Superlite Car FAQ - SLC questions answered

Check out the two books I've written over at Amazon.
LT1 Performance book: amzn.to/2Fuip2n
LS Swap book: amzn.to/2BPv0NJ

[@trevon2560]

now I want to build one

[@RockyMountainMotorHead]

I would be very interested in what you had to do to get it road legal. This type of car keeps grabbing my attention, but the process of getting it approved by the DMV is one of my biggest concerns.

[@GearheadDaily]

Thanks for letting me know. I may just do that video, its a good story.

[@Joshua.R]

@@GearheadDaily I am totally interested in that also 👍

[@GearheadDaily]

You got it, I'll post a follow up video to explain this and other questions people are asking.

[@bradcarpenter1881]

What an amazing and inspirational car build!! Absolutely love it!

[@Halfcocked86]

Yes please tell the DMV stories.

[@scubasteve3778]

He did, I think it's on Vinwiki.

[@Halfcocked86]

Here from Vin wiki. This is now my dreamcar . thanks. I'm going to try to own one this year . and finish by 2022. Thanks again.

[@captin2284]

So how's it going?? Are you almost done?

[@TheGilmanja]

Thanks for the video! I would love to build my own in the near future. You said you're 6-1 and can fit. Do you think there's enough room within the interior (with leg room, seat to pedals to shifter) to fit to fit a 6-8 person? I'm sure with enough customization I could make it work just thought I'd ask your opinion.

[@muzikunit7148]

good info man now i can look in to getting one cause i really like the GTM so it was between SLC and Factory Five to see the one that I prefer after I seen them in person

[@GearheadDaily]

ANy time, glad I was able to help :)

[@pluviamachina3583]

I have a couple questions: 1. Will the car allow you to automate the transmission, or otherwise have it possess an automatic transmission? I want to use paddle shifters. 2. If I were to use the Turnkey-Minus program to have them build it for me (up until the engine & transaxle), how much would that cost?

[@markburton9614]

I'd be very interested in your experience with the DMV, I've heard your state and mine (Arizona) are pretty similar in kit car and one off builds for getting licensed.

[@michaelbulzacchelli8887]

How many parts besides the drivetrain components did you have to fabricate or source that are not included in the kit? I'm half way through a Factory five cobra kit and found that I have had to source and make many parts. I'm thinking about building an SLC next.

[@oscareinn]

Thanks for the vid, awesome job, you should do another kitcar.

[@BCEngineer321]

With the Side exhaust did you get a dB reading? A couple of the tracks here in the North Atlanta area have sound limits.

[@matthewdefer8215]

You got a new subscriber and fan !! Great video

[@GearheadDaily]

Thanks! Much appreciated. :)

[@geneg1504]

Thank you for the video and explaining the questions the only thing I have to ask is are you gonna post more videos of you playing at the track or driving around town

[@GearheadDaily]

thanks! no, I sold it a long time ago

[@gowen_places_5471]

A Daytona Prototype livery would look awesome on this!

[@charlieryan1736]

Thanks for making this very helpful video

[@GearheadDaily]

Np. I have a few more where I answer more questions. Check out the channel list.

[@KaDaJxClonE]

Loved your VinWiki vid.

[@GearheadDaily]

Thanks!

[@thematrixgaming1810]

Hey I live out in Minnesota as well,Woodbury to be specific and I was highly intrested in the Grullon Gt8 kiy car and well as we know Minnesota is a hard place to find fun with cars but me and my friends were working on putting together legal car meets to attend and it would mean alot if you could review the grullon car/company and give your opinion on it.-Thanks

[@needmofishin5765]

That body style has been around for years now. Any word on getting the body style updated?

[@Lolatyou332]

Car looks awesome though

[@thefuture8173]

Been thinking about buying this kit for a few months now, and very likely to get it. hopefully within the next year!!!

[@GearheadDaily]

its a blast!

[@allensmith8953]

Do you have to mount the intake on backwards? What about people that want to run a supercharger? Is there sufficient engine to firewall clearance for a forward facing intake?

[@ssoffshore5111]

Backwards and people have installed a LS9 in these.

[@ThePerpetualStudent]

Why did you choose this kit over the Ultima Evo?

