door,do all of them have them?

[@usmanhamid7908]

Thanks, fixed mine after seeing this

[@trevonwilson1]

What if my lift master doesn't have this adjustment option?

[@lowkey2830]

You help me thanks

[@opordinaryperson6595]

Thank you

[@48dupont]

Why did I just fix my door at 2 in the morning thanks it has been driving me craY

[@bobbyminhas244]

Hi pls help me , as i tried to open garrage door , it open little bit than close than come back to open just little bit , thats it

[@andrewm8063]

Your spring is broken. Call a company to fix it.

[@YamaReal]

I adjusted but doesn’t make any difference. It’s hitting stopper when going down then stops. Pls help anyone! 😣

[@polifacetica6399]

Open and closet manually without electricity?

[@traviscobb8287]

What if it acts like there’s something in the way and it goes back up

[@RCrider185]

It’s adjusted to close too much 1 full turn is 2” or the sensors (2 box’s 1’ up from floor on both sides of door are dirty lens /unplugged wires or not aimed at each other

[@Sergeant5e]

I have already maxed out my adjuatment and still wont close.

[@ricovelez2509]

Pulley will not open door it moves 2 feet then close

[@ricovelez2509]

Door won’t open all the way

[@Redhill407]

Uh, how can a door close too much?

[@dontworrybehappy8080]

It happens. Mine is doing that exact thing. The trolley slides almost all the way to the max distance causing the door to bow before it (the trolley) will back off. All the adjusting screws are backed all the way out. Can't find a video for that. Maybe the spring is the problem. Not sure.

[@whiskeyricard]

Dude, you don’t have to show us opening and closing, we’re here because we’ve already seen it in our homes.

[@StarGalz_6689]

Mine is set 2 inches

[@stephenadams7190]

ong

[@stephenadams7190]

omg