The PERFECT Balance - LIAN LI A4-H2O Build - Gaming Like a GOD

[@llucoste]

One of the most aestatically pleasing builds i have ever seen. No RGB. Only perfection.

[@Joker69s]

It depends on how yoy look at it, for me perfection is full of RGB, not the rainbow puke, but a colour theme.

[@brandonchappell1535]

Geez bro, you never cease to amaze !! Watching others build in this, basically putting their knee on the powersupply to close the side, yet on yours i cant see a single wire!! Your definitely the Final Boss !!

[@t_dub]

Every single time I see another build from you I immediately engage "What can I sell to get that?" mode.

[@jasonriddell]

for me it "there ANY chance MINE would be 15% as nice as that build"

[@spieagentl]

I recently built a desktop using this case, and I have to say that the custom internal shroud piece that you added makes such a big difference on the final clean look of the build!

[@LauriHuu]

If only I could find that rad/pump combo or one that is slim enough to fit. Got the case for cheap and would 100% love to try and replicate this. Easily one of the cleanest sff builds I have ever seen.

[@davidle7864]

It's unbelievable how you're able to make rigid tubing look so clean in SFF! Most people would go soft tubing and call it a day

[@BuzzKora]

I thought it was soft tubing and was confused how he was able to make the bends so straight ahah. Well done man, another banger.

[@warwicka8407]

Well, because most of people probably think about how janky/annoying the maintenance is when going hard tube in small cases, hard tube does looks good tho

[@CWAnderson331]

Have to say you’re one of the best in the industry. Perfect 10 out of 10 build.

[@rizwan.an01]

Have to agree on that one. Different kinds of builds with different cases and orientations.

[@AdamHird]

Couldn`t agree more, very inspirational. Makes me want to get back into the industry after about 10 years of being away from him.

[@gorillaxrich]

One of the best??? "He is the absolute best", end quote...

[@GGFEvents]

@@gorillaxrich Thank you :)

[@gorillaxrich]

@@GGFEvents Your welcome sir...

[@robmasters3569]

I've been so looking forward to your next video as this is by far my favourite build / review channel on KZbin. Yet again you don't disappoint as you deliver another stunning build

[@GGFEvents]

Thank you

[@blackmennewstyle]

You are definitely hacked/gifted with way too much talent Stuart

[@jbgaud]

this is what I call the best build I ever seen. No need to say more.

[@limitedhangoutlive]

Every time I need inspiration for my new build which I put together every 2 years, I come here and you never disappoint. I went O11 XL this build but definitely using my previous components to build an SFX.

[@lemonshire1]

Dude, that is the cleanest and nicest PC build I have ever seen. Looks absolutely insane.

[@GGFEvents]

Thank you

[@TechnicaX]

This is the build. Yes found it. I need this yesterday

[@RobertOw83]

So your builds are always outstanding; but, this is downright perfection. GG.

[@GGFEvents]

Thank you

[@1stRanger]

Very sleek build. Excellent color scheme and overall choice of components matched together.

[@xx_raphaelo_xx7594]

The best Build i saw so far! Great work

[@_FD1]

Dude I’ve not seen such clean build in this case ever . You’re the best keep going my man

[@ArdyneusTheGod]

In my opinion, the mesh panels covering it up makes the built more stealthy. It gives me small and compact vibes.

[@whiskeytown3777]

Dude, that build is insane. Absolutely crazy.

[@whiskeytown3777]

Even at LANs back in the Pentium 4 days When I would go with my old man (I was 14/15yo) people use to call me a cheater. I call them casual gamers.

[@jerryreescano2934]

Very, very clean. I'll be doing one of these myself soon. Thanks!

[@ronniekregar3482]

WOW, absolutely gorgeous build!!

