German and Swiss Oilers Pressel Reilang Hazet Gedore

[@HardKnocksForge]

Want to know which bottle is best for ATF/Acetone mix? I show you in this video here at the 00:57 mark kzbin.info/www/bejne/iZazkpWrZtidhqM

[@Toyotas_n__Tools]

www.ebay.com/itm/SK-Tools-5pc-SAE-Wrench-Set-5-8-1-Made-In-The-USA-New-144-00-Retail/312229318836?hash=item48b25150b4:g:KqMAAOSwjW5bY3lA www.ebay.com/itm/Husky-22202-3-8-inch-Quick-Release-Ratchet-8-Long-Brand-New-Made-in-the-USA/382550374158?hash=item5911c7770e:g:WdUAAOSwwZtaagrZ Those made by sk?

[@Toyotas_n__Tools]

I really want one of these! www.ebay.com/itm/SK-3866-1-4-Inch-Drive-5-1-2-Inch-Full-Polish-Fine-Tooth-Palm-Control-Ratchet/382550364311?hash=item5911c75097:g:~4AAAOSwesVbNVUy www.ebay.com/itm/SK-S-K-9pc-Metric-Spline-Socket-Set-8-19mm-Brand-New-Vintage-Made-In-USA-129/382555866068?hash=item59121b43d4:g:nVMAAOSwaM1bZOIO www.ebay.com/itm/CR-V-1-piece-Hex-Ball-Keys-Made-In-Tbe-USA-New-1-5-10mm/382534626187?hash=item5910d72b8b:g:uaYAAOSwuMNbZLDy

[@robotvacuum1957]

Those damn Swiss got their stuff together! Not only do they make great watches but oilers to! Great video sir!!

[@HardKnocksForge]

Bobby DaBoss Salvadras I'd say they are the best at both, for sure.

[@802dieselcrew8]

That's a lot of pumps, cool units.

[@Wrenchesandboards4u2u]

I really like you tool reviews keep thim coming

[@HardKnocksForge]

The cheaper Pressol oiler is great for that ATF/Acetone mix in the other video. It's what I've been using for a few months and it's still going...

[@RoyMarkosGarageRMG]

great review, and good to know more about the Swiss and German made oilers.

[@HardKnocksForge]

The little guy is awesome for ATF/Acetone mix. Which is the best penetrating and rust loosening fluid out there.

[@chrisjones6165]

My drill press needs one!! Thanks for showing

[@HardKnocksForge]

I gotta say the Reilang one with the atomizer tip is hella cool being able to pump upside down and all. I have had ATF/Acetone in the small one with the plastic bottle and it's held up awesome, and that's some really corrosive stuff.

[@HardKnocksForge]

I added links in the description at the very bottom. The Reilang are at the www.jensputzier.com/reilang/reilang-oilers/ website.

[@scottpearsontoolsmore185]

Great video thanks brother. Great review on The oiler's. Keep up the great work see you in the next video

[@mdlee52]

Which one would be the best for the ATF and acetone mix?

[@HardKnocksForge]

The smallest one on the table with the plastic bottle. Video update on how it's been handling the ATF/Acetone coming up soon-ish.

[@davidyoung6608]

Very nice dude.

[@ikkiiiieee]

Would the smaller HDPE plastic 10933 with the plastic inners be good for thinners/hydrocarbons? As WD40 is like half hydrocarbon/thinner. Worried about evaporation and degrading of the plastic

[@johnclintonmusicandmore]

good oilers nice video

[@yourtoolssuck1459]

ive been trying to find a good oiler, everyone ive tried always leaks. im ordering some of those reilangs. they look beautiful and extremely well made

[@HardKnocksForge]

They are excellent. The little pressol actually works really well for highly corrosive fluids.

[@Leigh_Leigh]

Great review HK! Maybe a high dollar Olive Oil container. 🙂🤔

[@HardKnocksForge]

leigh shahan It'd be a very high dollar EVOO sprayer, but I'm sure it would squirt it out if you put it in there. I wouldn't do it with the one I have because the olive oil would taste like ATF and acetone, 🤢🤢🤢

[@Leigh_Leigh]

Hard Knocks Forge 😂😂😂

[@chaddles623]

Good video but ya didn't show the inside of the Reilang double pump version or the Pressol.

[@HardKnocksForge]

Roof Repair Techs yeah I had to cut some stuff out, but the inside of the double pumper is shown in the thumbnail. The Pressel one I still have I'll show in the next video. It's actually held up really well to the ATF/Acetone mix. It just drains what's in the spout out and since it's so thin some gets on the top of the oiler. I wish there were a place guys could buy them. KCToolCo doesn't seem to have any of the smaller ones anymore which are the good ones. Might have to check amazon.de

[@paulmanhart4481]

The pump handle on my Reilang is stiff. When I finally get it squeezed down, the oil shoots out in a 6’ stream. Do you know if this can be adjusted? Thanks, Paul

[@HardKnocksForge]

I’m not sure if you can adjust the spray but it sounds like you could have something stuck in it.

[@paulmanhart4481]

@@HardKnocksForge I took it apart with oily hands. When I put it together again, it worked fine. Just needed some oil. Go figure.

[@HardKnocksForge]

@@paulmanhart4481 glad it’s back up and running again. They’re pretty slick oilers…

[@paulmanhart4481]

@@HardKnocksForge yes they are. I’m spoiled now.

[@bunkerfest]

German tool reviews notice oil discoloration, most likely because of a reaction with the metal on the rebrand hazet one.

[@HardKnocksForge]

Yeah if you put anything at all corrosive in those that have brass they tend to tarnish and get ate up. The little Pressol (white plastic body) doesn't have any metal parts in the actual pump and it's been holding up great to my ATF/Acetone mix.

[@WaschyNumber1]

Reilang have also yello plastic ones

[@HardKnocksForge]

Are they a European only thing or are they available in the USA also?

[@WaschyNumber1]

Hard Knocks Forge i found them on maccmodels.co.uk/reilang-oil-cans.html

[@HardKnocksForge]

Thanks for the link, and they are quite a bit cheaper for the plastic ones.

[@WaschyNumber1]

Hard Knocks Forge ;-) 👍

[@corymanuel7639]

"If you can get the tip in, you can pump it" Thats what she said 😂😂

[@HardKnocksForge]

Just the tip and only for a minute...

[@chrischiampo8106]

Pumping , Get The Tip Deep In There , Lube n Priming 😮🤨 Damn Knocks Sounded Like a Girl I Knew 👩🏻‍💼🤪 Lol

[@HardKnocksForge]

Pretty sure I know the same girl...