Easy Way to Hand Cut & Design A Name Necklace

[@laneyb8911]

I have no plans to make this. Just wanted to see how it was done lol thank you!

[@GomeowCreations]

No problem and thanks for taking the time to watch it. You might like this video as well kzbin.info/www/bejne/rIuUlaauZtCUhNU it was made just to be entertaining 😁👍and it a only 6mins long

[@Jessi0312]

Haha same!

[@lozimaefeller5987]

Thank i sell this name necklace using stainless for 3 yrs. Now i sold thousands of it for only 270-350 it helps me a lot specially my finances.. Thanks for sharing..

[@lozimaefeller5987]

Philippines😊

[@kirstinefuentes7123]

@@lozimaefeller5987 do you have shopee po?

[@jahnavireddy823]

@@lozimaefeller5987 i want to start this bussiness can you help me? I'm from india

[@maheshpm9863]

How u made it by manually or by laser

[@mzblacbabi8928]

​@@arwaa_mahendii❤❤❤❤❤❤

[@GomeowCreations]

Metal: Brass Sheet - amzn.to/2Wd847E Copper Sheet - amzn.to/3kKdWPg Sawing Tools: Nano Saw Blades - bit.ly/NANOSawBlades Cut Lube - bit.ly/PepeLubeLubricant 5in German Style Saw Frame - amzn.to/3uf3v9p 4.25in GreenLion Saw Frame - amzn.to/3EU9YeR 5in Haymaker SawFramebit.ly/HaymakerSawFrame 5in Knew Concepts Saw Frame - amzn.to/2XUwxQf Wood Only Bench Pin - amzn.to/2Y6k4su Bench Pin with Anvil - amzn.to/3obXRnE Bench Anvil Basic Combo Kit - amzn.to/2Y1Fgjw Files: Cheap File Set - amzn.to/3zIxurI Very Nice Half Round File - amzn.to/3m4xFIQ Needle File Set - amzn.to/3ETCoFZ Sand Paper & Rotary bits: Wet Dry Waterproof Sand Paper 120 to 5000 Grit - amzn.to/3lYKbK1 Rotary Bristle Disc Kit 80 120 220 400 600 1000 Grit - amzn.to/3kGsEH5 Silicone Rubber Polishing Wheels - amzn.to/2ZtvyGR Diamond Burr Bits - amzn.to/3kEyPvb Polishing Discs & Compound: Yellow Polishing Buffing Wheel Buffs - amzn.to/3AJoX92 Fabulustre Polishing Compound - amzn.to/3ufdM5t Silicone Finger Protectors - amzn.to/3EVihXV Wool Felt Polishing Wheel - amzn.to/3ET5yFg Polishing Machine - bit.ly/SingleSpindlePolishingMachine Rolling Mills Pepetools - bit.ly/pepetools130 Amazon Pepetools - amzn.to/30SC6eY Amazon Economy: - amzn.to/37p8ubv If you are looking for some quality CA glue check out the stuff made by StarBond. Use code "GomeowCrations15" at checkout to save 15% on your order and free shipping. bit.ly/StarBond The first 1000 people to use this link will get 2 free months of Skillshare Premium Membership: bit.ly/GomeowCreationsSkillShare This video was sponsored by Skillshare If you want to check out InkScape, here is a link to it and it's 100% free : bit.ly/GetInkscape If you would rather check out Illustrator here is a link to a 7 day free trial : bit.ly/IllustratorFree ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date: GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes ________________________________________________ My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ #necklacemaking #rollingmill #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy

[@stormiesozzoni1074]

Love this idea. My name is Stormie . Your very talented . I love how you give alot of detail on how to make an item and the tips you give to help those watching. Thank you.

[@dianajohnson9810]

I'm so happy I found your KZbin channel! You're very talented, and an excellent instructor because you're clear and your use of the camera is excellent! It's so helpful to find a good communicator with obvious talent!!

[@GomeowCreations]

Well thank you very much 😁👍

[@sherwinnero8111]

Great job, I always wanted to see this done on a higher level, the technics you use ,i can now apply, each one teach one thanks for this video

[@GomeowCreations]

Thanks and yeah it does take time to get the sawing skills to do this with out bending it or having to clean up a lot. 😅👍

[@pdelmercado]

You make it look so easy. I've used a jewelers saw before, and it's very tricky. You did a beautiful job. Thanks for the tutorial.

