GoPed and Small Engine Motor Carb Tuning Adjusting

Here’s a simple guide that works great for me on tuning a carb. Settings are different for each carb, but the way you tune it should all be the same. Once running and tuning for peak power/performance your turns on the needles should be smaller. This carb is a WT-990 commonly used on GoPed scooters.

[@johncprojects5414]

Finally someone has explained it were u can actually understand thank you.

[@jezzeestewart3712]

Thank you for saving me from how much stress I was able to fix it

[@jcolv16]

Thanks Chris! solid video--- appreciate it

[@christophersanchez2698]

Glad it worked out 💪🏼

[@User37621]

Good idea with white out 🤙🏻

[@pedkesachix8366]

Nice bro

[@louiecabadas812]

What’s a great carb out there ? New to go ped . Nice video 👌🏽

[@christophersanchez2698]

Depends on engine size, porting, pipe etc

[@harryfp1494]

If you close the jets then close the choke almost completely. Then make quarter turns and pull it then repeat you can get a great mixture and really dial it in

[@Yeer718]

Thank you

[@lake3913]

Thank you!!

[@christophersanchez2698]

Glad to hear it worked for you

[@mrjaybennett80]

I have never even seen one of these on a 15mm carb before

[@Chris-kk6ek]

Does the work on zenoah g320rc engine

[@SuperJiggawhat]

I have a w668 that keeps over fueling on me. Any suggestions? It's a new engine and new carb if that helps.

[@christophersanchez2698]

Double check tune. Or incorrect pop off for engine

[@Mac-rp5gk]

Do you know if the 813 Walbro carb is good or not in new to gopeds

[@christophersanchez2698]

813 Is very tricky to tune due to the internal accelerator pump. 990 is same specs but without pump. Try that better

[@nathanw5747]

Are these the base settings for most g23lh? What about a s g230rc?

[@christophersanchez2698]

It’s a good starting point for any size engine.

[@nathanw5747]

​@Christopher sanchez what about 1107 carbs ?

[@MICKEY56ACE-SKOLNATION-]

Hey will this fit on the G230 rc goped?

[@toonsszn8418]

Miguel Gonzalez yes

[@turanvarolsun747]

i have same use 4x4 best setting for that

[@Chris-kk6ek]

I hope this fixes my carb on my losi dbxl 2.0 gas i was stupid when i bought my rc to out of the box messing with the high and low needles after watching this video hopefully i can get my carb right the damn rc shops charge 90.00 per hour highway robbery

[@simongowan9845]

1 and haf tuns on lots carbs

[@turanvarolsun747]

4x4 best

[@MD-tr8fn]

Does this work for zenoah 290

[@christophersanchez2698]

Yes sir

[@benjamincosio8986]

@@christophersanchez2698 i have the same motor and need to adjust the idle, can you explain how to do that?

[@MD-tr8fn]

@@benjamincosio8986 yea I need to know too

[@benjamincosio8986]

@@MD-tr8fn I figured it out. You just turn it super far left start the motor and it will idle super high. Then you start turning towards the right as it’s idling until you feel it is idling at the right rpm

[@ssteam-lw5pi]

@@christophersanchez2698 how about cy 290rc

[@OBARRVAGOS]

My go ped scooter don’t want to start no more new plug and full lines and gas oil is good it wants to start but it won’t please help ☹️☹️

[@benmurden5304]

same problem

[@kingplayz9532]

Did u ever fix it

[@OBARRVAGOS]

@@kingplayz9532 no going to have to take it to the scooter shop when I have money .

[@kingplayz9532]

Try getting a new carb

[@kingplayz9532]

@orange boy 714

[@socalstandups8459]

What carb is this

[@andrewv2122]

Kawi 550 Life 990

[@christophersanchez2698]

Kawi 550 Life wt990 sir

[@lake3913]

Was just about to throw away my goped lol