Dyna forward controls reduced reach conversion kit installation

[@DennisD9799]

Got installed without breaking anything, Really nice. I was able to remove extended reach seat😊😊.Good video!!

[@bluesriderDF]

I feel like it's always a success if I don't break anything..😃

[@DennisD9799]

@@bluesriderDF Yep!

[@Musashininja]

I would have left that bolt you bought just cut it shorter. I have the same problem and you described it perfectly about your feet floating and my right foot sliding off the peg. I also had a knee problem bending around the stock air filter the old arthritis thing. Switched to a SE heavy breather and the problem is gone. Must do that install myself one day soon before my next upcoming long ride. Thanks for the video. Cheers!

[@bluesriderDF]

Glad you liked the vid, thanks for commenting 😊 I have the SE Ventilator intake, way better than that giant stock monstrosity!

[@johnzito2114]

Hi, I just did this kit on my 06 Dyna. The kit I used was from Vtwin mfg. The brake pedal ends up pretty far up for my taste even with the rod threaded all the way in. I ended up taking off the jam nut and the position is pretty close to perfect for my taste. I plan to remove the rod, have about 3/4 of an inch taken out of the straight section and then of course welded together and reinstall. I have seen quite a few others comment on the rod being too long and also very close to the exhaust or front bracket depending on adjustment. The left side is a breeze. The right side seems like it just about fits with zero room for error or adjustment. Now in my case if the nut on the master were to somehow miraculously slowly loosen up, it would drive the rod out and pedal up so i'm really not worried but I think this kit is very good exception of the rod and also Vtwins bolts are too soft. Thanks for the vid BTW.

[@bluesriderDF]

Thanks for the details, I'm sure this will help others. Fitment worked out great for me. The only problem I had was getting the old brake lever assembly apart as you saw. I think the previous guy used red loctite. I probably should've tried to heat it up. Oh well, it only cost me a special order bolt. I'm loving 'er now!

[@josephmueller9777]

I just did it and it is close to the exhaust. I think since I have the stock rod cutting about a inch out and rewelding it. The brake pedal is so high now, I would like it to sit more forward

[@Chikyn42]

Just ran across your video, putting these on today. Your about 2 exits away from me, i thought i recognized the road in your test drive.

[@bluesriderDF]

Ha, cool! Salty out there.🤬 I think the bolt I couldn't break free was installed with red Loctite, so if you have trouble, use a heat gun.

[@Chikyn42]

I wish loctite was my problem today. I’m replacing every fastener because they’re all rounding out. Glad I have the backouts and a load of drill bits. Lol

[@bluesriderDF]

@Chikyn42 Oh man that stinks!!

[@Chripiter]

I'm doing right now, and mother ducker, same problem, t45 won't fit into footpeg,lol. And it's 8 o'clock on memorial day weekend so I'm screwed. I put it back together and will have to wait. I also ordered mini footboard to help with that forward control issue. I'll let you know how it works out. I'm riding an 03 wide glide with factory forwards. Thanks for the video,it's playing in the background

[@bluesriderDF]

Wow buddy that stinks. I was not able to get that 1 bolt out, and some people said it was probably in with red loctite. So it would have needed to be heated up pretty good. Keep that in mind.

[@Chripiter]

@@bluesriderDF or a grinder somehow lol. I have those short t45 sockets, and it wasn't long enough to fit in the footpeg thing. I'm always amazed when something I buy, with ebays " guaranteed fit" actually works. Seems like I'm sending more stuff back than keeping.. I'm most likely converting to mids controls over the winter. Have a good day man, stay safe out there.

[@bluesriderDF]

I just wanted to mention midway through where I had to drill out that bolt... someone said it was probably attached with red Loctite and probably needed to be heated to be removed. So if you have a problem like I did you can try that.

[@bodeine454]

Yes this is what I did when I took mine off to clean and lube the moving parts. My propane torch caught on fire 🔥 while I was heating the bolt and scared the bajingles out of me, I thought it might blow up in my face (it was an old torch, the O-rings in the valve were worn or dry rotted). But it worked out pretty good in the end.

[@bluesriderDF]

@@bodeine454 Oh man!!! I guess it's OK to laugh now, right? Glad you didn't get hurt.

