Give Your Architectural Project a Reality Boost with Enscape

[@kennethkinomis3875]

I like how you take your time explaining every function of enscape and sketchup.No fancy disturbing music.more tutorials.thank you.😁

[@JosephKim]

Thank you!

[@FranCarreira]

I’ve never seen such a good tutorial, loads of useful information without distractions and in a very short video. Congratulations.

[@JosephKim]

Thank you!

[@thomaspippin5883]

You're making great videos Joseph! Thank you for being so kind with sharing your craft knowledge! I saw you present at Basecamp 2018. Great stuff!

[@JosephKim]

Thank you so much! :) you made my day

[@masood6086]

thanks man that was so helpful more power for u

[@JosephKim]

Glad it helped

[@1carlos83]

Great Videos as always Joseph. Why do you prefer to model in Sketchup over Revit? To me, since Enscape “syncs” with Revit it makes sense to stick to Revit, why do you model in Sketchup? Higher modeling techniques? Thank you as always!

[@JosephKim]

It just depends on the task and project :) tweaking geometry for furnitures and changing material is a bit easier. But I prefer drawing methods of Revit.

[@junmora]

Hi Joseph, Thanks for sharing this video. I have a question regarding the second plugin Clothworks. When i render the cloth on enscape, the animated cloth is not rendered until i stop the play button in skp. So im not able to capture the cloth animation in Enscape. Do you have any suggestions?

[@JosephKim]

Maybe it is now different since they have versioned up since. I am not able to verify this at this time.

[@JosephKim]

Maybe it is now different since they have versioned up since. I am not able to verify this at this time.

[@innovationdesigner2212]

Watch your all Enscape video just awesome, thank you for sharing your knowledge with Us. If you don't mind, Need your help but don't know how i contact you or explain you about Problem in my Enscape

[@JosephKim]

There are few ways that you can reach me. Find the about page of the channel, you can talk to me via social media

[@sheikhanamzaheer480]

Hello I also want some information about the escape..

[@Jsallette99]

Fantastic.... love this video..

[@JosephKim]

Thank you!

[@octavalent]

Great videos Joseph. I'm new to Enscape having migrated from Vray and these are helping a lot. I am finding my Quest 2 setup very buggy and jittery in Enscape via the proper Link cable even though I get 2.6Gbps bandwidth and have an AMD Ryzen 9 3900 12 core processor and 16g ram. I am thinking it might be the Quadro P4000 card that is the issue but cannot find a solution. Any clues? But thanks anyway if no idea. Great tips.

[@JosephKim]

Yeah, I don't think P4000 is cut out for VR. It does have large VRAM, but for Enscape, you want faster performance too.

[@tahagenc7536]

Thank you Bro. Can i use yours vedio ?

[@JosephKim]

Video where?

[@aaadikhan3857]

i have installed sketchup 2020. can you tell me which enscape version should i install. and kinldy give me link to download aswell.

[@JosephKim]

The latest :)

[@peterblickle3d88]

Great Video, Thanks! Is it possible to place the Sketchup-Window on one Monitor and the Enscape-Window on the other Monitor (if used a 2-Monitor-Setup)?

[@JosephKim]

Yes, you certainly can! I actually do that all the time.

[@jimmybonifacio6734]

Thanks so much for posting! Your tutorials Rocks!

[@JosephKim]

And thank YOU for watching :)

[@ch33kster]

Hi Joseph, really loving all your video content for Sketchup! Is there a way I can alter the distance of the street view imported into my model. Its too close and my model sits in the middle of road. Cheers

[@JosephKim]

Thanks for whatching my content! Unfortunately, no. I have also struggled with fixing the distance.

[@vidanost1710]

Hola Joseph, any tips for a newbie?

[@JosephKim]

Do a case study of your room to get yourself familiar with the process!

[@vidanost1710]

@@JosephKim Thanks Joseph. I've actually done some work on enscape before. Would you mind checking it out?

[@JosephKim]

@@vidanost1710 no, not at all. Would it be okay to feature your work on the channel?

[@vidanost1710]

@@JosephKim if it's good enough for you, sure. I'll post a link.

[@vidanost1710]

@@JosephKim m.kzbin.info/www/bejne/iHzQfIiXj7Ctnac

[@MissAwa515]

Hi Joseph! I just installed SketchUp 2020 and it seems like Enscape 2.7.1 is not showing up in that version... Do you have any idea about this problem? Thank you!!

[@JosephKim]

Try to re-download the Enscape version. It has been updated to work on 2020

[@MissAwa515]

@@JosephKim I downloaded the 2.7.1 through the link they included in the license email. I could not find anywhere else on their website to download a newer version...Where do you download the newest version of Enscape?

[@JosephKim]

@@MissAwa515 enscape3d.com/download/

[@MissAwa515]

@@JosephKim Thank you!! I will try this one!

[@PalindromeDesign]

Great tutorial. Subscribed! Still trying to understand the albedo and bump maps application.

[@JosephKim]

Thanks for the sub! Can you explain me what you are having trouble with exactly? I might be able to help :)

[@PalindromeDesign]

Thanks. When selecting the Albedo option it just opens a Browser. What content am I saving to a folder and what is the best place to find them for Sketchup? Like tile maps, burnished metal...reflective glass textures. I'm a lighting designer by trade. I was pretty good with the basics of Lightscape 20 years ago but fell out of it when Autodesk buried Lightscape in VIZ and made it a rendering specialty.

