Thank for the info! Manual swapping my 94 K1500 and used this exact method! Clutch pedal is now totally secure, I didnt even need washers behind it.
@corbinbruzzese7492 ай бұрын
What size hole bit did you use for the master cylinder
@JustinPalardy-o3i2 ай бұрын
@@corbinbruzzese749 If I recall correctly, I believe I used a 23/64 bit.
@CollinZ71 Жыл бұрын
This was a great visual, thank you!
@isaiahbarrett5452 Жыл бұрын
Waiting for the finished product 👍🏽
@nightmar40569 сағат бұрын
How can I adjust how hard to press on the clutch or how deep it has to go
@xCONKEYx Жыл бұрын
Very helpful. Great video buddy
@ricardopadron24111 ай бұрын
1988-94 doesn't have the bracket welded in the dash but 95+ does because it's literally the round dash like your 96 parts truck, but 88-95 use the same clutch bracket with the 2 bolts holding master cylinder while 96-98+ have the twist lock master cylinder. Good video tho!
@georgeyasurek1861 Жыл бұрын
That helped me visualize what I need to do. Will your original driveshafts work or are they a different length too.
@CollinZ71 Жыл бұрын
Mine worked. Manual trans was about 3” shorter. But the overall t case/transmission length was within a half inch.
@corbinbruzzese7492 ай бұрын
@@CollinZ71 hey man what clutch pedal set up did you use.
@CollinZ712 ай бұрын
@@corbinbruzzese749 clutch pedal and bracket was out of an 89, I did not use the bracket above the dash, I took off the wiper cowl, drilled holes and bolted the bracket in that way with a series of washers.
@asksteevies4941 Жыл бұрын
Thank you for the video
@corbinbruzzese7492 ай бұрын
What size bolt did you use?
@johnmoreno7564 Жыл бұрын
I have a 90 Silverado 1500 I’m converting from auto to 4 speed. I will be using a hydraulic system. What clutch pedal out of what year truck do I need to buy? Another video shows a Wildwood clutch pedal and slave cylinder but the Wildwood clutch pedal appears to be shorter then the brake pedal.
@crf10010 ай бұрын
I see on eBay you can get a used oem clutch pedal and bracket for around $200. The oem style has been working very good in my truck so far.
@aidanbain909810 ай бұрын
Is it possible to convert a ‘88-‘94 clutch pedal bracket to accept that ‘96+ twist lock master cylinder?
@crf10010 ай бұрын
It might be best to swap the bracket out for the newer style I see the brackets on eBay for around $200.