[@bodeine454]

@@bluesriderDF Yeah, it was scary for a minute but I was able to put the fire out pretty quickly. I soon got a new torch after that.

[@brianch111]

Is your bike a switchback? I want to do the same kit but I see conflicting websites saying it won’t work on the dyna switchback. Thanks for the video!

[@bluesriderDF]

Hey buddy it's a Dyna Low Rider. Or I should say "was". It was totaled in a deer collision 3 months ago. 😢

[@brianch111]

@@bluesriderDF wow. Sorry to hear. Hope you made it out injury free.

[@bluesriderDF]

​@@brianch111kzbin.info/www/bejne/rHXamKGsZbGNj80

[@ericrhinehart5434]

I suspect red loctite was on that bolt that sheared the torx bit killer

[@bluesriderDF]

I bet you're right.

[@edsantillo2562]

Thanks for the video. Bought an 03 Dyna and pedals are too far forward. Im 5'7. Just ordered my kit from JP Cycles.

[@bluesriderDF]

They make a big difference, I hope it makes it more comfortable for you.

[@diegozuniga6292]

Can You share they link of the kit? Thanke You ... Have the same problem @edsantillo2562

[@bluesriderDF]

@diegozuniga6292 Please see the video description for the part number. I wpuld paste it here, but my phone won't copy it.

[@diegozuniga6292]

@@bluesriderDF Thank You buddy but in HD page said it would not fit to My 03 wide glide ... So i look for they JP cycles kit but i coulnd find it

[@tommyhunter9641]

Nice video. I was wondering about the engine guard mount to the down tube of the frame with the U-Bolt. Is that your fix to add the engine guard or is that how Harley does it? Either way , if it works it's good. Thanks.

[@bluesriderDF]

That's the way the engine guard came. Thanks for posting. 👍

[@anderssundqvist]

Great and informative video. Is it alot difference in angle on the brake/gear pedal if you compare the before and after?

[@bluesriderDF]

No change in angle on the brake side. If you look at the video thumbnail pic you'll see the angle is the same. On the shifter side, you can loosen the shifter and rotate to where it feels good. I moved mine a slight bit. I am incredibly happy with this mod!!

[@user-tp9ke9ey9s]

where did you get the reduced reach seat pad

[@bluesriderDF]

That seat bolster comes stock on the Low Rider. When I bought the bike it had been removed,so I got one on eBay. It's only designed for that specific seat.

[@CheeseShells]

I bought my Harley used and I removed this kit however I do not have the OE shaft piece that you needed to replace with this kit. Do you have any idea what that piece is called so I can see about trying to find an OEM one so my brake pedal will sit normally?

[@bluesriderDF]

Go to this site and click the OEM Parts Finder. Pick your year & bike, and see if you can find the part in the diagrams. It should have the part number and what it's called. partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp

[@grindfestoutdoors]

How tall are you?

[@bluesriderDF]

I'm 6'0" with 32" inseam

[@HaiPham-dw2kg]

Where can I buy this kit?

[@bluesriderDF]

It's a Harley part, the part number is in the description.

[@dilipselvam2688]

Hey bro ... Thanks for the video ..am gonna buy a 2012 Street bob and want to install a mid control..pls Lemme know what the cost of the spares or if you have an used one i can buy it ..am from India

[@bluesriderDF]

Sorry but I don't have any parts.

[@DennisD9799]

Where did you get this part? I need one ..

[@bluesriderDF]

Hey bud, Harley p/n is in the description

[@DennisD9799]

@@bluesriderDF Ok, Will check it out on computer, phone doesn't show me descriptions.

[@bluesriderDF]

@@DennisD9799 Harley part no: 50700005 "Reduced Reach Forward Control Conversion Kit"

[@monkusbee]

I love Okabashi’s! Looks like you’re in N East Pa.

[@bluesriderDF]

Yup, Pike County.

[@captmunson]

@@bluesriderDF liked the vid.. maybe see ya at baer sometime

[@bluesriderDF]

@@captmunson Thanks!

