GE Universal Remote Quick Start Guide

Use this quick start guide to begin the setup of your GE Universal Remote. Learn how to program the on/off power function, perform an auto code search and program your favorite channels with the keypad. Watch this video to spend less time reading instructions and more time enjoying the benefits of your GE universal remote!
For support and more information on programming your universal remote, visit byjasco.com/support/ge-univer....

[@brianmiles8181]

Thank you very much for taking time to make one of the most helpful videos I have seen in year's

[@JascoProductsCompany]

You're welcome! I'm glad this video was helpful.

[@ArtemisMS]

Thank you!! Just what I needed :)

[@olgasifuentes8667]

thank you!!

[@tommyharutyunyan6072]

Thank u 👍👍👍

[@shaiifrancis7731]

Omg...so much help

[@grantkgb]

Thanks

[@darkigwanagirl7]

thanks so much!

[@wendyguerrero9950]

www jasco products

[@sundaythompson1039]

Awesome! Simple Instructions! Thank You!

[@JascoProductsCompany]

You're welcome! I'm glad the video was helpful.

[@jasonkinney3564]

Wonderful...found code on your website and worked perfectly! Thanks!

[@shakcollymore8022]

Save my life....this video is awesome

[@bow7549]

It worked. Thank you

[@mehtalokesh13]

thank you so much

[@dianasexylatindread4803]

OMG!! ONCE AGAIN YOUR VIDEO IS A LIFE SAVER.. I WAS ABLE TO PROGRAM MY REMOTE AWESOME TIP FOR LOOKING INSIDE MY REMOTE TO FIND THAT LITTLE STICKER TO WORK MY REMOTE👍👍

[@sistalove4807]

Thank you it worked!!

[@DomiHdz369]

Thank very much !!!

[@JascoProductsCompany]

Hi Domi. You're welcome! I'm glad this video was helpful.

[@ericlee267]

What does the four blinks mean when you are trying to put in another code?

[@JascoProductsCompany]

Hi. Thanks for reaching out. I've been unable to replicate the issue you're experiencing. If it is still occurring and you are unable to program the remote, please try resetting the remote to factory settings using the following steps. 1. Press and hold the SETUP button until the red light stays on, then release it. The red light will remain on. 2. Press and release the MUTE button. 3. Press and release 0 (zero). The red light will blink twice. Your remote is now reset and ready to be programmed. If your remote is still not operating properly, please call our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to troubleshoot the issue further.

[@jeffgfan24kav]

I'm trying to program my CL for GE universal remote for a Magnavox TV all the codes don't work. And I also tried code search but that didn't work either

[@JascoProductsCompany]

Hi Kelly! Thanks for reaching out. If you'd like to give us a call, we would love the opportunity to gather more information so we can troubleshoot the issue you. You can reach us at 1-800-654-8483, Monday-Friday, 7AM-8PM, Central Time. Or, if you'd like to give programming another try on your own, here are links to our more recent programming videos, which may be helpful to you. Direct Code Entry - kzbin.info/www/bejne/l4Cyg516jJmUY5I Online Code List - byjasco.com/universal-remote-codes Auto Code Search - kzbin.info/www/bejne/j5yYhqaOop6iq7M Either way, our team is here to help, so please give us a call if you need further assistance or have any questions regarding your remote. Thanks!

[@marykayruddy2907]

Can you run a channel auto scan with this remote?

[@JascoProductsCompany]

Hi. I'm not sure which universal remote you have, but typically, a universal remote's menu button lets you access your TV's settings where the channel auto scan function is found. You'll want to follow your TV manufacturer's instructions regarding how to scan for channels. If you have additional questions, please call our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to assist you.

[@hurricane_laine]

2020! Website and list of codes, third code worded. The two codes in the package with GE TV remote did not work. Thank You!

[@JascoProductsCompany]

Thanks for letting us know. I'm glad you were able to locate the correct code online.

