Gen3 Tacoma Double Cab Rear Seat Delete, Goose Gear DIY, 3D Model & Plans

If you are a fan of Goose Gear but don't like the prices here are some plans for you to build your own. Use this link (drive.google.c...) to download a zip file that will contain a PDF and a USDZ augmented reality file.

[@JohnMichaelFloyd]

I just completed this build myself! The dimensions worked well but I cut the side support walls near the driver and passenger foot so I could stuff shoes or something small into foot space. I just used 1/2” plywood which is strong and lighter. I used M6x1 bolts through the bottom seat panel and 2” M6 bolts to the back panel too. One thing that is missing on this plan is he little extra aluminum you will need to save for the latches to keep it in place. First impressions: tons of space and feels really secure. No rattling or wind noise if you keep the insulation panel behind the seat. Took me 2 days and I used a circular saw and jigsaw for most of the build

[@roundcheesewheel]

I am taken back that you are willing to share this hard work with us. I just read through the PDF and it's so well put-together! Thanks a million. Perfect fall project.

[@stvhwrd]

This is awesome, thank you very much for sharing the product of your talent and hard work. Ridiculously helpful, you're a legend.

[@ChefRov]

Only 22 likes?? And the effort and specs! Like a true engineer... thank you. will take these plans into consideration as I delete my rear seat new taco pro ;o)

[@MANOLOM123]

I don’t have a taco but this video is awesome!!!🎉

[@TheBraps]

Just found this and OMG this is amazing work. Thank you so much for making this available

[@hughb5092]

Thanks for doing the hard work for us.

[@MidwestAdventures]

Wish you something like this for my access cab! Awesome work.

[@mariotoscano1864]

You are the man!!!! Thank you big time

[@wdj935]

Thank you very much

[@ashleydeevee]

Thank you for this! I searched these comments as well your associated posts in Reddit and Tacoma World, but didn't see anywhere that someone with a 2nd Gen had tried this yet. Do you know if anyone has? I'm going to template the hell out of mine and use your plans as a springboard to awesomeness.

[@donnaenderson9495]

I’m considering doing a back seat delete to my Corolla for my GSD

[@ryanlowe2571]

Correct me if im wrong, i think a few measurements are missing. One being the length from door side to the two smaller hatches (on the bottom) and the second being floor side to the hatches (on the side).

[@ashleydeevee]

Any chance you figured out these measurements? We are trying to puzzle this out also.

[@ryanlowe2571]

@@ashleydeevee just had to get in there and measure myself. It doesnt need to be too precise, plenty of room to work with.

[@ryanschlotfeldt1070]

One question is how you attach the bottom piece to the seat hinges? The holes aren't threaded so you can't just send a bolt through?

[@CharlyCoulange]

What hardware did you use?

[@tobycrisp1215]

i am wondering if you removed the storage bin that holds the jack? it would impact the overall height of the surface so jus want to double check before i get started. thanks for all of this work you've shared, i really appreciate it !

[@TinyHouseGuy]

the plastic tray under the seats was removed. The wood deck attaches directly to sheet metal. In fact i drilled thru the flanges for the jack compartment to bolt the wood deck down. Everything i did was 100% reversible if i need to sell the truck.

[@THOREHAMMER2340]

Can it work for a second gen?

[@ashleydeevee]

Also wondering this.

[@le0nida525]

X2

[@Mtdubba]

Hey brother; what software is shown in this video/do you generally use including the 3D imposing (architect here)? Thanks and great work on both this and tiny home stuff!

[@TinyHouseGuy]

Its Shapr3D....great program. Its great with the apple Pencil on an iPad. They now have a version that runs on a mac.

[@Mtdubba]

Literally have an iPad Pro and mainly what I use for design… just made my day. Thanks chief appreciate you!!!

[@moscaman559]

Will this work with the new Gen 3 Tacoma? I have a 2022 and just wondered…. Thanks!

[@TinyHouseGuy]

should fit any gen3 Tacoma...mine is a 2019

[@brendan9293]

This is awesome. What thickness of plywood did you use?

[@TinyHouseGuy]

3/4

[@golfwhores7115]

Is the link not working or are the plans elsewhere? Thanks dude!

[@TinyHouseGuy]

try here: drive.google.com/file/d/1U-PcrJ_OwF7ajm5OwOLf95KALH6COhga/view?usp=sharing

[@christopherlampron8817]

Any plans to lay out a half seat delete? Great work!

[@ericyoumans796]

I’m doing the 60% side. What about you? Just removed the seats and what’s not and starting my plans.

[@bustosne4]

Are the seats permanently deleted? Could you take this out and put the seats back in if needed?

[@TinyHouseGuy]

I have them stored in contractor bags in my barn. Will take about 30 minutes to put them back the way they were.