✨ GE WASHER DOESN'T SPIN - FAST Easy FIX ✨

✨ GE WASHER DOESN'T SPIN - FAST Easy FIX ✨
This Video shows step-by-step how to replace the commonly failed lid lock.
When your washer won’t go to high speed spin it means the lid lock has stopped working.
Takes about 30 minutes to repair. Just need a flat head screwdriver and a Phillips head screw driver.
Click Here to order your new lid lock: amzn.to/3bKwgTc
Click Here to order a new lid sensor: amzn.to/3G7dofi
ITS BEST TO REPLACE BOTH THE LID LOCK AND LID SENSOR AT THE SAME TIME👍
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-KZbin Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@scottthefixitgu
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/scottthefixitguy
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.

[@IanMClark-om5qk]

Nearly had ANOTHER divorce since I forgot to go to YOU TUBE. I set the switch to Bulky Items as you said since nothing worked. Hallelujah the washer worked. Email hugs and kisses!

[@ScottTheFixItGuyChannel]

I love it, Great news😊😊😊

[@Jordan-rb28]

I hope this is a joke lol because blaming relationship issues on an appliance is the craziest thing I've heard this month

[@dogandpony4931]

Scott man, your video just saved me from getting overly frustrated. Just got my GE Laundry Center back up and running after a week of waiting on the switch part. Thank you so much!

[@alexdyer9437]

Thank you so much. I was able to fix my GE washer by following your instructions.

[@bassammojaled2921]

Thank you so much ... I used your video to fix my machine...

[@nfrowert]

Thank you, sir! I followed your step by step instructions and it worked. My biggest challenge was getting the front cover off the washer. Great instructions and I thank you kindly for saving me money on a repair man!

[@ScottTheFixItGuyChannel]

Thanks so much👍

[@jrpitcherjr]

We just moved the switch to spin only and hit start to drain the rinse water. We had to raise and lower the lid several times to get it to lock, however. Thanks for the great tutorial.

[@rosadellatorres4375]

Mr. Scott, you are an angel, is been like hell for me with this washer, the maintenance from the building doesn't believe me...well with your video I do have proof from a real technician!! GOD BLESS YOU!!

[@ScottTheFixItGuyChannel]

Thanks so much Rosedella, You really made my day.❤️👍😊

[@victormorgan6820]

Thank you brother. I’m no handyman I assure you, but your clip saved us. Thank you for posting this. It ended up being that the belt came off, but your video provided me with the instructions to remove the cover and from there I could see that the belt came off. This was due to clothing falling in between the wash tub and the top. There is a gap and if you don’t pay attention, the clothing could slip down and interfere with the belt, ultimately knocking it off.

[@ScottTheFixItGuyChannel]

Thanks Victor, I’ve seen that so many times with that model. It’s recommended when you fill it to only go up 3/4 of the total volume of the spin basket. If you get anywhere near the top clothing will often end up in the cabinet and wrapped around the belt.

[@chenglam816]

thanks for the video, exactly my problem

[@ScottTheFixItGuyChannel]

Thank you👍

[@deannecraig8200]

Thank you for this video! I was able to fix mine just as you instructed!

[@ScottTheFixItGuyChannel]

Awesome, Thank you

[@nikolai9098]

where can you purchase a new lid switch for this model? it's hard to tell which ones online are the correct one

[@maryswann7623]

Mucho gracias Sir!

[@ScottTheFixItGuyChannel]

Ce nada😊❤️

[@dereckbalkaran8000]

Nice

[@effthegop]

Mine spins but not with anything in it. Crazy loud noises, not just out of balance noise. Took the towel and pants out, still doesn't work. Took everything else out (a couple Tshirts and boxers) and it is working. The tip on how to remove the front panel is priceless!!

[@eddiedelfierro1068]

What test did you do to determine the lid switch?

[@CPhillips5481]

Thank you so much. My wife has been bugging me to fix the washing machine because the door switch is broken. Now thanks to you, I've done it and she can shut up. Lol thank you so much!

