1.9TDI DPF regeneration w/o service (as regeneration with out VCDS-VAG)

VW Golf 5 1.9TDI BLS DPF regeneration
carbon mass calculated

[@nicolaemargineanu4258]

Thanks bro..my car have only 64.. Still working regeneration passive..

[@vladpop88]

Same ash value for me, 68 at 280k km. Changed the value to 58 and I had more regeneration and limp mode from no ware. Changed the value back to 68 and high temperature cleaning will follow at a specialized company.

[@vladpop88]

@Mark S nice answer dr Obvious, as update, ived changed the dpf. Every dpf has limited oil ash quantity, you can drive it as you want, same shit!

[@vladpop88]

@Mark S wokring correctly mostly in city? I dont think so. Clearly was a bad choise from my side.

[@Automat1kkk]

Grüß Di :) spannende Erklärung! Schön... :) Hast du schon mal evtl das Miracle Hydrogen Rich Water von so einem Aquacentrum Gerät schon mal kennengelernt? Dieses Wasser ist richtig phänomenal! ☘ außerdem Wasserstoff schützt alle Organe

Rather than piss about with this just take you car for spin engine temp must be above 70 and between 2000-3000 rpm speed above 55km/phr and drive for at least 20 mins. Job done.

[@Thelemorf]

On my 2.0tdi i drove for 1h with those requirements fullfilled, didnt do shit..

[@fabio8800gt]

Hello. I Have an Audi A3 BMM engine.... I was very WTF when i saw Failed Regenerations and Sucessfull Regenerations 0..... as i can see on your video it is the same...

[@darrenturner9406]

My original value was ( 0 ) after changing values to see how it would alter results .ie-carbon mass. /filter load coefficient.I reset to original value (0 ).However the readings for carbon mass & filter load coefficient had changed..why has this happened?

[@kevin.afton_]

For me 068 not showing anything. Golf 5 TDI

[@5laywash272]

i dont understand what you have done ? How did you know the carbon mass reduced to 11 ?

[@golfwagen4173]

I don't remember exactly. the original was 60g, I recoded it to 99 and then I recoded it to 11. and finally, outside of the video, I encoded it to 60g

[@5laywash272]

@@golfwagen4173 but how you knew the dpf cleaned

[@digga5971]

Hello, can you give me the Code for regeneration. Thank´s

[@aysmen89]

If i want to have carbon mass 52 and i put 5200 and press TEST the carbon mass become 80. If i put 52 value is 52.how it s corect?

[@maciejprzybyszewski3077]

I input 30, pressed test, then save and now it’s reading 30. Btw why do you change the value ?

[@miguelmogrovejo8869]

Hola tal ve tu me puedes ayudar no se suben ni se bajan los elevaba no me funciona de lo interior luz de salon radior retrovisores ni las compuerta de atrás no me funciona los mandos a distancia del skoda octavia es igual q el volkswagen tdi 1.9

[@valiciolan7315]

Do i need a VCDS program to do this regeneration? Or i can make it in a drive around for 20 30 min?

[@nicolaemargineanu4258]

Yiu dont know when starting eegeneration without VCDS

[@balkan1122]

Hi can i do and 2.0 tdi like you?

[@hifihighend]

Tnk

[@ahmedboumaalif5250]

thanks

[@heniekklop5965]

measuring blocks 08 group 70 filter regeneration status 000000000 - not active