[@GomeowCreations]

Well thank you and I do have a lot of time using a saw 😅

[@sweetjcazalee1210]

Im a big fan if your learnings KZbin . Just shared to my page too. Thank you for doing this. I made my daughter's name Amirah 2 years ago. It was too thin the metal i used. So i had to saw another piece n soldered the 2 pieces together lol. So much work but it was a beautiful piece i made for her. I wished i saw your video then lol.

[@AimeQueenLeo]

I am watching at 2.8k views. Is that close enough to win? This video brought me back to jewlery and metals class in middle school. I wish I saw this video back then because in the 90' s Nameplates were a must have.

[@GomeowCreations]

Hey, I have already pick and sent out this to someone. I think a make this video about a year ago now and it's at 2.8k likes but over 100k views right now 😅👍

[@brianneciera7720]

can you make a list of all the supplies you used?

[@ashutoshseth2473]

Yes please

[@cynthiajacobsen7781]

The Teaching skills you have have made my work easier. You explain every step and you vocabulary is great. I have become more creative Thank you

[@sashaspinner4888]

This is a great, intricate sawing video. Thanks for all the pointers.

[@GomeowCreations]

Thanks and I'm working on another sawing video as I type this 😁👍

[@m-jane2881]

Ive always wondered how the ebay sellers handmaded those custom necklaces and now I know! Thank you for this very comprehensive and professionally made video! 😊 I was wondering if you were yourself selling jewelries or this is simply a hobby of yours?? Thanks a bunch hihi :)

[@Tilawat23]

I’m taking jewelry class in high school and this video helped a lot thank you

[@yourbreathisnotpretty2806]

His tone of explaining is so sweet idk lmao 🥺

[@GomeowCreations]

Lol thanks 😊

[@Unapologetically.K]

I’ve been waiting on someone to make a video like this . Thank you !!!

[@dadk5470]

your channel truly deserves millions of subscribers. You are very talented and very gracious in showing us "mortals" how to do thisand many other projects you have posted. Thank you very much for sharing. I am a new subscriber and I love all of your fantastic videos. Best of wishes to you for prosperity and happiness.

[@GomeowCreations]

Hey! Well thank you very much 😊 if you ever have questions or suggestions feel free to let me know. As if right now I read all of my comments on every video so I can keep in contact will people and help out. 😁👍

[@dadk5470]

GomeowCreations You are so kind! I have been binge watching your videos :). I am hooked! You also have a very pleasant voice. I do have a question :) I will post the question on another video I watched because it is pertinent to that one. Hopefully you will see my comment 😊

[@corriegallagher5241]

Thank you...all your info you share has helped me so much in South africa.

[@GomeowCreations]

No problem 😊👍 I'm happy to help.

[@yankiijujufrl]

Awesome work man, I have a job now with 3 names to do and I'm thankful for this advice good sir🙏✌️

[@jwon5614]

I absolutely love your videos! I’ve been watching them from the beginning and have learned sooo much🤗💕🌸

[@ASTD_OFFICIALYT]

Hi Randy Can you please write down the list of the equipment that you are using

[@Jennifer_Tabick]

Wow thank you. I just got a commission request for a name necklace and this will work for me…. Thank you. :)

[@GomeowCreations]

No problem and happy to help

[@misha-vw6fi]

very helpful. looking forward to making billions.

[@beevoice9795]

I love your work, description, kind voice, thank you so much, that was very educational, you fed my curiosity thank you so much

[@eclipse_eternal8178]

Thanks for making this, I've always wanted to see how these types of necklaces are made so this is nice :)

[@ashleymartinez6830]

Wow I never ever would have thought that you could just saw it like that! Thank you!!

[@sallymcmurray949]

Nice job!

[@GomeowCreations]

Thanks!

[@GenciMUATv]

where can i get these tools and are they expensive?

[@GomeowCreations]

Look in the description I just added a list of tools with cheaper and more expansive items 😁👍

[@EmmaGrace033]

Amazing Job! I Started Watching This To Actually Do It Myself. But Than I Realized That I'm Not An Expert Yet 😂 It Ended Up Being An Entertainment Video

[@GomeowCreations]

Thanks and yeah I do make sawing look a too easy in my videos 😅

[@lou196t]

Thanks for that trick for the "i". Great video. I do appreciate all of your videos.

[@wendyannh]

Great video, Randy - and boy, do you have some mad sawing skills! This is so far beyond my abilities. I think I would focus more on learning how to cut these things out of metal clay with a Cricut!