[@blackbird-redx-9754]

CPhillips5481 damn goals

[@stxnpx]

In the meantime, you've been taking your laundry to a friend's house or the laundromat for her, right? lol

[@rodneyjohnston6280]

Thank you you are a smart intelligent young man

[@ScottTheFixItGuyChannel]

Thanks so much😊👍

[@wreckclues]

Hi Scott - Same machine and same shock mount break. Have you done a video on the repair process yet? Also did you do a video on replacing the tub gasket? Recently found a gasket/belt looking thingy in my tub after a cycle, not broken just loose, can you direct me to a parts diagram for this model? Thanks

[@beach-scapes2797]

Hi Im trying to replace the Lid switch.. where did you get the new one? True value doesn't carry it

[@KristyVelesko]

Thanks so much for the video!!! I was able to order the part on amazon same day delivery and fixed washer by 7 :) doing laundry now

[@ScottTheFixItGuyChannel]

Excellent , Thanks Kristy

[@teamavenger007]

Can someone reply with the part number please ??

[@carlosreynosa1219]

Part number ???

[@xXxCoreyGxXx]

Where do you go to get the new switch? Home depot/lowes?

[@BlackVegeta]

Perfect! A damn sock fell in between the bucket and the outter casing and I needed to take down the front panel.

[@ScottTheFixItGuyChannel]

Excellent , thank you

[@alpidiolezama9428]

hello, after watching your videos and trying to solve a problem that my washing machine has, exactly the same as the one you are presenting, I would like to know what would be the fault it has given that the motor of the washing machine rotates in only one direction. If you could help me, I would appreciate it.

[@Zayde8090]

Buenas tardes. Reciba un fraternal saludo desde Porlamar, Isla de Margarita, Venezuela. le felicito por la claridad de sus explicaciones. podría por favor indicarme como sacar las cuatro varillas amortiguadoras de este centro de lavado general electric ? necesito reemplazarlas y desearía por favor me explique en video como desarmar esta torre lavadora secadora. muchas gracias. puede hacerlo en inglés.

[@Giomio2015]

is there a way to bypass the lid lock switch with this model?

[@jamesfletcher2609]

how do you bypass this 4pin switch? connector until repaired?

[@blkirk6471]

I have a spin issue with the exact washer/dryer combo. Unfortunately, while it spins on drain and spin, etc., it won't start spinning during full cycles and the start button needs to be pressed again to get it to move forward to the spin part of the cycle. My tenant is an older woman who has trouble moving around and finds this pretty difficult to deal with. Any advice as to what this might be and how to fix the problem?

[@robertcardelli5221]

Thank you. That was extremely helpful.

[@ScottTheFixItGuyChannel]

You’re welcome😊

[@BeverlyTrice]

Wow... I was able to do this by myself...

[@brandonschmersal2144]

So on the 7th position if my white piece doesn’t spin the motor do I need to replace the lid switch or that part

[@navpreetp2752]

I have same model and seeking your help

[@Wild.horse.]

Hi where did you purchase the lid switch. The lid locks during spin but not wash. Is it still a lid switch problem

[@kryspbacon7680]

Does that exact model not have a buzzer to let you know the dryer is finished? I bought a used set and there isn't a buzzer. Just wondering if my buzzer is dead. I don't know if I have ever seen a dryer without a buzzer even back in the old days.

[@mrtodd3620]

The snubber straps breaking off the tub ring is a symptom that goes hand in hand with a broken lid switch, you have to fix both or the chassis will break the lid lock again. There are a whole lot of reasons that the chassis breaks the lock and tub ring, at the minimum you need to replace all four suspension rods. And if that doesn't work, change the whole chassis.

