GE Nautilus dishwasher keeps beeping fixed

My GE Nautilus dishwasher kept beeping all the time and it seemed that there was nothing I could do to fix it.
The first things to try.
1. Making sure the door is closed and latched!!!
This one has gotten us in the past
2. Hitting the start/reset button to reset it.
3. Pushing buttons, trying different cycles etc
4. Remove power to it for 5 or 10 minutes by turning off its circuit breaker or unplugging it
5. Clean out the filters
After all this failed I was thinking I had nothing to lose because if I didn't fix it I was going to have to buy a new one anyway.
I removed power to the dishwasher by dropping the circuit breaker. Then I took all the screws out of the door and found a broken wire. I repaired the broken wire and the dishwasher works now!

[@JuanMorales-ks4ll]

but what was the problem just that wire

[@RyanDale311]

The wire broke off of the spade connector for the limit switch. Since the brains of the dishwasher could no longer receive the signal from that limit switch it got angry and started beeping at me. So once I crimped that wire into a new spade connector and reattached it to the switch it worked just fine after that

[@JuanMorales-ks4ll]

@@RyanDale311 ok thanks for the respond i have the same issue ill see if i can fix it today