Garage humming noise? I’ll fix that!

[@aussiealf1355]

Thanks for the video Brad. Saved me a service call and a capacitor replacement. That's provided the service guy identified that as being the problem and didn't try to rip me off saying i needed a new one.

[@problemfixd1414]

Glad it helped! Remember to like and subscribe and tell your friends. Also feel free to shoot a $ Thanks 👊

[@Viperdriver-d7h]

That was exactly the problem and fix for my door. $20 bucks for a capacitor vs $200 for a new opener. Nicely done!

[@problemfixd1414]

Glad it helped! Thanks for watching. Remember to like and subscribe and tell your friends!

[@monty8008]

You sir are a genius. Mine would hesitate when it’s below 40 degrees. I found the capacitor partially damaged and had buildup on the terminals. I replaced it from amazon and now it opens with so much force it feels it’s going to rip the door off. Liked and sub’d and thank you!!!

[@problemfixd1414]

Lol! Thanks man! Love the comment. Thanks for the sub.

[@annamaybeniash6425]

Thank you so very much, 😊 you described the noise that I was hearing from the motor exactly, and you demonstrated how to fix it perfectly. I am a 75-year-old woman and can't wait to tell my mechanic brother that I fixed the garage door opener😅

[@problemfixd1414]

Glad it helped! Remember to like and subscribe and tell your friends 👊

[@RedfernDE]

You DID save me lots of money Brad! thank you so much! I could not find another video with the same issue until I came across yours.

[@problemfixd1414]

Happy it helped! Remember to like and subscribe and tell your friends! 👊

[@joshsmith3106]

Nailed it. Thank you. Saved me hundreds!!!

[@problemfixd1414]

Glad it helped! Remember to like and subscribe and tell your friends 👊

[@suzyrichardson1275]

Thank you so much! This worked and I avoided a service call fee and potentially an overpriced repair and finding other things that “should be replaced”.

[@problemfixd1414]

Glad I could be of service! Please like and subscribe and tell your friends! Also, feel free to send a super thanks 👊

[@terrywhitehill8107]

Had the same exact problem with my 30 year old garage door opener (humming noise when pressing the opener). I ordered a new capacitor for $13 and replaced it in 5 minutes and BOOM all good!!! Thanks for saving me a ton of money - we’ll see how much longer this old garage door opener works before having to replace it, but I’ll take a $13 fix over replacing the opener and paying for a service call any day!!!

[@problemfixd1414]

Absolutely! Nice job on looking into it and fixing it yourself. Happy I could help! Remember to like and subscribe and tell your friends!

[@MohammadAli-om1gd]

Thank you sir for very clear and concise instructions. I had the exact same problem and your step by step instructions helped resolve the issue in 10 minutes and saved me from a big expensive service call.

[@problemfixd1414]

Happy to help! Thanks for watching the video, and please share with family and friends and remember to like and subscribe!

[@stuartrobinson1593]

Brad! Hero! I did this, and it fixed my garage door! Thanks, man!

[@problemfixd1414]

My pleasure! Happy to help! Remember to like and subscribe and tell your friends. Feel free to shoot a super thanks 👊

[@emmaleerichardson9743]

Thanks so much. Easy fix. $15 on Amazon took 5 minutes to replace! 👌🏻

[@problemfixd1414]

@emmaleerichardson9743 Happy I could help! Remember to like and subscribe and tell your friends! Feel free to sent a Super Thanks 👊

[@clarencecollins5894]

Thanks....the replacement capacitor fixed the problem. Saved me hundred of $$$.

[@problemfixd1414]

Happy I could make it an easy fix and it helped! Remember to like and subscribe and tell your friends. Also feel free to shoot a Super Thanks 👊

[@spinneyspinford8992]

You are awesome! Followed your instructions, and the next afternoon when I got the capacitor from Amazon, BOOM it worked. Thanks a ton and my wallet thanks you also!

[@problemfixd1414]

Happy to help! Remember to like, subscribe and tell your friends!

[@markstauder7338]

@@problemfixd1414 My garage door opener is humming. I replaced the capacitor, it still hums. What sHould I do?