[@arriesm4695]

I think I understood the video for the most part but can you make a video of how you clean it up? Like how you clean the edges and make it shiny? I got a bit lost there.

[@PADALINAMAR]

Excellent video. You are an excellent person. Thank you for sharing YOUR knowledge. Muchas gracias estimado AMIGO.

[@ceesteven]

Nice job. This was a fun watch. Very clear descriptions. Thanks so much. Stay well. May God Bless

[@GomeowCreations]

😊

[@MakeupMobster]

You are my hero for Making this video

[@GomeowCreations]

Hero might be a little to strong of a word but thank you 😁👍

[@MakeupMobster]

GomeowCreations I don’t know if you remember me but I wrote to you when you first started your channel. So happy to see your growth. I would love to donate. Can you tell me what gauge metal you used?

[@MakeupMobster]

Omg nevermind. I see the thickness.

[@MakeupMobster]

Maybe you can explain the hardness of the Metal, say if I used a sterling silver.

[@GomeowCreations]

Hey, so I will be 100% honest but I don't remember 😅 I think mostly because I have now had thousands of comments so things get a little fuzzy, sorry about that. I'm happy to hear that you have been hear from the start. If you would like to donate you can and I have options: www.paypal.com/paypalme/gomeowcreations www.patreon.com/GomeowCreations www.subscribestar.com/gomeowcreations This one isn't taking any fees right now 👍

[@meginmurphy9685]

So neat! Thank you for sharing!

[@samfinejewelry589]

tunning! I always wondered how this worked. Thank you!

[@iwk-world]

Actually, you can also do this with Microsoft programs, Photoshop or any other writing program. The little rings can be adjusted later on, while making it.

[@GomeowCreations]

Well yeah, this is just the program that I use to do it and design all of my work. 😊

[@TheLeah2344]

I make bracelets but I wanted to start making necklaces. I’m going to start using single letters first like you suggested.

[@agklikethiz]

Thanks you for everything ❤

[@NewLife-qj9mx]

Great video Randy, thank you 👍

[@marisatellesrodrigues1532]

Great job

[@sady3978]

Very interesting video!!! Thank you so much!

[@carats1976]

Thank you so much for this video!!!! I am currently in Jeweler school (online) and I'm making a monogram pendant. This video was way more instructional & informative than my lessons instructions using jusat about the same material. I will definately be using the print out . Wayyy easier than scrbibig and hand drawing. What's the brand name of the 3/0 blade?? I need those ASAP. Thanks so much !!!!!!! Many Blessings to you.

[@GomeowCreations]

Happy to be able to help and use these blades. bit.ly/NANOSawBlades I suggest ordering the 144 set of 3/0 blades or whatever size you need, it's the best value

[@carats1976]

@@GomeowCreations thanks so much! Will do.

[@JohnDoe-sz9bk]

Dang, you're the name plate boss. Thank you for all your detailed tips!!!

[@GomeowCreations]

Lol well thanks, I know I'm not the best in the world at making them but I can do them kinda fast and they look ok. 😁👍

[@zaddyrose2525]

Thank you for your tutorials. Makes things easier for me to understand. But if I use copper or brass, does it my your skin turn green or are we allowed to shower with it ?

[@GomeowCreations]

No problems and yes copper and brass will react with people's skin. I used these metals mostly to show off how to do things in videos seeing that they are cheap. When I make stuff for people it's normally silver, sealed metals or even plated so it will not react with people. 😊

[@Raeleen]

Stunning! I always wondered how this worked. Thank you!

[@GomeowCreations]

No problem 😊

[@bonniebaillie5525]

Thank you for this! Very helpful.

[@adie_add22]

2:17 what software you use for designing?

[@GomeowCreations]

I was using a very old version of Adobe Illustrator but you can get free software like inkscape here is a link to that inkscape.org/

[@dmitrij2686]

спасибо за видео. всё рассказано очень доступно и интересно. продолжайте в том же духе!

[@GomeowCreations]

Translation: Thank you for the video. everything is told very accessible and interesting. keep up the good work! Answer: Thank you very much and I'm happy you liked it. 😁👍

[@AliceMOfficial]

Hi, I really love this video. How clear it is. I would like to buy all the equipments in the video and went to your tool recommendation, however, there are so many on the list and it is hard to find the same tools in this video for completely beginner.. Could you please specified what tools are in this video if it does not bother you? Thank you so much!