[@Just_Call_Me_Tim]

I’m literally finishing a build in this exact case. Started Saturday with a run to Microcenter to get parts for an upgrade and ended up with a whole system. 😓 Couple things I’ve learned: Lian-li Galahad AIO pump block doesn’t fit at all, and Silverstone 1000W SFX-L power supply also doesn’t because of the fan grill. The Corsair h100i does fit just fine. i5-12600k 32GB GDDR5 ASUS ROG B660i 1TB PCIe 4 NVME RTX 3080Ti Coolermaster 850W For those wondering. There’s room on the gpa side, at the bottom of the case to route and kind of bundle cables out of the way. Be careful which h100i aio you get, as the rub one I got has a separate controller module that you’ll have to find a home for. Mine is on the back side of the front panel, between it and the power supply.

[@carboncopy8]

GGF Events is the undefeatable champion of perfectionist PC builds and the greatest aesthetic talent on the Internet. Your talent is unmatched.

[@GGFEvents]

Thank you :)

[@badzilla7491]

I thought I built clean PCs and you make me feel like trash. Probably the best builder on KZbin. Clean builds and excellent quality videos. I like how you chose your components carefully since a single 240 radiator could not cool much more than what you have. Especially that 240 radiator/pump combo is not known for good cooling.

[@vie-on-whitte]

what radiator/pump is it?

[@lapkinms]

the most beautiful and perfect system unit on Lian li a4❤

[@abzaman77]

One of the Best and the finest for sure.. You are incredible.. I wish this channel would grow fast..

[@helloworld9811]

May I ask a question that always lingers in my mind? Do you sell these amazing builds after completion? If you do, is there an online store where people around the world could shop, or do you only sell them in a local retail store? I know sometimes the company sent you products for "review" or "marketing" purposes, some of them were sent for free, some of them are lease contracts. I would assume most of the hardware you receive was just test samples that were given away right? But if some of the parts were leased, do you just tear down the build after completion? I know the question might be sensitive, but maybe we could know just a little bit of info that is non-classified?

[@N7408-f7x]

I know some pc KZbinrs take it apart afterwards but unsure abt this one.

[@laks2804]

Thank u for this detailed video, just build my 2nd ITX PC with this after NR200P, the most challenging was installing the AIO, the rest all was quite manageable.

[@danielsong5008]

Can't wait for the followup video!

[@I5-20VT]

It this what peak efficiency for a SFX case looks like? I believe yes. Beautiful build 👌

[@floki2802]

7:52 "alt again ??" ye, no wonder. you're feeding him like crazy beautiful build btw :D

[@AniSepherd972]

all black, no rgb, sff build. Its perfect 👌

[@gamerscore88]

LOVE this build. So clean and minimal. I want to do a custom water loop eventually

[@bjorn2625]

Amazing looking build, but not enough heat can be dumped out of a 240 mm radiator taking waste heat from both CPU and GPU. Dan & Lian Li got it right in the design; air cooled GPU (typically 3 fans) and water cooled CPU (2 fans).

[@GGFEvents]

And how do you know that? It's a 5600x and 3070. Pretty low end components and both don't go above 60deg while gaming

[@luismiguelpereaguerrero636]

Incredible... Very very very sleek black build. Hats off to you.

[@GGFEvents]

Thank you

[@lapkinms]

The wiring is amazing

[@radiantav]

This is super cool. Love the color vibe and hiding plates that cleanup both sides.

[@gblongboarding]

Such an awesome build all of your videos are eye candy! Im looking into doing a similar loop but with a 3080 and a 12600 or 12700. In your review video could you give us a look at your tube routing behind the power supply. Also when I looked at the rad pump combo on Ali it had a copper finish, did you paint the rad?

[@patrickdulfo7792]

The aesthetics and power of this thing..

[@pedroduarte5052]

Your work is very good we are lucky to see it many thanks

[@xDJ_Cas]

Can I please ask you to update the description with the quantity of EK water cooling details and add: 1) fittings, 2) HDP tubes, 3) corner extenders which you connect tubes with the radiator at the top, 4) a clear water block where you put the water by screwing in the Radiator for DYI water? Please, please 😇

[@Falcon5ive]

Overwatch, man it brings back memories, good times years ago, now not so much

[@booyaaaaaaa]

Love the flex at the end haha

[@whitexeno]

A E S T H E T I C build, nice work. I really like the matte black hard tube.