[@problemfixd1414]

@@markstauder7338 many people have had this issue and I hope it’s as easy as switching your wires around. Try that and let me know. Good luck! Remember to like and subscribe and tell your friends!

[@christopherdenk6068]

Great video, I had the same issue and replacing the capacitor saved me a lot of money. Thanks.

[@problemfixd1414]

My pleasure Christopher! Thanks for watching, please like and subscribe and tell you family and friends!

[@Peppers-17]

Thank you! They wanted me to replace my entire unit! I appreciate you!

[@problemfixd1414]

Glad I could help! Remember to like and subscribe and tell your friends! 👊 Feel free to send a Super Thanks, always appreciated!

[@gregduhon5510]

Awesomeness !!!! Exactly the problem I am experiencing! Thanks!

[@BillHofer-o8g]

This was a very helpful and well-done video. It cost me $15 instead of over $200 for a new garage door opener. It was an easy fix after watching your informative video.

[@problemfixd1414]

Bill, so glad I could help. Always nice to save some extra cash these days! And remember to like and subscribe and tell your friends

[@davidschlarp1606]

I wasted $15 trying this. Cycled 1 time and now it's dead again

[@LiSa-wn6hn]

thank you so much, for excellent video, right to the point...

[@problemfixd1414]

Glad you liked it! Happy I could help! Remember to like and subscribe and tell your friends!

[@AlexSanchez-ff8nm]

your fix looks promising, and I plan to try it on my garage motor this week!

[@problemfixd1414]

Good luck! Hope it’s your problem and it becomes an easy fix. Thanks for watching and remember to like and subscribe and tell your friends. Also feel free to send those Super Thanks!

[@AlexSanchez-ff8nm]

Tried it out and it short circuited.

[@CKing724]

Thanks for saving me tons of money on my car insura.... I mean my repair bill.

[@canthonica2]

Man! Thanks for this video. Super easy fix.

[@problemfixd1414]

Anytime! Glad it worked for you! Remember to like and subscribe and tell your friends! Thanks for watching!

[@sirstcast8717]

Thank you, got my garage door fixed in no time

[@problemfixd1414]

Perfect glad to here! Remember to like and subscribe and tell your friends! Have a great day!

[@TheBlaq6661]

Thank you for this video 😊😊😊gonna try fix my garage door this weekend.

[@problemfixd1414]

You can do it! Remember to unplug the power cord 👍

[@TheBlaq6661]

Yes I did thank u. My capacitor is in a case. And it look new. Did u took urs out the the case?

[@farmerbob339]

I'm hoping that's my problem. And did you realize that you could have gotten Zapped by that undischarged capacitor?! People be careful when your messing with a Cap that large . . . Yup. That was it. Not even Genie TS mentioned that. But the Motorhead did work intermittently.

[@danamaz.9705]

Brad, you are AWESOME! I followed your video and it worked for me. I have Genie intellicode. The capacitor arrived next day from Amazon, and boom boom boom💥, my humming garage door lifter is back in business!!!! (I was sure it was toast, boy was I wrong...thanks again)

[@problemfixd1414]

Glad I could help man! Remember to like and subscribe!!!

[@AimeeStClaire63]

Awesome! Very informative. 👍🏾 I have a genie too, and like you, I bet that’s the problem. Makes that exact noise. Thank you so much!

[@problemfixd1414]

Thanks Aimee! Hope it works for you. Good luck! Remember to like and subscribe and tell your friends.

[@cinupinu]

Liked, and subscribed. My capacitor is on the way. Finger crossed this will fix the issue. Thanks!

[@problemfixd1414]

Thanks for the sub! Crossing my fingers for you as well let me know how it pans out. PS like your channel

[@bw9418]

Thank you so much! I hope it works for me!!!

[@jfayiii]

Thanks, same exact model/cap, same issue.

[@problemfixd1414]

Glad it helped thanks for the sub!

[@alm.1764]

Thanks for sharing your video, really helpful.

[@charlieortega467]

Thanks !!! Fixed mine as well.

[@tgbenton0618]

Did you have to discharge the capacitor since they can hold a charge?