[@PalindromeDesign]

BTW, I love the Enscape "Outlines" tool. A subtle amount bridges that gap between a conceptual image and "too literal" photorealism.

[@JosephKim]

Check this article by Dan, enscape3d.com/best-practices-albedo-in-architectural-design/ In short, I believe albedo is trying to pull just an image (jpg) as material base. And I cannot agree more with the outline. Is one of the reason I love Enscape so much.

[@PalindromeDesign]

Thanks! I'll check it out. It's a phenomenal design tool. I layer up my lighting options, turn the layers on or off for different combinations, dim the sources down up or down, instant return. I have noticed I am not getting a soft light as if through a frosted glass source. They seem to be uniformly literal sharp cutoffs. Any suggestions to make the light fade more realistically, or must I use specific IES files?

[@jorgebarcellona8339]

thanks, I'll put it to practice, one more query, but it bothers you, enscape accepts sli? to have 2 graphics card working together ??

[@JosephKim]

No, it doesn't benefit from SLI unfortunately.

[@jorgebarcellona8339]

Thanks for your quick response, excellent channel, I follow you from Argentina! regards!!

[@JosephKim]

Thank you Jorge!

[@mbilalgoker]

Another excellent work. I have been using Enscape for over a year now. The problem that I had with proxies was,First I was importing the object, then copy and paste in place it into another SketchUp file and Proxy it into the original file. But "Saving it as an external reference for Enscape" will save ton of time and energy :) I also didn't know that enscape uses geolocation for precise shadowing. Thanks for this video. Looks like I have ton of quality video to watch :D

[@JosephKim]

Thank you so much for the comment again! Do I call you MBilal?

[@mbilalgoker]

@@JosephKim Bilal is good :) And you don't have to reply each and every one of my comments:) If you do so, looks like you will reply lots of comments today :)

[@JosephKim]

@@mbilalgoker I certainly don't mind when time allows. :) And is my way of showing gratitude! Thanks Bilal.

[@jorgebarcellona8339]

Hi, your channel is very nice, I can ask you a question, make a simple animation to understand the subject of the camera, because I get it very quickly, I do not know how to add time, so I'll slow down, would you help me ??

[@JosephKim]

Thank you, Jorge. You can change the speed of the camera movement by changing 'timestamp' in the keyframe menu.

[@jorgebarcellona8339]

thanks, I'm going to put it to practice,

[@mustafizrahman252]

Great video. Thanks Joseph Kim

[@JosephKim]

Thank you!

[@ryoichiwatanabe648]

Super useful content!! keep it up!!

[@JosephKim]

Thank you!

[@francescodilecce7189]

Is it possible doing the same in Lumion? Or exporting the enscape file you created (360° img included) in Lumion to complete the job with a more realistic result?

[@JosephKim]

The changes that you make inside Enscape material library or exe, 360 panorama will not translate to Lumion. Just what is on SketchUp it will understand

[@pedropaez1853]

Thanks for the tip of Openfootage.net !!

[@JosephKim]

My pleasure. Did that workout for you?

[@jimmybonifacio6734]

(Enscape newbie here) Would you say Enscape is easier(use) and better(quality) than Vray & Lumion?

[@JosephKim]

It all depends on how you use it. :)

[@bzz3624]

Do you use other software like VRay , Lumion ... or just use Enscape?

[@JosephKim]

I use all three that you just mentioned. :)

[@JorgeAguilarCR506]

Excelente Joseph Kim. Tu consejo de como bajar las imagenes 360 de google street view es genial!!!. Estoy conectado a tu canal y usando el trial de Enscape3D en estos días, este video es de gran ayuda. Muchas Gracias.

[@JosephKim]

(understood via google translate) Awesome. Thank you so much for watching!

[@Nymike412]

another great and informative video! keep it up :)

[@JosephKim]

Nymike412 Thank you!

[@biolagoscascatas334]

Hello, I've learned a lot with this tutorial and I even managed to do some work with 360 ° images to serve as a background for my projects. However, most of the time I can not frame the perspective on the image because it moves up and down and invariably the design never reaches the correct height of the floor. Is there any way to facilitate this work without having to do post production in a program like Gimp or Photoshop? Thanks.

[@JosephKim]

Perhaps try varying the camera position and use rotation feature to align?

[@richardpimentel1979]

there no chance to move the object, like the people? i want to animate..

[@JosephKim]

Unfortunately, No.

[@snehasishmahata8056]

Can I import projects from revit into enscape

[@JosephKim]

You don't have to import. You just open Enscape from Revit, and it Judt works :)

[@babinmb3695]

Sir I have doubt When I open enscape for sketchup It shows a message " Your graphics card is not supported.enscape is using your GPU from Intel" What to do ???? I also support lumion 6.5 There is no issue with graphic card

[@JosephKim]

I suppose you should contact Enscape's own support team as they would be much better than me for addressing something like this. But... What Gpu do you have?

[@jonitan76]

see this link requirement.. you need a gtx 1660 or higher enscape3d.com/knowledgebase/system-requirements/

[@mitchliao2581]

Your video is very helpful Also you got a new subscriber :D

[@JosephKim]

Thanks Mitch!

[@BobSmith-cx4og]

Entourage is a plural word - don't say "entourages", it's just entourage.

[@JosephKim]

Thanks for correcting me. I understand, and I will try!

[@JosephKim]

Actually, a short search is telling me that plural of Entourage is actually Enturages. I suppose it depends where you speak?