[@z4k1_zaki65]

As always, love the outcome! 🙌🏼

[@coys4life450]

I love this build I have always dreamt of building an itx watercooled no rgb performance beast

[@fullmetaflak]

Incredibly clean looking setup, absolutely makes me think about getting into custom loops

[@Joker69s]

do it, I was afraid and it is not that hard, I nailed the custom loop on the first try, no spill and no problems

[@smartguy62]

​@@Joker69s just curious, how is it holding up after a year?

[@sleepy1171]

Love that sneaky Play of the Game at the end!!! I was hooked on Overwatch for the first 2 years when it released. I miss the Overtime clutches those were so intense hahha. Love the build bro that's so clean! Subscribed 👌🏻

[@Amariths1]

been waiting for this build

[@rodhester2166]

Every build you do is crazy good.. Best builder on the net in my opinion.

[@GGFEvents]

Thank you

[@beckmann930]

Super Clean! NICE!

[@1004onej]

Build and Hanzo play both amazing

[@FieryWings01]

Gorgeous as always Stuart good stuff ✌🏼👌🏼

[@prodeous]

That Rad?pump combo reminds me a lot of the EK-XLC Predator. Dam I wish they made them again, and like this one, without any blocks attached. Nice build as always

[@asphaltbinder]

Awesome build as always!

[@maikel3572]

Dang what a super clean build man. I think GPU manufacturers need to step away from air coolers and just integrate water.

[@ibdustin15]

Man I totally would of paid for the parts on this PC for you to build it. Literal perfection. This is my dream PC with a 13600k and a 3090.

[@paynespaulding3621]

If you are seriously interested I could definitely replicate this except for the custom aluminum backplating he makes.

[@ibdustin15]

@@paynespaulding3621 thanks. Going to tackle this myself with an AIO whenever the 7700x3d comes out. Going to use my 980 ti until the GPU market calms down. Will it work with the riser 4.0 cable? Half tempted to go NR200P so I can air cool, but not sure.

[@paynespaulding3621]

@@ibdustin15 are you asking if the 980 will work with the pci4 cable? It will.

[@ibdustin15]

@@paynespaulding3621 ok cool. Thanks!

[@frankbennett5763]

I absolutely love this build! What did you use as a separator? Makes it look so clean!

[@xx_raphaelo_xx7594]

Since a week I watched ypur video like 10 times, because it is freaking amazing!

[@muffinberg7960]

2:16 how do you make something like this?

[@musabbirhasan5764]

Great video man. I would like to see a comparison between this and the Evolv shift xt built.

[@danielsong5008]

Will there be a follow up video for this build? I'm very curious to see how it all panned out

[@bobbystefano]

one loop for both cpu and gpu? Any thermal test? Look amazing?

[@MrRyan0528]

Where can I purchase the mod that you displayed at 2:16?

[@Bxgsy]

Would I be able to cool an i7-12700k and a 3080 efficiently with the same cooling setup you have? Very nice and clean build!

[@markdavenportjr5129]

Excellent BUILD! : D

[@berrigan5121]

What is the resevoir looking thing you are using to fill the loop?

[@m0ntreeaL]

ohh boi thats by far my favorit build

[@hoanganhle3777]

Awesome build, as always.

[@jfmeister]

What are the temperatures under load for GPU and CPU? Would that setup work with an i7-13th Gen and a RTX4080 without issues?

[@PeteCotton]

Gorgeous build, and I love the small form factor stuff you're doing! I have to wonder if a single 240mm rad is enough to cool that CPU and GPU for more demanding workloads though.

[@GGFEvents]

Thank you. Hence the mid range hardware, temps are too bad. Actually the most demanding workloads are gaming as both CPU and GPU are used in the one loop. Synthetic tests will really just stress one or the other.

[@salsashreenee6887]

@@GGFEvents Could you post the temps? Would it really be bad if I wanted this setup with 12-700K + 3080TI/6900XT, would adding an ABP to the GPU make this configuration viable?

[@GGFEvents]

@@salsashreenee6887 no chance with that hardware. I'll do full coverage on temps in the follow up video. But so far CPU is around 65 in gaming and GPU is 55 to 65. Everything stock.