[@1s.e.c.racing304]

Just saw your vinwiki story and watched this video. Great job on the car it instantly caught my attention. I have built two kit cars from factory five and think this will be my next. You mentioned in the vinwiki story you had to make a lot of brackets and filler panels. My question is, how extensive was it to fabricate those and how much did you have two? Where there just some things specific to the parts you chose or was there a lot to mount to get everything mounted? Thank you for your time and any answers would be a great help.

[@GearheadDaily]

It wasn't too bad all in all, but things like the battery and shifter needed a bracket created. Its a lot of little things, but all in all wasn't really that bad, especially if you've done it before.

[@1s.e.c.racing304]

@@GearheadDaily okay that is good to know. Thank you for taking time to answer my questions. Hopefully be starting to build my slc soon

[@GearheadDaily]

No problem. Feel free to email me if you have more questions [e-mail]

[@1s.e.c.racing304]

@@GearheadDaily thank you again and sure will if have any more questions

[@Beanpapac15]

Is it worth building this over an Ultima for a less experienced builder? My understanding is that the ultimas are much easier to put together and cost about the same, although they have their own issues. If anyone has experience with either of these your input would be appreciated.

[@roberthooper8883]

no.

[@FixItNick]

I live in California, they just passed a new law January 1st, that if your exhaust is modified in anyways it’s a $1,000 fine and it’s not a correctible offense. I had no idea this was even on the books, I was shocked!!! The reasoning is to cut down on the illegal racers blah blah, just the stupidest thing I ever heard!!! I’m still gonna mod my exhaust and enjoy my cars, but I think the whole community around the country should know about this, there is a petition everyone is signing. CA man geez!! I need to get out of here!!!

[@GearheadDaily]

A better question might be, why do you still live in CA if you like cars!?!

[@FixItNick]

Gearhead Daily it’s an excellent question lol ... my job has me pinned, can’t leave it for 12 years,

[@FixItNick]

Gearhead Daily Just did a vid on the Cali exhaust fine in my channel, I’m hoping will gets more people involved, just makes me grrr, those criminals!!!

[@dieselguy62]

@@FixItNick unless your job is being an inmate, you can leave it.

[@spongesurf12]

Nick, you don’t really have the law information correct. Check the info from SEMA or Jalopnik. Exhaust can still be modded in Ca.

[@JakesMusicPalace]

Very nice job thanks for sharing

[@GearheadDaily]

Thank you too

[@joshc007]

It is really hard to find information on how to build one with a 20b Rotary. and good information forums or advice?

[@GearheadDaily]

Gt40s.com

[@brett9382]

How are the inside door panels. Is it like a classic car where you have to make them yourself or do they come pre molded in.

[@GearheadDaily]

They have both options, you can buy premade ones or make your own.

[@brett9382]

@@GearheadDaily thanks

[@briankostrba4897]

I apologize if i missed it some where, but I tried to look.. How is it getting in and out of the car?

[@GearheadDaily]

There's a whole procedure about getting in and out, mostly standing on the seat and sitting straight down.

[@TheLinKuei]

If Possible could we see a Vlog of you Catching the reactions of People. Im sure this thing gets crazy attention

[@theariesexperiment4642]

Would a Procharger aspirated 632ci Hemi fit ???? I gotta an ole 632ci Pat Musi 1360hp Hemi layin around that needs a home. Just curious.

[@GearheadDaily]

i wouldn't think so, its pretty tight in there with the LS but hey give fran a call and ask.

[@x0veN_trading]

Where in Minnesota are you located? I'm very interested in starting a build but would love to see it first hand. Are you open to showing it off?

[@GearheadDaily]

I sold it probably 5-6 years ago

[@kiearcotton9452]

Can this be done with a dual clutch trans with paddle shifters or an automatic trans?

[@GearheadDaily]

I dont see why not?

[@dennisprow7576]

How does one go about applying for a loan on one of these?? Any recommendations for lenders?

[@crazeguy26]

you can't is not a complete car. is just a frame and body and a load of parts.