[@timetunneltravel]

For the newer GE Universal Remote, how do you program the App1 and App2 buttons? There is no info in the directions.

[@JascoProductsCompany]

Hi. Great question! The App1 and App2 buttons can open various streaming apps, but those two apps are determined by your smart TV or streaming device. Each smart TV and streaming device prioritizes the various streaming apps, so when you program this remote to operate your smart TV or streaming device, the app hotkeys will open the apps your TV or streaming device prioritize as first and second. The App buttons are not programmable. I hope this information is helpful. Should you have any additional questions, please call our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to assist you.

[@maascarter6159]

What indicator light

[@JascoProductsCompany]

Hi Maas. Depending on your remote, the indicator light could be located on the top edge of the remote, the face of the remote where the buttons are located or the power button on the face of the remote. If you need further assistance, please contact our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time. They'll be happy to assist you.

[@lavvy_91]

Has not worked for my rca tv. Any suggestions? I have tried everything

[@JascoProductsCompany]

Hi. If you've not already done so, please try programming your remote using the Direct Code Entry method shown here: kzbin.info/www/bejne/l4Cyg516jJmUY5I. Also, when programming, make sure there's a direct line of sight between the remote's infrared signal and your device. If you no longer have the code list that came with your remote, you can look up the RCA codes online here: byjasco.com/universal-remote-codes. If the remote is still not connecting or if you would prefer we walk you through the programming process step by step, please give our U.S.-Based Consumer Care a call at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to assist you.

[@joecurtis3766]

I have miss place my code sheet what can I do

[@JascoProductsCompany]

Hi. Thanks for reaching out. You can access the code list online at byjasco.com/urccodes. You're also welcome to give our U.S.-based Consumer Care a call at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to assist you.

[@kacannon2162]

I need the codes

[@JascoProductsCompany]

Hi! You can access the device codes online at byjasco.com/universal-remote-codes. If you have additional questions regarding your remote, please feel free to call us at 1-800-654-8483, M-F, 7AM-8PM, Central Time.

[@lisaevoy489]

What if it says n signal

[@JascoProductsCompany]

Hi Lisa. If your TV is saying "no signal," that means it's not receiving a signal for that particular channel. If you are using an antenna for over-the-air free TV, you'll want to run a channel scan on your TV. Just make sure it's set to scan for over-the-air channels (AIR, ANT, ANTENNA, etc.) rather than cable or satellite. Visit antennaweb.org and enter your address to see which over-the-air channels are available in your area. If you're using cable or satellite instead of an antenna, I recommend you check with your service provider. If you have any additional questions regarding your GE universal remote, please call our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM, Central Time. They'll be happy to assist you.

[@lyndisteinhilber9587]

Menu button will not work regardless of the code I use.

[@JascoProductsCompany]

Hi, Lyndi. Sorry to hear you're having issues with your remote. The auto code search function explained at kzbin.info/www/bejne/j5yYhqaOop6iq7M may solve the problem. If you continue experiencing issues, please contact our U.S.-based consumer care at 1-800-654-8483, M-F, 7 a.m.-8 p.m. Central Time.

[@user-ug1vu5hu3i]

En mi control no me funciono marcar el 1al final

[@JascoProductsCompany]

Nos encantaría tener la oportunidad de trabajar con usted directamente y ayudarlo con su producto. Llámenos a 1-800-654-8483 entre las 7AM y 8PM CT, de Lunes a Viernes.

[@thomasconnelly3962]

I got aphillips tv and Phillips universal remote

[@JascoProductsCompany]

Hi Thomas. If you're looking for programming information specific to Philips universal remotes, you can find those videos on this playlist: kzbin.info/aero/PL-IZQfjytEYIT3nsDtrq0pEgZ1sws0DA4 Also, here is the link to our online list of devices codes should you choose to program your remote using the direct code entry method: byjasco.com/universal-remote-codes If you have additional questions, please call our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time, and we'll be happy to assist your further.