[@TheRealBC250]

I had the same problem with my capacitor. It had blown and was smoking during operation. I replaced it with one that was "too big" for the housing but the door worked fine the first few passes. But NOW it only moves about a foot before it stops. It seems like the whole thing shuts off on some kind of failsafe because I cant operate it again until ITS ready. Kinda at the end of my rope here...I checked every other "problem area" and since I didnt mess with anything else Im not sure what the issue is. Any ideas?

[@wgibsonsr1]

Thanks!!!

[@problemfixd1414]

You bet! Don’t forget to like and subscribe and tell your friends! 👊

[@jimmcalinn2017]

I had smoke coming out of mine but still worked but I'm replacing anyway.

[@seligleyser1485]

My 1/2 HP Genie made the same noise. Looking at capacitor I don't seen anything obviously wrong. When I disconnect the screw drive, the motor DOES run. The collar between the motor and screw drive looks fine but replaced that anyway. Same hum when connected. Can a bad capacitor cause motor to not work under load? If not capacitor I'm wondering if there iis binding of the screw drive (dirt in grease or other)

[@virgiliovillanueva9986]

Hi... I have a Genie Pro garage door opener and one of the sensors is green and the other one is red. I have the wiring and they are OK. The other problem that I have is that the opener is humming. Please advise. Thank you.

[@PongoXBongo]

If you're talking about the obstruction sensors down by either side of the door, then those colors indicate that the sensing beam is not aimed properly from one sensor to the other. The one that is green is likely the transmiting sensor, and it being lit green indicates that it is receiving power. The one that is red is likely the receiving sensor, and it being lit red indicates that it is not receiving the beam from the transmitter sensor. There should be a wing nut, or similar, just behind the bracket from the receiving (red lit) sensor, just loosen that and move the sensor around to re-aim it until its light turns green, then re-tighten to keep it there. . I had a similar issue, which prevent my garage door from fully closing properly (it would start, stop, and flash) since the opener thought the path was obstructed as it couldn't see the beam clearly enough (mine was slightly flickering green instead of fully red). Re-aligning the two sensors cleard the phantom obstruction and now the door works as expected again.

[@mojtulifon4858]

Hi. I need help. I have the same motor and I dont now how to connect receiver board. The receiver board is on the right side near the capacitor. It have 3 Wires (one Green, one Violet and Black) the same as U. Where are these 3 Wires connected? Can U help me please.

[@mawhub]

Always discharge your capacitor.

[@jeremythompson0306]

Thanks

[@problemfixd1414]

Happy to help! Remember to like and subscribe and tell your friends!

[@duneme]

Have a Rental that it looks like has the same issue! Capacitor is due Monday! I hope that is the issue!

[@problemfixd1414]

Let me know! Make sure the wires are connected correctly!

[@duneme]

@@problemfixd1414 wires are connected correctly and it still does it! I did it real slow, one wire at a time!

[@duneme]

Wasn’t the Capacitor! Replaced the whole unit!

[@lauriezayed8749]

We had the same problem.. same noise and ordered the part.. unfortunately, it did not fix the problem.. so I’m totally lost now

[@williampliss9879]

Nice garage, but why in gods name didn’t the original installer take the track all the way up to the ceiling and maximize that ceiling height?!?! I would kill to have a 10 foot ceiling. Especially handy when putting the car up on a hoist

[@what9621]

Only thing missing from thus video is the humming sound b4 the fixing.

[@CROIXsather]

Thanks. Had the same noise, but only on the open - intermittently. Not sure if I need a capacitor yet, but I did make some adjustments, and took a photo of the capacitor in case the problem persists. Either way, saved me from buying a new motor.

[@problemfixd1414]

Awesome! Glad I could offer some help! Remember to like and subscribe and tell your friends! 👊

[@bruceroberts3210]

Our opener was intermittently making a similar hum on trying to open, but the capacitor looked OK. Turns out the door travel just needed adjustment, the fixture on the chain was getting jammed at the end of its travel.

[@mdscms]

THANK YOU!!!!

[@tandersen9282]

Now, try fix that 50Hz hum in the background. Thanks ;)

[@mark33328]

I can’t find the exact same capacitor online. How close does it have to match to work?