[@katherinenewton73]

Hello, Scott! Thank you in advance for all of your super helpful DIY videos. I noticed in this video that after the five distinct clicking sounds only the spin light blinks on the machine you are repairing. My GE begins to drain after it's done agitating (washing) then promptly stops draining, makes those same five distinct clicking sounds (as in your video) BUT the difference I'm seeing is my 'SPIN', 'WASH' and 'ON' lights blink. Is a faulty lid-switch still the most likely culprit, even though more of my lights are blinking than just the 'SPIN' light seen in your video? Also I've noticed that the red 'LID LOCKED' light has not come on for me, through any of this. As a landlord barely clearing a profit after taxes, the ability to successfully complete repairs myself is imparitve, so A BIG THANK YOU again for all the help you provide through your channel.

[@ScottTheFixItGuyChannel]

Hi Katherine, I would replace the lid sensor. It’s super cheap and easy to replace . I think the computer thinks the lid is open.

[@tejasamin8862]

Hello Scottthefixitguy, Thanks for putting this out there. My very similar machine does not rinse properly, it seems to fill up then just drains without going through the rinse cycle? The spin cycle does seem to work ok afterwards Any tips would be appreciated Thanks

[@Mikey19962]

Tejas Amin my unit is doing the same thing any luck in fixing yours is so I could use help

[@Mikey19962]

I have the same stackable but my machine don’t not go to the next step when washing clothes you have to manually change it if you have any idea I would love the help thanks for the great video

[@BURAOTngBAYAN]

Got the exact same model. The spin cycle is not working, so I replaced that same part. Hoping it would fix the problem. It did not. If I set it to spin, it would drain and spin. But when I set it to wash cycles, it would not. Need help.

[@LeanOnYourRep]

I think you should we title your video, how to replace the lid switch. The headline you have makes it seem as if there's a trick to repairing it but what you're doing is replacing the part. Thanks I hope this was helpful

[@lasmilyunanoches3559]

Alguien que me pueda explicar en español como usar esta lavadora por favor

[@johnnygallardo76]

my sackable engages but will not spin it is somehow locked i checked lines and there's nothing in them could it be a bad motor?

[@TinthiaClemant]

Please. How do I change the washing machine belt? Help.

[@joycelynjessie]

Where to buy the parts?

[@RubbinRobbin]

Hi, I have a dwv pipe that’s clean at 1-1/2” and the pump overflows the standpipe, I was wondering would it be possible to switch the washer drain hose with a smaller more constricted hose or perhaps decrease the intensity of the pump to prevent overflow? Thanks

[@ScottTheFixItGuyChannel]

There’s a narrowing of the standpipe where it makes a 90 degree turn. You should snake it out to allow water to flow better. You might also want to check the vent tube for that drain on the roof to make sure it’s clear.

[@joe7665]

Bro nice vid! Mine wasn’t spinning and you showed me how to get that front panel off.. a lot of socks fell down and knocked the belt off

[@ScottTheFixItGuyChannel]

Excellent job. I’ve seen that a bunch of times.

[@jessierich7855]

Hi! If my problem is intermittent, (as In I’ve had a problem since yesterday but today after opening and closing I was able to get the lid lock to function) which part of the assembly do you think it is? The lid switch itself or the magnetic read strip? Also even though I got it to spin after the lid locked, my clothes are still soaking wet! Do you have any thoughts? Thank you in advance so much!

[@ScottTheFixItGuyChannel]

I wonder if the drain pump is not working well enough to get rid of all the water? Do you think there’s water left at the end of the cycle after you remove the clothes?

[@texascatman7]

Im dealing with this same unit but my problem is that it starts to spin gets up to speed but then it stops and starts again

[@robertkimmelkimmel8327]

All the lights On the control panel are on and the washer will not run how do I reset it

[@ginaspinello7534]

I replaced my lid switch successfully by washing your video. Thank you so much! The only thing is that one of my suspension belt fell or broke off the tub. How do I fix that??

[@ScottTheFixItGuyChannel]

Can you send the same question to my email at: [e-mail]

[@gschillify]

Thanks for the video. I get this same problem where the lid won’t lock when moving to spin. However, if I put pressure on the lid and press start it will engage the lock. So I think the switch works but it’s not registering the lid is closed. Would this be more of the magnet problem? Or should I still try replacing the whole switch?