[@clifflee5404]

Can get get carbon fiber panels? Would be awesome if you kept it in raw prepeg format. Also can you get a dual clutch transmission? On the GM site you can buy a crate engine with the 8 speed transmission. Only issue, can you get the paddles themselves lol

[@GearheadDaily]

I believe yes to all that, ask Fran at RCR

[@bmxriderforlife1234]

If they do have carbon body kit it'd be like 66k or more for the full carbon body. Few grand gets you carbon vents and stuff. But even full on with that brake upgrades carbon rims suspension upgrades and such you could probably get in with a nicer tranny and a decent ls or even an exotic for not too much. And less then alot of other exotics. Carbon body would cut weight. Meaning even less hp needed. Realistically even for a done build around 2600 pounds. You need less then a thousand to beat many cars going for over 300 thousand and contend with some cars costing millions. Big rubber traction control in the form of launch control and maybe after market traction control. But you could probably get it closer to a track car weight with all the street car features easily with a carbon body kit. Even with heavier engine options. If you did the right transmission work or got a Ricardo 260mph is possible in the slc. But it deffs be possible to get the unfinished carbon fiber option since it's basically fully custom body panels. Probably gonna do it for mine once I get other shir out the way. Pretty much decided I'm gonna end up building one of these. If the merc v12 fits. Then I basically have a Pagani self built. Vw w12 could fit. Easier to get a vw version cheap but same motor in Bentleys. Built toyota v12s exist. So some work is done already. Benz v10 has been done. Or maybe it was a BMW. Either way. May require some custom work but with the weight it doesn't need alot of power to compare to monsters. Even gaining weight on a swap. 700 to the rear wheels would be fast. Done right build the motor to handle boost. Keep it low and relatively tame there but boost controller down the line. Keep it easy on the engine stuff and use an ls and a good budget build for power and even with a carbon body kit I'd bet it could be done for 120k. Ls3 7k. Super charger and turbo kit for it. Could probably do the whole motor for around 14k. Think it's like 10k for a Ricardo or so used and rebuilt. Little cheaper for a Graziano. 48 for the kit or so. Say 66 for the carbon kit. And that'd probably be good for 1000hp plus twin charged bragging rights and no turbo lag. Or just super or just turbo. If you do a junkyard good condition block really cheap engine wise. So maybe a bit more all brand new but yeah 120 would be possible but hard. But under 150 easily 170 with super nice interior and extra shit plus probably some help with putting it together professionally and getting it dialed In. And be able to work up to that. Build it. Get the carbon body down the line. That's what I'm gonna do I think. Get it road legal built and running and reliable. Then carbon body kit. Figure out the color scheme for real paint with exposed raw carbon sections. Something I can dip or wrap over. Carbon rims. Inconel self built exhaust. Ti hardware wherever grade 8 bolts are needed. Aluminium wherever I can manage. Widest rubber in the rear I can fit with the grippiest tires lol. Think the one after market ecu I want to use that works for like every engine also offers traction control and launch control with the ability to turn it on and off. Ways to put a race level dual clutch. But sequential would be a in-between. But yeah lol even going all out with like full on expensive race bar bits. You could keep it cheaper then many branded super cars and faster to top speed but maybe beaten out by the Bugatti for top speed. And be easier to service and cheaper to service. With a race heritage. Plus since you need to see about mods if you do any and body mods getting the carbon done after seems smarter to me. Might also be able to find carbon places to do it cheaper. But that's what they charge on the rcr gt car for a carbon body.

[@atx103]

How hard would it be to turn a manta mirage into a slc I mean it's all fiberglass right so just a custom body on the manta chassis

[@GearheadDaily]

I honestly have no clue. Give a try and let me know

[@atx103]

@@GearheadDaily yes sir once I get it done how can I send u a pick or video.

[@highwaymen1237]

I am sure you have an idea what kind of lateral G-Force this car should pull with street tires. I seach the net but didn't find anything definitive. Thanks.

[@GearheadDaily]

That's a good question, maybe ask that of the guys at gt40s.com

[@highwaymen1237]

Does that indicate that your Superlite car is the same as the as a GT40 as far as lateral G force? A friend of mine has a Ferrari F40 that he tracks. My plans are to build or buy something for 1/20 the cost of his car to destroy his lap time. I am looking at these or a Radical Coupe.

[@GearheadDaily]

Not necessarily, probably more lateral-g's than a GT40. that website/forum is where people discuss their SLC builds.

[@bbdl7042]

You can get the upgraded suspension and put the best tires on the market and should compete with anything from the factory. Also what type of power you want and what tranny to use to help times.

[@highwaymen1237]

@@bbdl7042 I saw a video of someone in England that had their Superlite at a shop and they were refitting Bilstein shocks and they indicated that there were some issues with the suspension and they re-engineered it. Did Superlite address this and develop a revised suspension? Thank you for your input.