[@jimmcalinn2017]

Amazon has it for x-19988-A and 19988A same

[@jordanhansen8631]

Thank you so much, where can I send you a few bucks?

[@problemfixd1414]

Lol thanks Jordan but not necessary! Just like and subscribe and spread the love!

[@jtjt4827]

Ok I got capacitor in today. Popped it in. Same noise occurs. Ideas?

[@problemfixd1414]

Check your wiring, make sure you have it back in the same place it was when you took it off. Maybe try that. Could be a quick trouble shoot. Good luck!

[@Liftmaster1246]

It’s your start, capacitor, replace it

[@lambachi]

Thank u

[@dianac2225]

Just changed the capacitor and still humming... not opening or closing 😕 any other suggestion?

[@problemfixd1414]

Did you make sure the wires were in the correct locations as they were before? If not this could cause the door to still have the remaining issues with the humming noise, so make sure your wiring is accurate. If it is, then let me see if I can check in to any other trouble shooting ideas for you. Thanks again and remember to like and subscribe!!!!

[@duneme]

Was that it? The wires crossed?

[@dianac2225]

I'm going to try all over again... so far still not working 😕

[@dmoder3]

Check your manual (or Google your model) and try to reset the open/closed positions. And in addition yours could be stuck on the track.

[@duneme]

Update?

[@jerryschmidt4430]

Could this happen in the open position?

[@jordanhansen8631]

Yes

[@GenieIntellicode]

WhT model number is that

[@detriawalker7262]

I changed that part...it still doesn't work

[@rudypetgrave8100]

Issue exist after Hmmm n change cap. ?..

[@CandaceBelcher]

👏

[@detriawalker7262]

Capacitor changed, didn't work

[@d_stiffler20]

Nice...hope this is my issue bud

[@problemfixd1414]

Same good luck!

[@twmissmt]

Tried safety eyes ... nothing. Tried capacitor ... nothing. Tried circuit board ... nothing. Does that mean the motor itself is shot? What else can I check. The motor looks great, clean and like new so I'm having a hard time believing it is shot.

[@Roborocketry]

Same for me. I replaced the capacitor and coupler (which I found was not worn out) no dice. Still buzzing. Hoping not the motor here to. I think mine may be the screw drive itself binding. So I am going to try and lubricate it and spin it some to see if I can get it going. Were you able to get yours fixed?

[@twmissmt]

Motor shot ... had to buy ENTIRE new garage door opener. :(@@Roborocketry

[@alsoaiden3798]

Bruuuuu

[@MaxibillianBus]

brrrrruuuuuhhhh

[@alsoaiden3798]

Bruuuuuuuuuuuuuuuh

[@freetoride003]

Still noisy dude

[@problemfixd1414]

Promise it will make a huge difference give it a try! Camera audio never does it justice 😝

[@bigjimandthetwins]

Terrible. Should always tell people to unplug electricity PRIOR TO doing ANYTHING. I am a dummy so guess I had to learn the hard way ! your video may have been less costly had you warned BEFORE the video started ! Thanks for the $300 lesson. NOT !

[@Jay-vj1km]

Just curious…What exactly happened in your situation?

[@BrandonMS1]

Don't be mad at the guy cause you're impatient and a dumbass lol idiot

[@quentinlee2134]

@@Jay-vj1km sounds like he did something he didn't understand without the proper research and then blamed it on a stranger who tried to help him

[@Jay-vj1km]

@@quentinlee2134 You’re probably right 🤦‍♂️

[@Roborocketry]

At 2:18 in his video he clearly says, "First thing you're going to want to do before getting in here and going crazy, is always pull the plug." Even shows the plug in the video. Didn't say to discharge the capacitor, but did say to pull the plug and did so before he continued. Did you short something with it still plugged in? With your screwdriver? Regardless, you should always be careful working inside of anything powered by 120-220 volt outlets. Especially if they have capacitors.

[@HWY66]

luv u dude!

[@problemfixd1414]

Thanks! Happy It helped. Feel free to send some love with a super thanks and remember to like and subscribe👊