[@ScottTheFixItGuyChannel]

Is there a couple of small round rubber bumpers on the lid.

[@gschillify]

@@ScottTheFixItGuyChannel there is. I figured out last night that the latch on the door wasn’t getting far enough into the locking mechanism. I just twisted the door a little and problem solved.

[@FastFreeFixes]

Excellent, Thank you

[@danielrufledt5246]

Sounds like bearings in gearbox noisy?

[@MamaOf3Pinks]

I have the exact same set. Normal setting the agitator spins slow. Not sure if that’s normal. Noticed on rinse it’s drains and it spins fast and fills up. By the time on spin button it doesn’t spin at all while on a solid red lock lid light and just drains the water out. Any ideas?

[@ScottTheFixItGuyChannel]

Hi Tara, Can you remove the front cover to make sure the belt is on.

[@djkaneck1]

Same model, how do you fix a drum leak?

[@TheMechas56]

DJ KaNeck Hi there!!! If drum has a hole it's not worth to repair it,but try to dismantle washer,just the front to expose drum and all hoses,then run a short cycle and watch for any leaks,good luck.🍺🍺

[@shannonlabaw5719]

Excellent! Where do I order a new switch?😊

[@ScottTheFixItGuyChannel]

Here: www.amazon.com/WH12X10334-Switch-Assembly-Washers-PartsBroz/dp/B07YFFMG6D/ref=mp_s_a_1_5?adgrpid=55818462477&gclid=CjwKCAiAr4GgBhBFEiwAgwORrdP9bW8y_V1T-OrWeOw9DRExlC0PQHH_tPRbpl5qMboQ0v-5vz3j6RoC4ssQAvD_BwE&hvadid=583833557518&hvdev=m&hvlocphy=9032028&hvnetw=g&hvqmt=e&hvrand=14563355497421905254&hvtargid=kwd-304076659612&hydadcr=3932_13200312&keywords=lid+switch+for+ge+washer&qid=1677794137&sr=8-5

[@gezt1546]

Hi Scott, Thanks for the video. I have exactly the same model Washer/Dryer. My problem is to the dryer. The dryer does not start. I hear the sound tends to start but not the spinning not start at all. May you have any video or any steps to the dryer side. Thank you.

[@ScottTheFixItGuyChannel]

Sorry I don’t . You just need to replace the belt.

[@rickardocampos4872]

Thats your dryer motor

[@xXxCoreyGxXx]

What is the part number for this exact model lid lock? Thanks in advance.

[@annete968]

I got the part #, it is: General Electric WH44X10288 Washing Machine Lid Lock. you can buy it from amazon or eBay. many people want to know the part #, but do not understand why video publisher does not share the information after so many requires,

[@justinsteen7731]

Hi My Agitator not working or spining, but Lid lock light comes on. Any suggestions ? Thanks

[@ScottTheFixItGuyChannel]

Hi Justin, I think the belt came off

[@robertcardelli5221]

@ Scott. I have a GUD27GSSJOWW stackable GE WASHER DRYER. PRoblem !!! Washer starts to agitate in wash cycle, but stops immediately. One agitation to the left and it stops. Wash light blinks, lid lock light comes on and thats it. ThTs as far as it gets. Any ideas how to approach this problem? BTW, thanks for your your video on “How to replace lid lock switch.”

[@rodrigocontreras1056]

Hey Scott I have the same model Machine and All of a suden is stop spinning, however I can still hear the motor working and doing the normal cycle could you give me any tips on what the issue might be.

[@ScottTheFixItGuyChannel]

I wonder if the belt broke?

[@rodrigocontreras1056]

Scottthefixitguy thanks I will check that I’ll kip you posted

[@texascatman7]

I do apartment maintenance I'm having trouble with this particular model. The machine trys to spin but stops. Sometimes it will eventually spin and sometimes it just quits

[@zee00007]

For my machine it was the motor

[@CreatingExcellence]

texascatman7 have the same issue. What was the solution?

