GoodWe Zero Export Solution

Zero Export Solution For Single Inverter.
This solution applies for both single-phase and three-phase inverter with GM meters and HomeKit series.
0:00 introduction
0:58 1.standard solution: Single-phase inverter + CT-90
01:42 2.retrofit solution: Single-phase inverter + GM1000
02:58 3.retrofit solution: Single-phase inverter + HomeKit 1000
03:30 Export/Power Limit Setting on SolarGo APP
04:01 ending

[@Carl-Camera]

If I install GM1000 to new model GW5000-DNS-30 inverter, will I see consumption in the SEMS app?

[@maikovandeneynde4747]

i did the meter test and then it says ct1 connection error. since then my battery wont charge or unload. before the test everything worked fine???

[@bertweeb1989]

Hello, so are there any split Phase models? And do they support zero export?

[@GoodWeSolarAcademy]

Yes, our MS G3-US supporting zero export:en.goodwe.com/ms-us

[@Selo_T]

Can the zero export function work without having installed the home kit? That is, by just configuring it on the app?

[@GoodWeSolarAcademy]

Sorry, it is necessary to use Home-kit, because we need smart meter and CT to measure the power import&export to grid.

[@sectronic2947]

Does the GW10K-ET support three phase asymmetric true physical zero export? Regulated by state that no power should go back into the grid (not sum zero) but true physical zero export?

[@GoodWeSolarAcademy]

Yes, it can support the three-phase unbalanced output function. Our inverter can prevent energy backflow to the grid with the anti-backflow function.

[@sectronic2947]

@@GoodWeSolarAcademy sounds good. In the pdf papers it doesn't mention anything like that

[@msalman373]

Hello, I want to see the consumptions in the app. Can i see it by adding CT 90 or GM 1000 ?

[@msalman373]

Still waiting for reply of my question.

[@GoodWeSolarAcademy]

No, if you want to see the consumption of CT90 or GM3000, SEMS cannot support it.

[@msalman373]

@@GoodWeSolarAcademy Thank you for your response. Then what I have to do to get the consumption data. I know by adding homeKit i can get consumption data. but it is expensive. any other economical solution ?

[@GoodWeSolarAcademy]

@@msalman373 Sorry, we have no other solutions for now.

[@nguyentuyen3168]

Does gw2000-xs support zero export? Thanks

[@GoodWeSolarAcademy]

Yes, it does

[@juliofuentes8515]

Hola, para inversor GW3000-NS existe solución para inyección 0?

[@GoodWeSolarAcademy]

Sí, puede utilizar GM3000-NS+ CT /GM1000+ CT para conseguir

[@juliofuentes8515]

@@GoodWeSolarAcademy estimados aca en Chile, me dicen que para este inversor no se puede la inyección 0, S/N: 93000SSN173W2657 Check code: 058027, Grid-connected standard: VDE0126-1-1; AS/NZ 4777.2:2015; G83-2 EN 50438; ERDF-NOI-RES_13E, me podrían ayudar por favor.