[@ambergarrison9738]

Do you build for customers or can you recommend?

[@TheGilmanja]

Hey Amber! Check out Zakari3030 on KZbin. He has built a number of these over the years and his work is incredible.

[@johnspencer2382]

I didn't read any of the questions and I didn't hear you explain why of this subject Are there rules/laws surrounding the building of these super cars. Manufacturers are required to put in airbags and many other safety features. Are the average citizen car builder required to do that?

[@GearheadDaily]

Not in my state, but laws differ so you'll need to check that out before doing anything.

[@Mimirsand]

Im kinda concerned about the fact the suspension is so low. Can it go over speed bumps?

[@GearheadDaily]

Yup

[@journeyreuma6990]

What about anti lock braking system? Can that be added? No power braking sounds lame.

[@GearheadDaily]

I'm sure anything is possible with a reluctor ring and an ABS module!

[@elgordosexy554]

Does it only come with manual transmission or can I get it to be automatic 🤔

[@GearheadDaily]

At the time it was only manual, you would have to look into it.

[@GrgBuiltCoyote]

I've been looking into this car and I am wanting to Coyote swap one of these cars. I have a 1965 Mustang that's wide body and I road race it, but one of these would be the next level to road racing.

[@GearheadDaily]

It is! faster than i can drive.

[@GrgBuiltCoyote]

@@GearheadDaily my Mustang, when it’s not broken, is on par with C6 corvette or modern sports car alike. Texas I believe has relaxed enough laws to get it road legal and registered. That would be a blast of a car to build and see stepping into a faster category of car.

[@rmp5s]

Think an RB26DETT will fit in one of these things?

[@bbdl7042]

rmp5s for sure and you tell them what motor you are using and they set up the mounts for it before you get it.

[@rmp5s]

@@bbdl7042 Awesome!

[@khalidhamad5286]

What seats can you you use for the car!

[@GearheadDaily]

The ones that comes with it! :D

[@user-ys9to2ie7k]

Any videos that you know of where one is running the Nurburgring?

[@GearheadDaily]

No, sorry I haven't seen any.

[@user-ys9to2ie7k]

@@GearheadDaily I have a C5 ZO6 with the modified LS6 and I can just imagine the handling and performance of one of these with the engine in the rear (behind the driver) and 600 lbs less. I would love to experience a Ride Along, let alone, drive one myself!

[@bryanemerson5619]

Does it require a lift to build the car?

[@GearheadDaily]

Nope! Check out my photo vid, all in my garage.

[@curtismills303]

Help me out. Where exactly is that list you showed? I must be blind or something. Very excited about building another car. Do you remember the Sterling kit car? I was the youngest to ever build one. I was 15 and in high school.

[@GearheadDaily]

The lost of prices and option list?

[@curtismills303]

@@GearheadDaily yes please

[@GearheadDaily]

Start here: www.superlitecars.com/slc-faqs or here: www.superlitecars.com/slc

[@vmoutsop]

I prefer to call them "User Built Component Vehicles" :)

[@markofexcellence5209]

How do you insure it and how does the insurance company determine what it is worth?

[@GearheadDaily]

Good question. Hang tight for a new Q&A video probably tomorrow or Tuesday. Sub if you can. Thank you.

[@davideudy7392]

Check with Haggerty you can ensure for however much you want it to be

[@beet4416]

Are paddle shifters available yet?

[@GearheadDaily]

Perhaps, I dont see why you wouldn't be able to modify an Audi set up or something

[@genemounce8302]

SLC vs 500whp '65 Daytona Coupe vs 2020 Corvette 3LT . . . . ughhhhhh soooooooo hard !

[@GearheadDaily]

Lol yup, all about the same price :)

[@hlulanichavalala6737]

Can you have it with an automatic transmission?

[@GearheadDaily]

if you can find one that fits

[@belisioglipet4655]

In an email Fran wrote that some were done as EVs. Have you seen any EV SLCs, maybe Tesla powered?

[@GearheadDaily]

Sorry, no experience with those.