[@GomeowCreations]

What tools do you already have?

[@AliceMOfficial]

@@GomeowCreations Thank you for your reponse! I only do wire jewelries at the moment so I need to buy all of the tools from cutting, sanding. I went to your link and trying to search all of them but I assume they are not in same categories in your list so it is hard to tell what i should buy. Thank you so much for your help!!

[@GomeowCreations]

Oh ok and are you on the United States? I will try to get a list together

[@AliceMOfficial]

@@GomeowCreations Hi, yes I am in the US. You are so sweet thank you so much!!!

[@FizmaColorStudio]

Before I did not know that how it make. Nicely done hard work.

[@emmamacgregor731]

Hello, Great video! I've been trying to make pieces with my jeweller's saw and it just keeps sliding in the brass sheet and I'm getting nowhere fast. Even bees wax is no help. Do you have any suggestions, please? Thanks, M

[@no_peace]

Thank you!

[@GomeowCreations]

😁👍

[@Sergey-Master-LOMaster]

Super...master job

[@azykamorton4410]

Please make a list of what you are you using and where can you get them especially the metal thing

[@GomeowCreations]

Done, look in the description of the video for links to everything.

[@bambiixfashion]

Beautiful

[@jayceewedmak9524]

LOL That's my granddaughter's name! Take care:) Stay safe :)

[@GomeowCreations]

Haha I was waiting for someone to say something like this 😊

[@jayceewedmak9524]

@@GomeowCreations The twins are 10 so she got quite a kick out of seeing her name and having one over on her sister :D

[@haririalaa6487]

nice video..! how you protect it from tarnishing ?

[@GomeowCreations]

Thanks and we'll you can use a clean coat on it or even a clear resin might work too.

[@ProspectingMonkey]

Like shared & signed up. Thanks for the great tutorial!

[@serjiosarkuni6611]

Beautiful bro....

[@alorosa8024]

Watched your adds cause I appreciate this video

[@GomeowCreations]

Well thank you very much for doing that 😁👍 If you want to help support the channel in the future you can used my links to buy your supplies. I basically get a small commission from it at no extra charge to you 😊

[@rameshkk2377]

Super

[@GomeowCreations]

Thanks

[@ekamenglishvideo9400]

Hey there! What is the name and where can I find the smaller drill you used at around 24:00 mins? Could I use this drill to cut out the entire name instead of the saw?

[@Crochetedfantasia]

Great work! Please, what tool did you use to file the edges?

[@GomeowCreations]

I have links to all the tools I used in this video in the description. 😁👍

[@KRich408]

What brand blades do you recommend the last 2 batches I purchased are junk and break really fast even using Pepe Lube!

[@GomeowCreations]

I have used these in the past and have had little to no problems amzn.to/344dX6w I have also used these and they have been the best blades I have used ebay.to/2JxbMz2 What saw frame are you using?

[@contenderr]

GomeowCreations where did you get your saw frame?

[@KDing-te4mc]

Amazing work! How much time does this sawing work take?

[@GomeowCreations]

Hours

[@sadietracey5908]

hi. thank you for this video. was trying to do this at home and been having trouble. the saw that I got keeps breaking so I am using a home depo saw is it going to work that same? its a wider saw type too.

[@GomeowCreations]

Sadly no the thicker or wider saw will not work for this. Also that I know of Home Depot don't have the right saw blades for this at all. Breaking saw blades is normal when you are learning. I suggest practicing a lot more before trying something with this much sawing. I do make this look very easy but it's because I have 100's of hours doing it. 😁👍

[@katearapoc]

I've searched for this and i wanted to have this so bad using my own name i kenneetttt 😍

[@DramaMustRemainOnTheStage]

Pretty awesome you got to 34k in the time you did.

[@donnahart827]

Thanks for a great video.

[@elezasvlog302]

Wow great vid,

[@GomeowCreations]

Thank you

[@manishsoni-hb8hb]

Hey. This is amazing. . Just want to knw which buffing and polishing machin you use . .

[@GomeowCreations]

This might be helpful kzbin.info/www/bejne/nWrLoZmCoat9erc

[@RANJITSingh-in4of]

Jyoti punaha

[@Kamchor_hu]

Amazing video.

[@GomeowCreations]

Thanks!

[@GoodNightLois]

How do you add Melee Diamonds?