[@danhosker5689]

Anybody still having a problem with the washer not spinning you might want to check the shift actuator at the bottom of the washer tub it is connected to the support Fork on a GE model don't know about other models but sometimes it can short out and cause it not to go into spin or agitation mode

[@ScottTheFixItGuyChannel]

Thanks so much for the info Dan

[@danhosker5689]

Scottthefixitguy no thank you great video just saying that just in case people replace the door latch and it still does not work but either way keep it up great job!

[@jsin3104]

Hey Scott, I have the same combo. Mine will fill up with water, the agitator will turn slightly, then stop. Same happens when set to spin. It drains, then stops before actually spinning, and nothing happens. Any suggestions?

[@CreatingExcellence]

J Sin What did you find out to be the problem?

[@kryspbacon7680]

I have the exact same set. It works fine but when the agitator starts, it will start with 4 little clunking noises, stop, then 4 more little clunking noises. Then will start agitating. Is this normal for this machine?

[@ScottTheFixItGuyChannel]

That is normal👍

[@TVMii]

I have the same combo set and the washer sounds like a airplane at full speed. Any suggestions? Thanks

[@LeoMBoller]

TVMii live with noise as long as you can stand it, then get a tub assembly.

[@redheaddarlin]

I have this exact same washer/dryer, and the dryer turns on and works great, but the washer has no life. It does not power on. What could this be?? Thanks!

[@ScottTheFixItGuyChannel]

+Ariana A. Can you try turning off the breakers for your washer dryer and then turning them fully back on to see if that helps? Some of these machines used to breakers one of them may be not working.

[@yasnac7576]

Ok a new issue has creeped up. I replaced the lid switch and the unit seemed to work. But now when it finishes washing and goes into pump out to spin it just sits and pumps and pumps and pumps and it won't spin. This is part of the first rinse cycle. So I put it in diagnostic mode and selected spin cycle at position 7 on the dial work perfectly! What's up with this is this a control board problem or some kind of sensor is not being tripped? Thanks for your help Hope to hear back soon.

[@ScottTheFixItGuyChannel]

Hey Scott, I would replace the magnetic sensor that’s right next to the lid switch you replaced.

[@yasnac7576]

@@ScottTheFixItGuyChannel no tested it by bridging the wires... It works

[@yasnac7576]

New washer on the way!

[@migui1989able]

I have these machines on my apartment complex. The pulley was broken so I replaced it. I adjusted the tension on the belt because the motor was pushed inwards towards the center of the tub. Once the motor begins to spin it immediately shuts off and the lid lock light stays on solid while spin flashes and won’t work anymore. I reset it and the same thing happens. Any thoughts? Would appreciate the help, GE has come out and no answers yet. Thanks,

[@ScottTheFixItGuyChannel]

+migui1989able I wonder if the belt is now too tight?

[@patelalpesh1984]

Hi Scott, mine is same machine but the lid switch works and still it doesn't drain or spin.

[@josepagan5602]

Same problem here! Help!

[@aaafry]

Yes same problem, did anyone find a solution?

[@lindasnyder313]

I hope you still check this posting cause I have a problem. Today I was going to wash a load of clothes and everything was fine.....filled with water but then wouldn't start. I had NO lights. So fixing it the female way banging things I gave up. Shortly I heard the washer going and everything seemed to be fine. When I went back to put the clothes in the dryer, they were soaking wet. Again no lights.....no on, spin......nothing. Help!!!!

[@TankHandy]

Whats the part number

[@shainball26]

I know one thing, and I hope GE sees this, I will never ever buy another GE product again. I've had my washer for 2 years and have been having the same issues on and off with it's filling and not washing. It always happens when I need things in a hurry, and it is simply infuriating. This is the first brand new washer I've ever purchased and if I had more trouble with than the $20 washers from Goodwill that are 20+ years old. How ridiculous is that?!

