GOOD Floor Jack Pad Slotted For Pinch Weld - ARCAN Jack

[@FULLTHROTTLEAUTO]

I can't believe this type of pad still doesn't come with jacks. Great video as always.

[@tanker242]

I own this jack too. Got it on sale around 8 years ago at Costco around $100. It's definitely a trooper.

[@PaulieWalnutss]

I have used a hockey puck for many years with great results

[@enr1997widget]

Thanks for making these videos! I actually bought this same jack from costco after watching your video on it. Im definitely buying one of these. Thanks again!

[@Jasserv]

I normally use a Hockey Puck but this is awesome. Ordered one!

[@watuzi]

Nice accessory for any floor jack, thanks.

[@invis7150]

Thanks for your video, very informative and I appreciate the dimensions that you provided.

[@apj3863]

Any pads like this for the UK? Great video!

[@kovie9162]

Is this the same jack as the Husky aluminum/steel hybrid? I just bought it along with a similar style puck but it fits loosely and falls off easily, and this appears to be a tight fit.

[@dirtmcgirt7125]

My car is too low so it is difficult to get the hydraulic high enough to clear the jack stands to get them underneath the pinch welds. Is there jack pad that adds a couple of inches to the floor jack WITHOUT the risk of the jack pad slipping off of the factory jack points?

[@thegamer570]

Would this work if my outside diameter is 4 inches?

[@loghome7061]

Will this fit if you don't remove the original pad?

[@jlat31]

How much does this pad add to the original?

[@TheDopalgangr]

nice add-on, only drawback is now your low-profile jack becomes a regular height style

[@schifoso]

My Torin jack saddle inner diameter is 3.25 inches so this pad won't fit. Haven't found a pad that will fit properly.

[@Dylan-kw4ol]

Morning

[@LoveLikeaHurricane]

Will this work for the square shape of the Daytona jacks from Harbor freight?

[@dahut3614]

Picture of linked product appears to have one deep and one shallow groove. The deep groove is interrupted by the shallow groove(?!). Are you *sure* that's the one you have?

[@dial2fast]

The original one I reviewed is no longer available on Amazon. The link is another one I found with very similar design.

[@raczyk]

Grooves don't look very feel for my pinch welds. I have a 2017 civic. Has anyone used it with civic pinch welds?

[@md0015]

How deep are the grooves on which the pinch weld rests? My problem is that most of the pads available are too deep for my car.

[@nitrous07me]

Dang my floor jack didn’t even come with a pad, I’ll measure mine & see if it’ll fit, thanks good looking out 👍👏

[@missyd0g2]

nitrous07me Me too. This video is what makes KZbin great. Merry Christmas and Happy 2020

[@patdud1979]

How did this arcan floor jack over time? Thx

[@jlat31]

I’ve had mine for 12 yrs

[@GONEWILDFILMS]

Got the same jack, will be getting one of these. Would you happen to know if there is a floor jack extension for this model ??? Thanks for the awesome review.

[@Menga213]

Where did you get the jack? How much?

[@Mr.SisterFisster]

I have this jack and same pad. Lifted my truck by the rear axle and ended up having it slip off. Nearly sent the jack into the fuel tank. No good. With the original pad the metal teeth of the cup of the jack stuck up a bit more, so no way something like an axle will slide off. I am now looking for an OEM replacement and toss this pad in the trash.

[@Tim._..]

It is really meant to be used on the pinch weld. The other thing is you need the jack to be perpendicular to the way the car will move when lifted so that the jack can move straight back with the car, if it is diagonal then the jack pad will deform (also do this without a jack pad). When I lift from other strong lift points that aren't a pinch weld, I don't use any rubber pad and just use a small folded rag.

[@marke.1021]

And when saw title thought you were going to get tire from side of the freeway and cut it to fit. While I am cheap not quite that cheap for under $10 can click and buy.

[@mg8718]

Ive never had any need to use a pad on that pinch weld. Take of the damaged pad and throw it in the trash. You dont need any fukin pad.