[@salsashreenee6887]

​@@GGFEvents Shame but if you are getting 55-65 with 3070 & 5600X which is really decent i think, I feel like a 12700k + 3080ti would hover 75-85 after undervolting while gaming don't you think? What do you predict when you mean no chance, like it would hover at 100 and throttle while gaming?

[@motoken]

@@salsashreenee6887 I am hovering around 87-90C on gaming load with 12900k and 3090 FTW3 in a A4H20 using a Corsair AIO

[@oliverzink6370]

Hi. Where did you get this divider panel from or did you make it yourself? Have a nice day!

[@cr0ml33ch8]

perfect clean build

[@-AnakinSkywalker]

where do you get your metal plates from? I’ve seen you use a few on your builds. Seen at 2:17 And do you have the dimensions for it?

[@meltahir]

Such a beautiful build. What would you do differently now, a year later? Also, would you recommend this (maybe with a 3090ti) for C4D and Redshift?

[@MrHack72]

It's just precious my dream one day of setup

[@thebackstab8730]

hey , i cant find the radiator pump/combo . can i have the brand name pls? thx ,epic build i hope i can replicate this master piece.

[@SPBNicDaniel]

Hi ! can you give link to that filling bottle. it's very nice

[@wil-yy3cq]

This build is awesome looking to do something similar would love to know what radiator/pump combo you're using to have a reference

[@evenhart19]

great build was thinking of doing the same - it's so clean!! not sure it will make me game like a god though. what is the 240 Radiator\Pump Combo? great to see Aussie content!

[@ADViators]

Firstly, holy hell this isn't a computer it's art. Second, this isn't a tutorial it's art. Third, used to build home computers. Did some 6 machines but like 12 years ago and have had laptops ever since. I'm starting a home build gaming rig now for flight training. Found this video due to similarities in the case and parts. Do you have any instructional anywhere for the builds? The liquid cooling is new to me, and the plumbing a tad mysterious. No idea how to plan it out, get the drainage right...

[@betaunknown]

The rad pump combo is no longer available. Do you have the dimensions of the rad you used?

[@cesarcarpa7887]

That's gorgeous men!

[@EmberIsABrat]

How many fitting did you have to use? Also I'm hearing that the radiator pump combo is apparently hard to get air out of. Is that true?

[@lorenzocoxgandia7335]

Perfection in one video 😍😍

[@CHADCHOPS]

So clean love it

[@Vici0us369]

Very Clean!

[@ignoranceisbl1ss]

VERY clean build.

[@muhammadrosli4999]

The build was perfect

[@gan_luo1909]

What 240 Radiator\Pump Combo did you use? The link died.

[@MarigoldAW]

I love small form factor!

[@inthenightwish]

Is so small... But powerful. Great build and great video. Greetings from Venezuela, Stuart.

[@liyistv]

Lian Li listed that Dan A4 H2O is compatible with 240x55 radiator + fan. The link of the parts is broken, I guess you may use Granzon GZMN which is is 62mm thick.

[@pau_gz6899]

The 240m pump/radiator combo is no longer available in aliexpress. Any alternatives? Thanks.

[@aflorin3039]

Can u give us the size of that interior shroud u made in order to use those passthrough fittings? My a4h2o is on it's way to me and i wanna make a similar shroud too.

[@misteryhit5408]

its amaizing build what i can see

[@Joh_Lam]

I got one weird question: Is there a case out there that is completely soundproof? I've just been wondering for a while, as my problem is that with external radiators I don't really need much air flow in my case and the only noise coming from my pc is the coil whine of the watercooled GPU. So I was looking for a case that isolates the coil whine as much as possible. Anythink alike exists maybe?

[@weilianlow]

Hey man great build! Would it be possible to let us have the .step file for your 3D printed mods? I assume they are 3D printed

[@massam9343]

i have this case and want to do a custom watercooling, is it fine not to have a water reservoir like in the Optimum Tech channel??? What is the downside of not having the EKflt80 reservoir??

[@MrTacoThon1]

What is the plate at 2:19 ?