Gen2 Bosch ebike display battery replacement

[@mhoffm]

And 4 years later, this video exactly solved the problem that I was having with my bike battery and display. Pressing the little button you demonstrate at :23 seconds on the battery did the magic. Thank you!

[@mikeb1039]

Did this today in about 25 minutes and that included 10 minutes drilling out the two screws I stripped. Easy peasy. Another 10 for that silly skinny gasket.

[@MannheimBR]

Thank you so much for this video! Following your steps solved my problem completely! After struggling with those 2 screws covered in goop, I simply drilled the heads out with a small drill bit and relied on the remaining 5 screws to hold the unit together after soldering in the replacement battery. Bravo to you for posting this video!

[@mikeb1039]

I did the same. Add a dab of sealant over the now open screw holes.

[@2011Cambodia]

Great help - only caution loosen screws evenly- unfortunately I didn't and broke 2 plastic posts. Waiting for new battery to arrive.

[@ricardoarrarte1451]

Great video. Thanks a lot. I had ordered a new main battery, like for 800 $, but it did not resolved the issue !!! My Haibike has like 6000 miles so I thought the display turning off was caused by the main battery going dead. It was not. I switched displays with another similar bike and it worked fine. I will get a new display since I am pretty sure I will screw up if I start the soldering process you presented and executed with great detail. Thanks again !!

[@jimthompson2085]

I too had the exact same problem. I ordered the battery months ago on Amazon. It was time today to put it in. Great instructions. My battery was swollen up 3 x thicker!!! Exacto knife for the goop and #0 phillips and soldered in just as on video. Thanks for taking the time to do this.

[@steerage250]

Great video - thanks. For those wanting to order a new battery before getting their controller apart, the dimensions of the original battery are about 30mm x 20mm x 4mm. Do not exceed the 20mm width as it has to fit between the spring contacts with the back, and a bracing post.

[@tarickw]

Can confirm those dimensions are correct. Mine was a bit taller though at 5mm, so there might be a bit more space in there

[@Brian-Campus]

Thanks for the detailed walkthrough! Was helpful to have confirmation regarding battery details, etc.

[@samdeur]

thanks for the vid.. mine is still working.. but this vid is going in to my diy folder. i typed in "502030" on amazon the netherlands and got enough hits. Your vid was / is a great help.. Take care.. Thanks again.

[@MrTeusz]

Had the same problem with my Hercules bike. I've ordered replacement battery and can't wait soldering. Thanks!

[@davidh5745]

Thanks for the great and helpful video. The screws take a #0 size phillips head screwdriver, which is typically found in a "miniature screwdriver" set for detail work. A #1 or (more common) #2 will likely strip the screws. I was able to scrape away the waxy screw lock material over the middle screws with a tiny straight bladed screwdriver and clear the path before attempting to remove the screws.

[@createthisdotcom]

Good point. I used a #0 Stanley screwdriver in the video.

[@khun1pla]

Hey Bro , you are very good. Not the Superman, like many other Videographer present themselves. Also the hint with the danger if the amateur cuts both wires together, was perfect. Good man. A small hint from my side: Take a picture of the board before you do modifications.

[@sriniramanathan]

Thanks for the excellent video. I did this as outlined and my device did not restart unfortunately

[@createthisdotcom]

That sucks. Did you test the battery with a volt meter (multimeter) and confirm it has sufficient voltage? Also double check the polarity.

[@kyrmelia56]

Vidéo Super bien faite ! merci. Remplacer ma console = 120 € j'ai donc acheté la batterie en Chine (seul endroit) 6 € mais 2 mois pour livraison. J'ai tout fait comme vous disiez, et Magiiiique ! c'est super enfin ma console remarche pour 6 € ! Thanks A LOT !!!

[@lienbijs1205]

Before doing this you can first check if the battery is really death by trying to charge it with a micro usb cable first.

[@peterdeeley8051]

excellent video. skills far beyond my pay grade. Will buy new one!

[@samdeur]

was fun to watch.. btw i also leave the computer off most of the time.. so this will happen to me to eventually.. i have no choice live in a apartment my bike stays in the basement garage accessible to everyone living in the complex so i want to keep as much stuff off the bike as possible .

[@nf4505]

I had the same problem, but all I did was put 4volts to the battery terminals , not the wires, for about 5mins and it brings the battery up to 4 volts and it's been working ever since. Happy Days.

[@tibodef]

Thanks you very much. This vidéo was exactly what i need.

[@createthisdotcom]

You’re welcome!

[@kilastrika]

So this is definitely the issue I have. I havent open my unit but I can swear by the battery being dead. I always take the unit off to prevent theft. I usually charge the bike and the head unit might be in my coat. Not once did anyone notify me of the charging process. I'm now looking to buy a solder kit and batteries off amazon and they will be here in a months time. The dealer for my bicycle has not yet gotten back to me except basically troubleshooting. What a silly design flaw... if youre not aware of it.

[@michellaurenceau5890]

Really a good and complete tutorial. And createthis has really good skills in electronics. It becomes easy to solve this issue. Thank you.

[@samdeur]

i would apply sum silicone grease to the gasket never hurts and is good to keep the gasket healthy and the seal waterproof.

[@khun1pla]

to your final statement about the reason of malfunction: as i know the manual says you have to remove the main battery if your bike is not used for longer periods.

[@PaulStewartPositivePaul]

Thank you!

[@tyros202]

thanks fo the instructions, it works perfectly!!!