[@jacobelliott5351]

At .56 secs. What size are those bolts for the forward control mounting bracket. Both of mine for some reason made from a very cheap metal and sheared both heads off only. Weak point where the torx head was joined to threaded section

[@bluesriderDF]

I don't know what size they are, but if you look up the forward controls kit for your bike, it should have a part's list and you should be able to find the part number and order replacement. Don't ya just hate Torx?!?!

[@Jay-wq7mr]

I need to do this on my 2011. Where did you get the kit? And how much was it?

[@bluesriderDF]

The Harley p/n for mine was 50700005 so just confirm fitment for your bike. I got it at shop.newcastlehd.com, they show it for $160. This kit has made my bike a perfect fit.

[@asuntosbiblico-teologicos961]

Donde lo puedo comprar para my Dyna 2005. Cuanto es lo mas posible moverlo hacia atras

[@asuntosbiblico-teologicos961]

Hoy me llegaron mis controles reducidos. Mañana los instalo. Veremos

[@bluesriderDF]

Espero que ellos trabajen para ti!

[@adrianalvarez444]

Did you not do the otherside?

[@bluesriderDF]

Yes, I did both sides, I showed that at 13:50. There just wasn't much to see on the left side.

[@henrikflatas4723]

Did you buy the HD kit? How tall are you?

[@bluesriderDF]

Yup, HD kit. I'm 6'0" with 31" inseam. I have the bolster pad on the seat that the Low Rider comes with. This will the Reduced Reach Forward Controls is about perfect.

[@jamescampbell7823]

Thanks for the video I got to do something like this. Couple days ago I bought the worst Harley somebody like me could buy. the old Dyna Wide Glide 🙄. I'm 5'7 and that thing is too wide too tall and too long. But it was a hell of a deal, I'll ride it for a minute and get another super glide. But in the meantime I got to bring these pegs back I'm almost afraid to ride the damn thing and that's never happened to me. Has anybody done what my mechanic suggested and just drill more holes in the stock bracket??

[@bluesriderDF]

The stock Low Rider seat has an removable seat pad (it was removed), so when I added it back I was closer to the pegs, but still not enough. The kit in this video made it perfect. You might want to look for a seat that moves you forward.

[@jamescampbell7823]

@@bluesriderDF the problem is that when I scoot forward, which I have to do to shift or rear brake, I'm sitting on the gas tank a little. so I don't know if the seat would do it, unless the seat rode up on the tank a good bit more I'll try this kit first, then look for a solo seat option to augment.

[@sporsterini]

James I just bought a 2002 Dyna Wide Glide. I'm about your height. The controls are way to far out for me. I was thinking of going with foot boards. But this kit has caught my interest. I wish we could have seen a before and after picture. How far back does this kit actually set your controls back ?

[@bluesriderDF]

@@sporsterini "Forward Control Conversion Kit repositions the Original Equipment footpegs and foot controls up and back by over 1 inch." It might not sound like much but it made a huge difference. I went from always uncomfortable to perfect.

[@jamescampbell7823]

@@bluesriderDF yeah sorry I wasn't looking on here for a while I guess so I didn't see these responses. So what I did first was to put it back to factory because I found out that I had a plus 2 setup because the previous owner was like six five. So factory forward controls are still too far forward so yeah if I do anything I got to bring them back some. One thing I did right away was install mid pegs and that makes a huge difference cuz there's no way I'm going to ride with my feet up there all I do with the forward controls is shift and brake. And 99% of riding is neither one of those two

[@greenmarine5]

Forward controls need 2" spacers to help flare your legs out or you'll have sore crotch muscles. Make sure your kit comes with spacers or you'll hate them.

[@donniem6191]

What highway bar do you have

[@bluesriderDF]

They were on the bike when I bought it, I think they are Harley brand.

[@phillip-tx9565]

@@bluesriderDF I'm needing an engine guard that works with forward controls -- and every manufacturer says they don't make one. But obviously some one did at one time, since you have one. If anyone else has one and knows where they got it, please reply. Thanks.....

[@bluesriderDF]

@@phillip-tx9565 Did you check Harley's website?

[@Sharleyn2015]

bro your wind shield is very high might as well stick to a car man!!!

[@bluesriderDF]

That's just cold bro! 😁 That's the Harley Super Sport windshield. The top is a couple inches below my eyes where it should be, it's perfect.