[@kimberlydiaz7750]

Mine is three years old. Was always crazy loud and now does not spin long enough to drain the water! Junk! I definitely do not recommend GE now

[@FLUXRAKER]

If I push down lightly on the lid it goes into spin ok if not it DOSENT any help.?

[@ScottTheFixItGuyChannel]

You might remove some of the rubber on the pads that cushion the lid closing.

[@TheRav3n]

I can't get that front panel off.. am I putting these knives in the right place?

[@CPhillips5481]

theintellectualz11 put a light to where you can see in there and you'll see metal clips on both sides. Just dig them out of they're position to unlock them and get the door loose. Using a light helped me position my screwdriver where it needed to be.

[@michaelmarks6371]

I have a question I have a GE stackable washer and dryer when it gets ready to agitate it doesn't agitate like it used to then it will stop an the wash light will blink any solutions

[@ScottTheFixItGuyChannel]

I wonder if the belt came off?

[@michaelmarks6371]

@@ScottTheFixItGuyChannel the belt was loose I tightened it back up

[@ScottTheFixItGuyChannel]

Nice job👍

[@NOName-yj2cs]

Awesome video thank you so much!!! Mine got stuck in the lock position so I got mad and well yeah pulled it up and snapped it so now I've got to spend $52 on Amazon to get a new one, ouch! Anyway, I'm not 100% sure of the model number there's one that looks like it's the one on Amazon model # WH44X10288. I hope that's the one cuz I'm getting that one now... again you ROCK!!! Thanks so much 😆😆

[@ScottTheFixItGuyChannel]

Thanks so much👍

[@jessethompson4777]

I work on these all the time. Another problem that causes it not to spin is the speed sensor. If it starts to spin or agitate and stops then check speed sensor. It can be found on the motor and its relatively cheap.

[@ScottTheFixItGuyChannel]

Yep, pretty common.

[@mariesayegh664]

Where can I purchase one at ?

[@adamc4155]

My lid switch module is very difficult to disconnect from the lid switch! I've been pulling with pliers and tugging on it with no luck, seemed to be stuck with a clip.. any suggestions?

[@ScottTheFixItGuyChannel]

Hi Adam, Is it the lid switch or the lid sensor.

[@adamc4155]

@Scott The Fix-It Guy DIY Appliance Videos after replacing the lid switch the washer is working again 💪 the sensor was okay 👍 the lid lock module was very difficult to release from the connector, I had to literally pry the thing open and spin the connector off the prongs, but success 🙌

[@joannedaniel5647]

What about if all lights is flashing but washer not working at all but the dryer do

[@daniellelisman]

Joanne Kendrick this is happening to me right now. I need help

[@katherinenewton73]

Hi, if you had your GE stackable repaired, do you recall the exact issue you were having?

[@matthewliebau7312]

would it still be the lid switch if the "wash" light is blinking not the "spin" light? it fills fine but wont agitate. when you press the start botten it like clicks then does nothing

[@ScottTheFixItGuyChannel]

It thinks the lid is open

[@thejb0897]

Anyone know the model # of this washer/dryer?

[@ScottTheFixItGuyChannel]

GUD27ESSMWW

[@miamiappliancerepairservic8893]

I have one that gives me an error code of spin and on witch means something clog up but when I check the whose nothing is in there of I check the pump even doe it drains by itself

[@ScottTheFixItGuyChannel]

Maybe the drain hose is too far into the drain in the wall making it drain all the time.

[@JOAJOA]

Can you answer my question? I have the same model in a studio apartment. Sounds like an airplane. Maintenance for apartment replaced the tub, I believe you call it but it went back to the airplane noise. Is this normal?

[@ScottTheFixItGuyChannel]

Do you think it’s being used to wash really heavy items like blankets or bathroom mats?

[@JOAJOA]

@@ScottTheFixItGuyChannel No. Can you please answer my question?

[@ScottTheFixItGuyChannel]

Can you send a video of your washer during the spin cycle to my email at [e-mail]

[@JOAJOA]

@@ScottTheFixItGuyChannel I had a maintenance guy from my area look at it and he says there is no problem.