[@hilminalbant9553]

Hey, the display is broken, is it possible to change only the display, if yes, where I can buy it?

[@samirahley]

Hi, Thanks for your video as it helps a lot. I have a question as i need to replace my display. if i buy one i need to program the display with the bike or just replace it and all works fine ? Thanks

[@samdeur]

funny thing.. all while you where de-soldering i was thinking ok.. top one is negative.. after you said i'm going to pause the vid.. i thougt. ok i'm going to mark the pcb negative with a black marker..

[@Topper_Harley68]

How old was the unit? I have the Nyon and the battery went within one year. Got a new on warranty, next time i might have to solder myself.

[@martinanl1]

I first put my bike computer in the charger ... and it works, maybe it is better to charge it and if it doesn't work, then renew the lithium battery

[@tibodef]

Thanks you. I got the same issue on mine

[@deanalainv]

Great !!! Thx

[@nisouck6514]

Thanks; perfect, I save my Intuvia.

[@tovedahlberg6612]

Please first try to charge the battery via the usb. My charger for my samsung phone works very well for this. My display died today after exactly 1 year use. I am now chargeing it.

[@alexcrypto2665]

Did it charge tho?mine is charging right now but it goes on/off while charging

[@AboutFocusTV]

Yes I'm also having this problem and like you trying to charge via the USB port. Mine also goes off while charging so not sure this will work. One work around I have found however is that if I connect a usb power pack to the head unit whilst it is in its handlebar cradle I can switch the bike on and it will work. Not a permanent solution so hopefully the usb charge will work, if not probably have to buy a new head unit.

[@epicsdrummer2010]

@@AboutFocusTVI could not charge the Intuvia battery. The Intuvia is only a few years old.

[@epicsdrummer2010]

This worked for my Intuvia for a few months. The battery appears to be defective. Why is there not a recall? 6:22

[@lewisgreen5188]

Thanks. Works again.

[@Jandejongjong]

Nice video, we needed this!

[@26687rs]

Thanks for the video @createthis. Did your odometer keep the miles or did it reset? I'm concerned of losing odometer miles.

[@Jandejongjong]

Odo doest reset with empty battery. Only clock and trip kinda stuff

[@26687rs]

@@Jandejongjong appreciate your response. Thank you

[@harbuzadrian7257]

good evening can you tell me if after you changed the battery, the general mileage was reset ?, or was it memorized? thanks

[@createthisdotcom]

I’m pretty sure it kept the mileage.

[@Jandejongjong]

Take out a screw because of empty battery or 100 buks... Press hard so screw driver hard into srew don’t let it slip

[@SaSaaVirus]

Just for the info leave the battery in the bike and charge it like that it will charge the console battery to

[@createthisdotcom]

I think it only charges when the bike is on though.

[@alexcrypto2665]

I got the same controller as you but it started to not work anymore.what could be the cause of it?

[@HexPulsion]

Thanks for this valuable tip. I have the same Intuvia. Isn't there an issue innstalling a 250 mA instead of the original 500 mA ? Your point of view shall be appreciated.

[@HexPulsion]

I checked on Amazon that the original battery exists : @t

[@talia7084]

What does it mean if nothing happens when I press the on button on the battery?

[@createthisdotcom]

Either the battery isn’t charged or it is broken.

[@michael_mouse]

6:23 ...just a bit of point... why do Americans say 'SODER', when its spelled 'SOLDER'... its got an 'L' in it... use it, darn it!

[@createthisdotcom]

Where are you from that you pronounce the L? I think it’s strange that we don’t pronounce it too.

[@michael_mouse]

@@createthisdotcom Engand... ;0)

[@tarickw]

Does the head unit battery charge from the main battery? And does anyone know which chip is the lipo charger?

[@createthisdotcom]

It does charge from the main battery and newer versions appear to be capable of turning the head unit on periodically every so often in order to recharge the battery. I don’t know if that is a firmware upgrade able feature though.

[@bulentmalgaz2608]

Crap Bosch battery. 1 year, always on the back, and now I got the same issue.

[@chucknorrisoftheday]

I have done as you suggest at the start of the video and I can get the controller to come on by pressing the reset on the battery. Will it work as normal once it is on so can I continue to use it in this way? It's not a great problem switching it on this way every time but I am not clear why this works and if the unit once it's on will continue to function during a bike ride as normal. Any advice would be helpful thanks.

[@zdenkorakitnican6093]

Makes sense my display keep going off during the ride and I have to restart it .

[@createthisdotcom]

I’ve never had that happen before. Is this perhaps a contact issue? Carbon on one of the contacts or a worn spring?

[@zdenkorakitnican6093]

@@createthisdotcom I'm not sure I didn't check on it but it's definitely strange and I'm worried a little sometimes as when I'm like 20miles away and if it wouldn't turn back on I would have to Pedal back a 60p bike with no assist

[@royswisjshwk3167]

@@zdenkorakitnican6093 hi! I have the same problem and i feel lucky that i found you. I hope that the problem was the battery!?

[@zdenkorakitnican6093]

@@royswisjshwk3167 no it looks like a connection issue

[@royswisjshwk3167]

@@zdenkorakitnican6093 i will check it. Thank you very much

[@peterdite6725]

The crucial part where the pieces come apart you've skipped

[@Jandejongjong]

Those battery’s suck bigtime

[@samdeur]

watching at 11:02.. hahah exploid....

[@HexPulsion]

I checked on Amazon that the original battery exists : @t