✨ GMC POWER SEAT WON’T LIFT REPAIR- -DIY ✨

[@thatguysota9313]

Awesome man thanks for the video. great camera work and details on the whole process. 👍

[@ScottTheFixItGuyChannel]

You’re very welcome 😊

[@bretford4032]

This just helped me so much! The rear of my lower cushion was stuck all the way up. I was having to duck down to see out of the rear view mirror. Turns out the yoke is seized on the all tread rod. But I was able to disconnect it with the 11/32 socket and push it down manually! I’ll figure out the fix later. I’m stoked right now!!

[@ScottTheFixItGuyChannel]

Awesome Job Bret😊😊😊

[@skipfyfe7794]

Thank you for the video. It helped me a lot. After hours of trying to figure out what broke on the motor, it turned out to be something very simple. There is a brass bushing that aligns the axil of the electric winding within this motor. that pops out of its housing. I super glued it back in place, and the motor now works because the worm gear is back in alignment when the brass bushing is back in place. You have to glue the bushing because it pops out very easy. Took me hours to figure this out. And new motors are not available. There are 4 tabs that hold the gear's end piece of the motor. Bend them back and expose that end of the motor. If you by mistake pull the axil away from the connector end of the motor, it will be time-consuming to get it back in place due to the brushes need to be pulled back. I used a dental tool to get the brushes back in place. GM wants 600 bucks for the base and 100 for shipping. What a rip-off.

[@ScottTheFixItGuyChannel]

Thanks so much👍

[@ScottTheFixItGuyChannel]

Thanks So Much Skip, I Hope That You Can Become A Member of Our Channel😊👍 Here’s a Membership Link: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin

[@leeroberson1136]

Without even getting under mine yet, I am betting this is my issue. Always check the comments. There's gold in them thar hills.

[@yolanda1979]

I have a Buick LaCrosse do you repair the car seats? Mines are moving like a swivel chair now and it’s hard to drive cause my seats so far back from the wheel. Do you know who can repair mines I live in Yukon as well

[@Nazz1964]

Awesome video thank you that's the exact problem I have. I appreciate you taking the time to help ppl like me. My motor tries but seems stuck. I have a 2012 escalade

[@troywhite76]

I guess I shouldn't be surprised that GM didn't make these motors easily replaceable.

[@santiagodavila1426]

Great video.. For my 2014 yukon Driver seat forward and backward not moving but I can heard the motor it just doesn’t move. Passenger seat the recliner stuck all the way down. And I can hear the motor too.. Any tips.?

[@moddingking3342]

I have the exact same problem, did you figure out how to get the passenger seat back up ?

[@santiagodavila1426]

@@moddingking3342 hello.. one thing my controls were kinda sticky and stuck, took them off completely.. wash them and WD-40..

[@martyhart135]

Scott I replaced seat switch on my 04 GMC YUKON DENALI XL drivers side. Heat works, seat goes up and down, but it won’t recline when I use the switch I hear it click in seat control module but motor does nothing??? Other problem when I go to move seat forward it goes back an vice versa?? Any advice on these 2 problems. I have seat all way out but I’m clueless about wiring …..

[@martyhart135]

And where can I get new motors

[@ScottTheFixItGuyChannel]

Hi Marty, I bought a seat frame used from eBay and removed those motors to fix mine. I hope that helps👍

[@bw-mi9xp]

im working on an 07 yukon and you mentioned there being a brass gear for 07's and up. do you have a link to this brass gear?

[@ScottTheFixItGuyChannel]

Hi Brandon, Can you email me at [e-mail] ? I have one that I can sell you for 30.00

[@miko8794]

@@ScottTheFixItGuyChannel I assume he bought your spare. Can you please post the link for the gear? I need one for a post-2007 as well

[@turt216]

I have the same problem

[@Spazin0ut]

Where can u find the pre 2006 ones?

[@georgesica8532]

GM truck is this video made from is a 2005 GMT800. 2007-2013 are GMT900 that the seat slide track is different. Same problem on both platforms but the motor assemblies are set up different.

[@ebottop6785]

i have a 04 tahoe and there is a box in the center, my seat will not move forward or backwards and the buttons with the cross won't move either. i hear the motors move but will not budge, any suggestions?

[@briankilby8320]

I cant seem to find the shims, can you please provide a direct link? Thank you for a great how too.

[@streaxu]

The middle cushion on my backrest doesnt work anymore, i hear a click or some sort but nothing happens. The side ones work tho. any tips?

[@howtostartabusiness1105]

Where do I find this repair manufactory

[@michaelbox7285]

You dont need a special tool, a 15mm on the front and 7/16 on the back will get those off.

[@ScottTheFixItGuyChannel]

Yep, works just as good👍

[@vicO1323]

I wonder how much GM saved by using a plastic gear?

[@ScottTheFixItGuyChannel]

Good question 😂😂