[@JOAJOA]

@@ScottTheFixItGuyChannel it is not the spin cycle it is when it's at it's full speed.

[@kashifmalick1617]

I have same machine and I have problem, machine not washing.could you please help me how to repair

[@ScottTheFixItGuyChannel]

I think you’ll need a new lid lock.

[@caitlinanderson8479]

Same washer, load was off balance during spin cycle, now the wash and spin lights are flashing and washer won't work. Help!

[@ScottTheFixItGuyChannel]

Great Question Caitlin👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin

[@carmenmaysonet1595]

How do I replace the washer belt ...its not the lid lock in my case..

[@ScottTheFixItGuyChannel]

Can you send this same question to my email so I can help you further: [e-mail]

[@KevinFisher215808]

Tried replacing lid switch, didn't fix my problem. Dug around and found how to read the diagnostics lights. Lights are showing a motor block.......checked for stuck clothes and what not and there aren't any. Reading that it could be the board. Any tips on how to tell if that's definitely the case?

[@ScottTheFixItGuyChannel]

+Kevin Fisher Thanks Kevin, Look for an article of clothing that wrapped around the motor

[@stxnpx]

How do you read the diagnostic lights?

[@mlovvo]

put the unit into diagnostic mode clear the codes and try again. also could be a small tub seal leak has leaked into the supports bearings causing it to seize up. or water damaged rps sensor. but since we like to fix the easiest things first just try to clear the codes and re run a regular cycle

[@aaafry]

I have this washer and tried replacing the lock lid switch. It still won’t drain and the spin light is blinking green and the lid locked light is solid red. Can you please help!

[@corsterthegreat]

Check the lid sensor and make sure the wires are connected properly - it's the white plastic piece just above the lid switch. Most likely culprit and easy fix.

[@shuchivyas]

What is the part number for the lid switch?

[@marisgallegos3917]

Shuchi Vyas, did anyone ever respond to you?

[@LeoMBoller]

You should be able to get the part number off of the part. It will vary from one machine to another. Mine is WH44X10288. Look for WH, 1 or 2 digits, X, then up to 6 more digits.

[@JoseHernandez-vr3kh]

Mi lavadora empieza a lavar y se detiene.

[@googleuser6875]

In my situation, I get the lid lock light; the lid is locked, BUT, when the spin, or wash agitate tries to start, it stops and the associated function led (wash, or spin) flashes. Any help greatly appreciated.

[@ScottTheFixItGuyChannel]

I think the little white magnetic sensor located near the lid lock needs to be replaced. The wire below it got broken from too big of a load. Just need to replace that piece.

[@googleuser6875]

@@ScottTheFixItGuyChannel I tested continuity through that switch and it was as it should be according to the service manual. The motor actually starts to run, then shuts down.

[@ScottTheFixItGuyChannel]

Gotcha, It might be the shift actuator.

[@googleuser6875]

@@ScottTheFixItGuyChannel Would that produce a code Scott? This may rapidly become beyond my tool collection as well as expertise..

[@ScottTheFixItGuyChannel]

I think that does produce a code. I have seen The lid lock function but not allow the washer to go to spin. It might be worth it to replace the lid lock since they are cheap and easy to replace.

[@bobl1636]

If the unit stops before rinse and you find by closing the lid hard and it starts Check the 8 pin connector to ensure all the wires are seated down

[@ScottTheFixItGuyChannel]

I think it’s time to replace the magnetic lid switch

[@bobl1636]

@@ScottTheFixItGuyChannel Thanks for the reply I did replace the reed switch and the the lock solenoid It seemed to work but over time it became intermittent that is when the connector was found

[@fullgrown08]

THE FIX IS SIMPLER. Unkink the hose in the back. It’s not spinning because it can’t drain and it can’t drain because the hose is not how it should be, just wiggle the cord and it will start back working

[@geegreen2595]

on this same model. i have a stackable that when i place clothes in to begin wash. it fills up with water and it will begin to agitate for a split second and than the light begins to blink as if the machine was paused... what could that be?