[@naikuentong7486]

Well done. 👍

[@_aos96]

what program you use to design your names ? i also do jelwery work im just starting learn ghow to cut

[@nyokamiller1536]

what's the name of your mini electric drill? great joy BTW

[@ummearham7810]

description of that cutting saw plz where to get suze n all

[@GomeowCreations]

Blades - bit.ly/NANOSawBlades Saw Frame - bit.ly/HaymakerSawFrame

[@elizabethcollins3944]

I love all your work. Can you tell me what is the gauge of the metal that you used for this ?

[@GomeowCreations]

I don't remember but I think it was like 0.8mm thick

[@Gwong-Woo]

How come you used bristle disks instead of sandpaper? Would the results be the same?

[@Bkallday111]

Super helpful video. That's some true craftsmanship! Do you recommend using 1.15 mm thick plate as the best option? Do you work harden the 1.8mm thick plate?

[@GomeowCreations]

Thanks. At 1.8mm it wouldn't matter if it was harded or not. I do suggest using a tumbler after making it to work harden it and clean it all up.

[@oc6210]

What do you call that gold metal you used?

[@GomeowCreations]

Brass

[@oc6210]

@@GomeowCreations Thank you! Can you make a complete list of needed tools to make that pendant? Coz I'm not familiar with those tools. If you don't mind :)

[@harishkalangutkar9240]

what are the equipments used ?

[@garbagegraphicsondemand]

Hey do you do jewelry for brands, so like I design and you create?

[@reasankhan7538]

Nice

[@beevoice9795]

hi again, any chance you would make a silver pendant? I'm a graphic designer, but visually impaired, cant do such delicate work anymore, I wish i could see.. what is the difference between copper and brass?? even one of them is good, she a bit allergic to metals that are not pure, i think those would work, its the first time i reach out here, have no idea how to reach you other than here, your items didn't show anything about names making .. I hope its fine to ask here .. many thanks

[@Phil-bs2fn]

Hello, can someone tell me what the tool is called at 3:15? with which I can change the font in% thank you

[@JayDub_143]

This is AWESOME I have wanted to do this for a while but I think my name would be really really difficult...lol Ja'Net (😕)

[@GomeowCreations]

Haha yeah you might need to get creative with it or maybe do it in 2 parts and connect them together using a jump ring could be an interesting solution.

[@JayDub_143]

@@GomeowCreations lol ooooorrrr. Maybe leave the ' out and just do JaNet... 😳

[@dmitrij2686]

чем сложнее задача, тем интересней искать решение ))

[@kimmore1681]

Thank you so much

[@fallenslave6684]

thank you so much

[@GomeowCreations]

No problem

[@spillaz7663]

Where to buy material use for name necklace

[@jjcenecediaz.1224]

Fantastic.

[@yagamilight6261]

Is it more difficult with stainless steel?

[@GomeowCreations]

Yeah it would be a lot harder to cut it from stainless steel.

[@yagamilight6261]

@@GomeowCreations Even at .6mm thick?

[@GomeowCreations]

Yep, you will dull the blade super quick

[@__Art._gallery____08]

Acrylic gold annoo use cheythittullathh

[@SumarGaming]

What size of drill bit use you

[@davairharris2613]

Did u use brass plate?

[@GomeowCreations]

Yeah this was a sheet of brass

[@davairharris2613]

Any discoloration from wearing?

[@GomeowCreations]

Oh yeas it will react with skin and turn it green over time. I used brass for the video, this would be better made from silver or gold.

[@SIRA063]

what do you do with the left over gold dust?

[@GomeowCreations]

This was made from brass not gold but you can use it for inlay work or even melt it back into solid metal.

[@SIRA063]

@@GomeowCreations do you have to rig your work desk so that allpossible gold dust particles or any particles are collected? like some sort of bucket under your station?

[@GomeowCreations]

I have a workbench now that has a catch of metals so when I cut things it will all fall into that

[@sudeshchauhan6575]

Nice 👌

[@N013GS]

How would you go about fixing a name plate that broke apart?

[@GomeowCreations]

Make a new one or solder it together

[@N013GS]

@@GomeowCreations you have any videos of how to go about soldering?

[@charlottewhite6741]

Do you make bespoke name rings too? Could you do a tutorial for that? Great channel! Very informative! So glad I found it 🙂

[@LilyJ323]

Your tips are great. Please can you give me the list of the tools used?