[@jhonhik1207]

Is there enough space for a turbo setup

[@GearheadDaily]

Sure. I dont see why not

[@jhonhik1207]

Gearhead Daily someone should make a electric SL-C

[@AnomalousOne1401]

If you check out his Vinwiki videos, he mentioned an SL-C build that Stacey David did using an LS7 that Stacey built at the GM facility back when GM would let you build your own crate motor program. Schwartz performance built a Twin turbo package for it. Keep in mind that the bottom end of the LS-7 had to be “Beefed up” to handle the turbo setup. An electric SL-C? I heard you can order a Mercedes with just an AM radio? Just because you can doesn’t mean you should.

[@firaschaabani2404]

Can I fit a 4 rotor engine?

[@GearheadDaily]

I'm sure

[@eLm0Rr]

Can you buy one already built ?

[@GearheadDaily]

yep.

[@jackisback4949]

Could I put an eco boost v6

[@GearheadDaily]

sure I don't see why not

[@anthonyhunt701]

Do you have a/c in it?

[@GearheadDaily]

Yep! its a necessity

[@mineralgrey8332]

$60k for this unique super car? Sign me up, but where would you go to buy the overall kit?

[@GearheadDaily]

Yep! www.superlitecars.com/

[@cyrxl]

A driving video from the inside would be neat

[@GearheadDaily]

Check out the list of vids i have, many of them are driving. kzbin.info/www/bejne/bJere4uder1_iac

[@whiteandnerdytuba]

When are you dropping the v12ls in yours?

[@GearheadDaily]

I'd have to build a new one to do that :/

[@whiteandnerdytuba]

@@GearheadDaily do it. I'll take the white one off your hands while you work on it

[@GearheadDaily]

@@whiteandnerdytuba sorry dude, that's been sold many years ago

[@danielevola5300]

it can be registered in italy?

[@GearheadDaily]

I don't know you'd have to check with local authorities.

[@maxboya]

Can you make it AWD? That is the real question. No pictures of the underneath

[@GearheadDaily]

No one has tried it, but many have asked... No.

[@chrismanning1171]

I am 6,1 @ 220lbs. Will I fit?

[@GearheadDaily]

Yes I'm 6'1 and 200

[@paulbowler7775]

Can you bring it to Canada and lic it for the road

[@GearheadDaily]

Not sure, I dont know Canada's laws

[@ChaseEHp]

Can you put a 2jz in it

[@GearheadDaily]

I'm pretty sure you can.

[@ze_german2921]

Why did you sell it? All this work to only get rid off? is this kit car junk?

[@GearheadDaily]

No, i enjoyed it quite a bit and its an extremely capable car to drive and race.

[@MegaAli213]

Then.....why sell it 🤔

[@MegaAli213]

Just curious.

[@ze_german2921]

Gearhead Daily thank you for the reply, I’m very interested in a car like that just planing what to dump my money on. I’m debating on the Radical. I see used race version for 30k euros with a Honda engines. I used to import and export cars so getting one from Europe is something I’m not afraid of. Good job on the build sir!

[@adampacanski7811]

How much does it cost

[@GearheadDaily]

Check out the faq video for the answer

[@08halit]

For the money you get a 911 turbo,GTR,M3 and some other nice tunable cars,,i mean 40k and some more,i dont think u get the engine to with the gearbox and you are to build it your self,,the building part i can understand but not the amount they want for an empty shell

[@GearheadDaily]

This car is infinitely faster than any of those cars.

[@OrderedFiber43]

How is insurance?

[@GearheadDaily]

Pretty easy for me, its a 'pleasure' vehicle, so agreed value was fine.

[@zoxkxr6552]

Will it fit a 2jz?

[@GearheadDaily]

Yes. Easily

[@zoxkxr6552]

@@GearheadDaily now i know what im going to save up for

[@rhythmtreble7311]

I loved the story about the butthurt neighbor! his fault for not gettin on that

[@lamborghinidaniil]

Just so you know guys, I could get you a BMW V10 engine for 15k ready to go with 640hp and 0 miles and on top of that a warranty 30k miles. BMW came out with 5.0L and this one is with 5.5L stroker. Wicked. There is a 6.0, but that's 30k with shrick camshafts and the sky is the limit on these engines honestly. You can have a 60k V10 Engine with some crazy engine components and an eye watering redline of 8.5k

[@ze_german2921]

By the Time you do that, might as well buy a Audi R8, but realistically LS would be the way to go, Small compact engine that makes plenty of power. You could buy a 4.8 or 5.3 for $7-800, add a supercharger and make +700-1000hp E85 and when shit breaks, parts a very cheap.