[@ScottTheFixItGuyChannel]

+Glenesha Green I think the lid switch is faulty

[@fuckyoulametakingmyshitlet2267]

Glenesha Green do you know were the part number is on that part I don't know witch one it is

[@fuckyoulametakingmyshitlet2267]

Scottthefixitguy do you know what the part number is for it there is a bunch and I don't know witch one

[@geegreen2595]

GTUN275EM2WW is the model#

[@geegreen2595]

a guy said it could be the control board or the lid switch. i have placed it in service mode and the codes or saying no issues.

[@navpreetp2752]

Yesterday I heard hard noice from motor bcoz couple of socks were stuck in pully and belt. I opened the front cover and cleaned but I noticed i tiny connector with blue and pink wires is disconnected from some where. Im trying since last night but couldn’t find the place where it supposed to be. R u able to help me please?

[@ScottTheFixItGuyChannel]

Was the wire in the upper left hand corner?

[@navpreetp2752]

@@ScottTheFixItGuyChannel may i send you the picture

[@ScottTheFixItGuyChannel]

That would be great. At: [e-mail]

[@navpreetp2752]

I got your advice. But now the big problem is that im not able to locate the place near motor where the speed sensor supposed to be.

[@cluenxa]

does not make sense. you try to start the washer, but the selection knob is turned in the off position? if spin light flashes i find it is the speed sensor attached to the motor.

[@rascal728]

My GE washing machine spins when it wants and dosent spin when it wants. Also it goes from cycle to cycle in other words if i throw in a load of laundry and go to work when I come home the washer is still washing. Goes from cycle to cycle non stop and I can not find any videos to address this problem. Please help

[@TheMechas56]

RASCAL 728 Hi there !!! Look at the drain pump,it seems like is not draining all the way,disconnect all hoses on drain pump and look for any restrictions, watch for any water spills,Good luck.🍺🍺Sorry,I forgot ; you have to remove front panel.Good luck again.

[@rascal728]

TOOK CARE OF IT ALREADY THANKS

[@theodorepedro]

So what happens when you replace the lid switch the one that you're replacing now and then one in front of that and the magnet above that and it still keeps doing it. The washer is only 2 years old too. I Still can't figure it out.

[@ScottTheFixItGuyChannel]

Were you able to do the reset procedure after you replaced the parts ?

[@theodorepedro]

@@ScottTheFixItGuyChannel i didn't do the reset 🤦🏾‍♂️

[@theodorepedro]

How do I do the reset 🤔

[@theodorepedro]

Thank you in advance

[@CUBANO4536]

i had the same problem and i never got it to work i even replaced the board

[@ScottTheFixItGuyChannel]

+efrain vasquez Is it still not spinning?

[@CUBANO4536]

Scottthefixitguy no

[@aaafry]

Did you find a way to fix this?

[@AceNiteFliteOne]

I replaced lock lid switch. Still no spin. It clicks, but will not spin. It fills, washes, drains, but just won't engage spin. Lock lid light does not come on. But does in service mode.

[@ScottTheFixItGuyChannel]

Usually best to replace the lid lock and the lid sensor located right next to it👍

[@AceNiteFliteOne]

@@ScottTheFixItGuyChannel I have tested lid sensor, works fine. I noticed 1 relay on circuit board has small burn mark that the others don't. Also saw a video where guy replaced motor then spin worked. I don't think it's motor on this one. It works in agitate.

[@ScottTheFixItGuyChannel]

Good point, That burn mark makes me think that it’s probably the circuit board.

[@Tha_ar-Ban_Gad]

So what is wrong if the dryer workers perfectly but the washer won't even come on. Not even the lights

[@ScottTheFixItGuyChannel]

I would try turning off and then on the breakers .

[@billparsons2115]

My stack washer spins forever, what’s wrong with my machine?

[@aaafry]

Did you find a solution?