[@bmxriderforlife1234]

@@ze_german2921 junk yard build isn't the theme of the build plus a 7k ls3 is the budget option. But some weird engine options could be had cheap. But 15k v10 with warranty is okay. Rebuild a vw w12 cheap. V12 Toyota. Some used audi have v10s. Stuff like that for budget exotic.

[@gpracer270]

Ski-U-Mah! from Alabama!

[@GearheadDaily]

SKOL! Well, we'll see tonight! Gophers didn't get it done on Saturday. :(

[@Mpsinghgrewal2]

Would you be interested in building me one?

[@GearheadDaily]

Nope

[@jongonegone1262]

SO THIS IS WHERE THE NEW TOYOTA SUPRA IS HIDING ??? SOMEBODY CALL TOYOTA AND LET THEM KNOW I FOUND THE 2020 SUPRA.

[@gtrguyinaz]

How much

[@GearheadDaily]

I answer that in the FAQ video

[@nBodyResearch]

Why did you sell it man😕

[@clowns8421]

hes a fraud

[@Ebackfive]

I don't see anyone showing off this car like a real exotic any were please make quality full HD videos on this car I'll watch the whole 2 hour video if he has HD quality

[@GearheadDaily]

Did you look at my past videos?

[@danielmottweiler]

Has anyone ever installed a high hp Audi 5 cylinder engine in one of these.?

[@GearheadDaily]

not that i'm aware of

[@markburton9614]

For anybody interested in these types of builds that has the skills and tools but does not have $60K for a car they can read about the Midlana build and decide if it's for them.

[@osamabinladen824]

Link? I'm really interested!

[@Unc_Talks]

I wanna see an electric one. That is all...

[@GearheadDaily]

You and me both!

[@icutmyselfha]

would like someone to put a Tesla motors in this and push it even harder.

[@GearheadDaily]

Love to see that!

[@Happymali10]

This seems like an awesome car, but it's oh so illegal in Germany :(

[@GearheadDaily]

? it is?

[@Ebackfive]

Can we please get a full channel of videos with HD quality of driving and washing and reving and daily driving to the store and reactions when people see you PLEASE@@@@@@@@@@#######@@@@@@@ all the videos up on the car are really poor on what's going on with the car it's annoying Pretty much like how dougee rates he's cars

[@GearheadDaily]

Did you look through my older videos?

[@rkwjunior2298]

I want to put in an RB26TT

[@ThePerpetualStudent]

YES!

[@Shamrockjason]

50k is a chunk... Cool car though

[@GearheadDaily]

Thanks, closer to 60k fully finished, but I get it.

[@jeffdickson902]

can,t here a word your saying and i have my volume turned up all the way.

[@GearheadDaily]

Yep, sorry about that, i was having mic issues, I've cleared that up since then.

[@Gargamoth]

Curious, if you obtain an MSO, why register the car. We all have a Right to travel on public roads. A major manuacturer like toyota ford etc wont sell you a car MSO. Thats a major problem in the America. It is totally lawful to travel without registering. Police just harrass people of this and its wrong.

[@bmuns6445]

Can I get this car and install a 1,000 hp battery engine?

[@GearheadDaily]

Its your car, do what you want.

[@TheArtofBoxing101]

Cool car... I get it and all to have a really unique car... but I mean Jesus with 1/3rd that price you can build a lighter much faster MR2 Spyder or something. Or an Exocet.

[@GearheadDaily]

Theres no way an MR2 is faster than this. The slc has set track records.

[@TheArtofBoxing101]

@@GearheadDaily Just saying it's sure as hell possible to make em as fast with waaaaaaaaaay less money... you should see some of the MR2s in Japan.

[@GearheadDaily]

... as fast... for a 1/3? As you said.... for $20k, you can make an MR2 faster than an SLC... is that literally what you just said?

[@TheArtofBoxing101]

@@GearheadDaily For 20k I'll make it faster.

[@GearheadDaily]

Go for it... show me. Prove me wrong.

[@bmuns6445]

I would ditch that ugly ass rear wing. Maybe go to UCLA and have engineering students CAD design a better wing.

[@GearheadDaily]

Good for you, I'd go do that. When you do, let me know.I'll wait.

[@clowns8421]

rip off